Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 1208961 is a single-acting rack and pinion industrial component featuring a size 15 actuator, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit is rated for use in ATEX category II 2G and II 2D hazardous environments within an ambient temperature range of -20°C to 80°C. It connects via a NAMUR standard valve connection and utilizes compressed air in accordance with ISO 8573-1:2010 [7:4:4], supporting lubricated operation and achieving safety integrity levels up to SIL 3 in low demand mode. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 12610 is an industrial component weighing 14 g with a reinforced PA6 housing material. It features a Form B electrical connection in accordance with the 11 mm industry standard, operating at a nominal voltage of 24 V DC and 24 V AC across a mains frequency of 0 Hz to 60 Hz with permissible voltage fluctuations of +/-15%. This component provides an IP65 degree of protection as per IEC 60529, functions within an ambient temperature range of -20 °C to 60 °C, and maintains VDMA24364-B2-L LABS (PWIS) conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 1208960 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar with a maximum working pressure of 8 bar, this unit accommodates any assembly position and utilizes compressed air matching ISO 8573-1:2010 [7:4:4] standards with lubricated operation possible. Certified for hazardous locations, it meets ATEX category II 2G for gas and II 2D for dust, supports Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode, and functions within an ambient temperature range of -20°C to 80°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 12595 industrial component functions as a pneumatic/electric pressure transducer measuring relative pressure within an operating pressure range of -0.095 MPa to 0 MPa and accepting compressed air media conforming to ISO 8573-1:2010 [7:4:4] at temperatures from 0 °C to 60 °C. Operating on AC and DC voltage ranges of 12 V to 250 V with a contact-based switching output featuring a changeover switch element function, this unit provides a fixed hysteresis threshold value with a switch-on point of -0.25 bar, a switch-off point of 0.1 bar, and a maximum switching frequency of 1 Hz under a minimum load current of 100 mA. Built to conform to EN 60947-5-1 standards, the device carries CE marking per the EU low voltage directive and UKCA marking per UK electrical equipment instructions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1208959 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and a maximum working pressure of <= 8 bar, this device accommodates compressed air conforming to ISO 8573-1:2010 [7:4:4] in any assembly position. It includes a NAMUR-standard valve connection based on VDI/VDE 3845, achieves Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode, and carries ATEX certifications for explosive atmospheres within an ambient temperature range of -20°C to +80°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 1259496 is a size 50 double-acting pneumatic industrial component featuring a 3-point gripper function with three jaws and a 6 mm stroke per jaw. Operating at a pressure range of 4 bar to 8 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4], it achieves a repetition accuracy of 0.04 mm, a max operating frequency of 4 Hz, and a gripping force backup during closing. Position sensing is accomplished via proximity switch, supporting any mounting position and a structural lever design with positively driven motion sequence. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1208958 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal pressure of 5.6 bar and working pressures up to 8 bar, this unit includes a NAMUR-standard valve connection, SIL 3 Low Demand mode safety integration, and ATEX certification for explosive gas and dust environments ranging from -20°C to +80°C. It functions in any assembly position using compressed air matching ISO8573-1:2010 [7:4:4] standards, with lubricated operation supported if maintained for subsequent cycles. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo size 10 single-acting industrial component features a rack and pinion design structure with an F04 flange hole pattern and a 90-degree swivel angle without cushioning. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] at a nominal working pressure of 5.6 bar and maximum 8 bar, this ATEX-certified unit (II 2G c T4 X and II 2D c 125°C X) functions within an ambient temperature range of -20°C to 80°C and supports SIL 3 Low Demand mode safety integration. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1259495 is a double-acting industrial component featuring a 3-point gripper function with three gripper jaws, a size 50 designation, and a stroke of 6 mm per gripper jaw. Operating at pressures from 2 bar to 8 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4], this positively driven lever-designed pneumatic gripper achieves a repetition accuracy of 0.04 mm, a maximum operating frequency of 4 Hz, and gripping forces up to 840 N opening and 750 N closing at 6 bar. Position sensing is accomplished via a proximity switch, while structural tolerances include a maximum interchangeability of 0.2 mm, rotational symmetry of 0.2 mm, jaw angular play of 0.2 degrees, and jaw backlash of 0.02 mm. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1207666 is a size 10 single-acting rack and pinion industrial component featuring an F04 flange hole pattern and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit supports compressed air per ISO 8573-1:2010 [7:4:4] with optional lubricated operation in any assembly position. Certified for hazardous locations under ATEX category II 2G for gas and II 2D for dust within an ambient temperature range of -20°C to +80°C, it includes a NAMUR-standard valve connection and achieves SIL 3 Low Demand mode safety integrity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1259494 is a double-acting 3-point pneumatic gripper featuring a size 32 design with a stroke of 3.9 mm per gripper jaw and a gripping force backup during closing. Constructed with a lever structural design and positively driven motion sequence, this component operates within a pressure range of 4 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4] and achieves a maximum operating frequency of 4 Hz with position sensing via a proximity switch. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo size 10 single-acting rack and pinion industrial component features an F04 flange hole pattern and a 90-degree swivel angle without cushioning, operating at a nominal working pressure of 5.6 bar and a maximum working pressure of ≤ 8 bar. Certified for hazardous locations, it carries ATEX category II 2G and II 2D ratings with explosion ignition protection types c T4 X and c 125°C X across an ambient temperature range of -20°C to +80°C, supporting SIL 3 Low Demand mode safety integrity levels. This unit operates on compressed air meeting ISO 8573-1:2010 [7:4:4] standards with NAMUR-based valve connections in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 1259493 is a double-acting, 3-point pneumatic gripper featuring a lever structural design with a positively driven motion sequence and size 32 dimensions. This component delivers a gripping force per jaw at 6 bar of 405 N opening and 345 N closing, operates within a pressure range of 2 bar to 8 bar on compressed air conforming to ISO 8573-1:2010 [7:4:4], and includes position sensing via proximity switch for any mounting position. Request a quote today by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo part number 1207664 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to or equal to 8 bar, this unit accommodates any assembly position and conforms to VDI/VDE 3845 (NAMUR) standards for valve connections. Certified with ATEX categories II 2G and II 2D for explosive environments spanning -20°C to +80°C, it functions with compressed air meeting ISO8573-1:2010 [7:4:4] specifications and supports low demand mode safety integrity levels up to SIL 3. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo size 16 industrial component is a double-acting, 3-point pneumatic gripper featuring a lever structural design with a positively driven motion sequence and a stroke per gripper jaw of 2.5 mm. It operates within a pressure range of 4 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], delivering a repetition accuracy of 0.04 mm, a maximum operating frequency of 4 Hz, and a gripping force backup during closing. The device includes provisions for position sensing via Hall sensor, allows for any mounting position, and accommodates oil lubrication for operating and pilot media. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
Engineered with a brass screwed plug and a bronze cushioning insert, this Festo industrial component features a 10-32 UNF-2A pneumatic connection and operates within a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar). It delivers a flow rate of 260 l/min with respect to atmosphere while generating a noise level of 71 dB(A) across an ambient temperature range of -40 °C to 80 °C. The unit supports compressed air operating media according to ISO 8573-1:2010 [7:-:-] with optional lubricated operation, carries a CRC rating of 1, and conforms to VDMA24364-B2-L LABS standards at a product weight of 1.7 g. Submit part number 1206994 with your required quantity and application specifications to request a quote.
View product details →
Festo
The Festo part number 1206992 is an industrial component featuring a 1/2 NPT pneumatic connection, a bronze cushioning insert, and a brass screwed plug with a product weight of 46 g. It operates within a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) and an ambient temperature range of -40 °C to 80 °C, delivering a flow rate with respect to atmosphere of 9240 l/min while generating a noise level of 85 dB(A). Designed for compressed air operating medium as per ISO 8573-1:2010 [7:-:-] with lubricated operation possible, this RoHS compliant component has a corrosion resistance class of CRC 1 and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo size 16 industrial component is a double-acting, 3-point pneumatic gripper featuring a lever structural design with positively driven motion sequence and position sensing for Hall sensors. It operates at pressures from 2 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], delivering a maximum operating frequency of 4 Hz with a repetition accuracy of 0.04 mm. The unit provides a stroke of 2.5 mm per gripper jaw, a maximum interchangeability of 0.2 mm, a rotational symmetry of 0.2 mm, a maximum gripper jaw backlash Sz of 0.02 mm, and a maximum angular play ax, ay of 0.5 deg. At 6 bar, the opening gripping force is 120 N and 40 N, the closing gripping force is 87 N and 29 N, while the minimum opening and closing times are 26 ms and 42 ms respectively, with any mounting position supported. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo industrial component, part number 1206991, operates with compressed air as per ISO 8573-1:2010 [7:-:-] across a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) and supports a flow rate of 5365 l/min with respect to the atmosphere. Featuring a 3/8 NPT pneumatic connection, a bronze cushioning insert, and a brass screwed plug, this 29 g RoHS-compliant part functions in ambient temperatures from -40 °C to 80 °C with a noise level of 83 dB(A). It offers any mounting position, a corrosion resistance class of CRC 1, VDMA24364-B2-L LABS conformity, and permits lubricated operation. Submit your exact part number, quantity, and application requirements to receive a quote for this pack size of 10.
View product details →
Festo
The Festo 12594 is a pneumatic-to-electric pressure transducer engineered to measure relative pressure across a range of -1 to 0 bar, operating within a working pressure of -0.95 to 0 bar and temperatures from 0 to 60 °C. Featuring a changeover switch with a switch-on point of -0.25 bar and a switch-off point of <= 0.1 bar, this industrial component supports AC and DC operating voltages from 12 to 250 V via a screwed terminal electrical connection. It accommodates compressed air in accordance with ISO 8573-1:2010 [7:4:4], allows lubricated operation, and carries CCC authorization alongside the CE symbol according to the EU low voltage guideline. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →