Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 1210442 is a Size 60 industrial component featuring a 1:1 gear ratio, a transferable torque of 3 Nm, and a maximum rotational speed of 6000 rpm. This RoHS compliant unit incorporates a mass moment of inertia of 26.7 kgmm², a no-load driving torque of 0.07 Nm, an actuator interface code of D40B, and a motor-in interface code of 57A with an IP40 degree of protection. Operating within an ambient temperature range of -10 °C to 60 °C, it supports any mounting position and complies with VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 1273902 industrial component is constructed with a wrought aluminum alloy plate and features a RoHS-compliant material build. This part accommodates any mounting position and complies with VDMA24364-B1/B2-L LABS (PWIS) conformity alongside a corrosion resistance class (CRC) rating of 2 for moderate corrosion stress. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1210438 is a size 60 industrial component featuring a 1:1 gear ratio, a transferable torque of 3 Nm, and a maximum rotational speed of 6000 rpm. This RoHS-compliant unit weighs 1040 g, incorporates actuator interface code D40B and motor-in interface code 55A, and operates within an ambient temperature range of -10 °C to 60 °C with IP40 protection. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 12639 is an industrial component featuring an aluminum housing and screwed plug with a 1/4 NPT pneumatic connection, operating at pressures from 0 MPa to 1 MPa (0 bar to 10 bar, 0 psi to 145 psi). This RoHS-compliant unit operates within an ambient temperature range of -10 °C to 70 °C, delivering a flow rate of 3000 l/min with respect to the atmosphere while utilizing compressed air as per ISO 8573-1:2010 [7:-:-]. With a product weight of 17 g, a noise level of 78 dB(A), and a CRC rating of 1, it supports any mounting position and allows for lubricated operation. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered with a 1:1 gear ratio and a maximum rotational speed of 6000 rpm, this Festo industrial component features a size 60 design with D32B actuator and 60R motor-in interface codes. The unit supports a transferable torque of 3 Nm, a no-load driving torque of 0.07 Nm, a mass moment of inertia of 26.7 kgmm², and an overall product weight of 1140 g with IP40 degree of protection. It complies with VDMA24364 Zone III LABS conformity, RoHS material requirements, and operates within ambient temperatures from -10 °C to 60 °C in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 12638 is an industrial component featuring a 1/8 NPT pneumatic connection, an aluminum housing and screwed plug, and a product weight of 8 g. It delivers a flow rate of 1450 l/min with respect to the atmosphere and operates within a pressure range of 0 MPa to 1 MPa across an ambient temperature range of -10 °C to 70 °C. Designed for any mounting position, this unit operates on compressed air conforming to ISO 8573-1:2010 [7:-:-] with lubricated operation possible, while maintaining a corrosion resistance class of 1 and a noise level of 74 dB(A). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 1210419, features size 60 dimensions, a 1:1 gear ratio, and a mass moment of inertia of 26.7 kgmm² with a product weight of 1160 g. The unit supports any mounting position, a maximum rotational speed of 6000 rpm, a no-load driving torque of 0.07 Nm, and a transferable torque of 3 Nm while utilizing actuator interface code D32B and motor-in interface code 57A. Operating within an ambient temperature range of -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and 0 to 95% relative air humidity, it achieves an IP40 degree of protection, VDMA24364 Zone III LABS conformity, and RoHS material compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1210305 industrial component features a wrought aluminum alloy plate construction with a corrosion resistance class (CRC) of 0 for environments with no corrosion stress. This RoHS compliant part adheres to VDMA24364-B1/B2-L LABS (PWIS) conformity standards and requires a maximum tightening torque of 0.6 Nm both generally and for valve mounting. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo Hollow bolt VT-1/4-AJ-P, designated by part number 12635, features chromated steel hollow bolt material and complies with RoHS material regulations. This industrial component conforms to LABS (PWIS) VDMA24364-B1/B2-L standards as documented in the official Festo EN-US data sheet. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 1210126, features a size 60 frame with a 1:1 gear ratio, a transferable torque of 3 Nm, and a maximum rotational speed of 6000 rpm. The unit weighs 1050 g, incorporates an actuator interface code of D32B with a motor-in interface code of 55A, and is built with a mass moment of inertia of 26.7 kgmm² alongside a no-load driving torque of 0.07 Nm. It operates within an ambient temperature range of -10 °C to 60 °C, supports storage temperatures from -25 °C to 60 °C at 0 to 95% relative air humidity, meets IP40 and VDMA24364 Zone III LABS conformity, and complies with RoHS material standards in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo hollow bolt VT-1/8-AJK-P features a chromated steel construction and adheres to VDMA24364-B1/B2-L LABS (PWIS) conformity standards. This component complies with RoHS material regulations as outlined in the official Festo data sheet. Submit your required quantity and application details for an RFQ on part number 12634.
View product details →
Festo
The Festo 1210037 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F03 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at pressures up to 8 bar with a nominal working pressure of 5.6 bar, this unit conforms to VDI/VDE 3845 (NAMUR) for valve connection and supports any assembly position using compressed air in accordance with ISO 8573-1:2010 [7:4:4]. It is rated for SIL 3 Low Demand mode and carries ATEX certifications for gas (II 2G c T4 X) and dust (II 2D c 125°C X) within an ambient temperature range of -20°C to +80°C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo Hollow bolt VT-1/8-AJ-P is an industrial component featuring chromated steel hollow bolt material and RoHS compliant material construction. This part meets VDMA24364-B1/B2-L LABS (PWIS) conformity standards per the official Festo data sheet. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 12618 is an electrical 5/2-way monostable industrial component featuring a plate seat structural design and a nominal width of 7 mm. This piloted valve operates across a pressure range of 0 bar to 8 bar, delivers a normal nominal flow rate of 1000 l/min through 1/4 NPT pneumatic working ports, and utilizes an IP65 degree of protection with an adjustable exhaust air function. Operating voltage is supplied via a solenoid coil ordered separately, and the unit includes a detenting manual override, mechanical spring reset, and external pilot air supply. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 1210036 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and a maximum working pressure of <= 8 bar, this unit operates with compressed air according to ISO 8573-1:2010 [7:4:4] in any assembly position. Certified for hazardous environments with ATEX category Gas II 2G and Dust II 2D ratings within an ambient temperature range of -20°C to +80°C, it includes a NAMUR-standard valve connection and supports up to SIL 3 Low Demand mode. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 1210035 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle without cushioning or position detection. Built with a valve connection based on VDI/VDE 3845 (NAMUR), it operates at a nominal working pressure of 5.6 bar and a maximum working pressure of 8 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4], while supporting lubricated operation if subsequently required. This unit offers ATEX certification for Gas (II 2G c T4 X) and Dust (II 2D c 125°C X) with an explosion-proof ambient temperature range of -20°C to +80°C and achieves Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode in any assembly position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 12617 is an electrical, 5/2-way monostable industrial component featuring a plate seat structural design and a 26 mm width. This piloted valve operates across a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) with a normal nominal flow rate of 500 l/min and incorporates an external pilot air supply port alongside an adjustable exhaust air function. Certified as c UL us - recognized (OL) with an IP65 degree of protection, it utilizes soft sealing and requires a solenoid coil ordered separately for its operating voltage. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1210034 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit accommodates compressed air media meeting ISO8573-1:2010 [7:4:4] standards and supports lubricated operation. It includes a VDI/VDE 3845 NAMUR-compliant valve connection, features ATEX category II 2G and II 2D gas and dust explosion protection for ambient temperatures between -20°C and 80°C, and provides Safety Integrity Level up to SIL 3 in Low Demand mode without position detection. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 12612 is an industrial component featuring a round, standard suction cup with an 8 mm diameter, a 5.5 mm effective suction diameter, and a 2 mm nominal size. Constructed with a TPE-U(PU) transparent suction cup of 60 +/- 5 Shore hardness and a brass screw-in stud, this assembly utilizes an M5 mounting thread, M5 suction cup mounting, and a PK-3 side vacuum connection. It operates with atmospheric air based on ISO 8573-1:2010 [7:-:-] within an ambient temperature range of -20 to 60 °C, delivering a breakaway force and retention force of 1.6 N at 70% vacuum and nominal operating pressure. The materials conform to RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 1209006, features a holder 1 diameter of 38 mm and a holder 2 diameter of 80 mm with actuator interface code M80 and coupling housing interface code 80A. Weighing 23 g and compliant with RoHS materials standards, it conforms to VDMA24364-B2-L LABS (PWIS) requirements and can be installed in any mounting position. The part operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →