Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8143167 is an industrial component featuring a screwed-on mounting plate designed for open convection or vertical mounting positions with a product weight of 2200 g. It includes green, yellow, and red LED displays alongside optional CDSB operator units, while conforming to standards such as EN 61800-3, EN 61800-5-1, EN 61800-5-2, and EN ISO 13849-1 with TÜV, c UL us-Listed (OL), and RCM certifications. The unit operates within ambient temperatures from 0 °C to 50 °C and storage temperatures from -25 °C to 55 °C, requiring power derating above 40 °C ambient or 1000 m installation height under an IP20 degree of protection and overvoltage category III. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo 8124457 is an electromechanical linear axis featuring a ball screw with a 16 mm screw diameter, 10 mm/U spindle pitch, and 600 mm working stroke. Built with a recirculating ball bearing guide, this size 120 industrial component achieves a maximum speed of 0.5 m/s, a maximum rotational speed of 3000 rpm, a repetition accuracy of ±0.02 mm, and a 100% duty cycle in any mounting position. It conforms to VDMA24364 Zone III LABS conformity, meets ISO 14644-1 Class 8 cleanroom standards, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8135822 is an industrial component featuring a PA and steel housing with an IP65 degree of protection, an M12x1 A-coded electrical connection, and a knurled nut mounting type for any mounting position. Operating on 24 V DC with a 100% duty cycle, the solenoid coil draws a nominal pick-up current of 108 mA up to 80 ms and a reduced current of 15 mA thereafter, exhibiting coil characteristics of 0.36 W in the low-current phase and 2.6 W in the high-current phase. This component includes an LED signal status display, H-class enameled wire insulation, a maximum switching frequency of 5 Hz, permissible voltage fluctuations of +/- 10%, and a maximum cable length of 30 m within an ambient temperature range of -10 °C to 60 °C. Certified with the RCM compliance mark and CE marking per the EU EMC directive, it features a moderate corrosion resistance class (CRC 2), VDMA24364-B1/B2-L LABS conformity, and RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8141732 is an industrial miter gear component featuring an 8:1 gear ratio, a 40 mm gearbox and motor flange size, and a 40G output shaft interface alongside a 40P actuator interface. It delivers a continuous output torque of 6 Nm, a maximum output torque of 10 Nm, a maximum actuator speed of 18,000 rpm, and a maximum efficiency of 92 percent while maintaining a torsional backlash of 0.35 degrees and a torsional rigidity of 0.7 Nm/arcmin. Weighing 500 g with a mass moment of inertia of 0.032 kgcm², the unit supports permissible axial and radial shaft loads of 200 N each, operates within a temperature range of -25 °C to 90 °C, provides IP54 protection, complies with VDMA24364-B2-L LABS conformity, and utilizes RoHS-compliant materials. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8143166 is an industrial component with a product weight of 2100 g featuring a screwed-on mounting plate for vertical or open convection mounting positions and an IP20 degree of protection with an overvoltage category III. It includes green, yellow, and red LED displays, optional CDSB operator unit control elements, and operates within an ambient temperature range of 0 °C to 50 °C and storage temperatures from -25 °C to 55 °C at 5% to 90% non-condensating relative air humidity up to a maximum installation height of 2000 m. This unit conforms to standards EN 61800-3, EN 61800-5-1, EN 61800-5-2, and EN ISO 13849-1, is based on norms EN 50581, EN 60204-1, EN 61508-1 through EN 61508-7, EN 61800-2, and EN 62061, holds TÜV, c UL us-Listed (OL), and RCM compliance certifications, and carries CE marking per EU EMC, machinery, and RoHS directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8124456 is an electromechanical linear axis featuring a ball screw with a 16 mm screw diameter, a 10 mm/U spindle pitch, and a 120 size classification. This unit delivers a 550 mm working stroke, a 150 µm reversing backlash, a ±0.02 mm repetition accuracy, and operates at a 100% duty cycle with a maximum speed of 0.5 m/s, a maximum rotational speed of 3000 rpm, and a maximum acceleration of 15 m/s². Equipped with a recirculating ball bearing guide and compatible with stepper or servo motors, the axis mounts in any position and meets ISO 14644-1 Class 8 cleanroom standards, VDMA24364 Zone III LABS conformity, and F1a Li-ion battery production suitability with restricted copper, zinc, and nickel usage. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 40 mm planetary gear set features a 20:1 gear ratio, a 0.31 deg torsional backlash, and a 1 Nm/arcmin torsional rigidity. This IP54-rated industrial component handles a continuous output torque of 20 Nm, a maximum output torque of 32 Nm, and a maximum actuator speed of 18000 rpm while maintaining up to 96 % efficiency across an operating temperature range of -25 °C to 90 °C. The unit weighs 450 g with a gearbox mass moment of inertia of 0.018 kgcm², supporting 200 N of both permissible axial and radial shaft load alongside RoHS-compliant material construction. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8143165 is an industrial component featuring screw-on mounting plate installation for open convection or vertical mounting positions, weighing 2100 g with an IP20 degree of protection and overvoltage category III. It includes green, yellow, and red LED displays alongside optional CDSB operator units, while conforming to standards EN 61800-3, EN 61800-5-1, EN 61800-5-2, and EN ISO 13849-1 with RCM, TÜV, and c UL us-Listed (OL) certifications. Operating parameters encompass ambient temperatures from 0 °C to 50 °C with derating above 40 °C, non-condensing relative air humidity between 5 and 90%, and a maximum installation height of 2000 m subject to power reduction above 1000 m. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8141730 is an industrial component featuring a 40 mm gearbox and motor flange size, a 12:1 planetary gear set ratio, and a torsional backlash of 0.31 degrees. This RoHS compliant part delivers a continuous output torque of 20 Nm, a maximum output torque of 32 Nm, and operates at a maximum actuator speed of 18000 rpm across temperatures from -25 °C to 90 °C. Weighing 450 g with an IP54 degree of protection, it achieves a maximum efficiency of 96% and supports a permissible axial and radial shaft load of 200 N each. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8124455 is an electromechanical linear axis featuring a ball screw with a 16 mm screw diameter, a 10 mm/U spindle pitch, and a 500 mm working stroke. Designed with a size 120 structural layout, a recirculating ball bearing guide, and a 150 µm reversing backlash, this component supports stepper or servo motors while achieving a maximum speed of 0.5 m/s, a maximum rotational speed of 3000 rpm, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.02 mm at a 100% duty cycle. Featuring any mounting position, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 8 cleanroom suitability, and reduced Cu/Zn/Ni values making it suitable for Li-ion battery production, the unit excludes specific metals by mass with designated exceptions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8141729 is an industrial component featuring a 40 mm gearbox flange size, a 40 mm motor flange size, and an 8:1 gear ratio planetary gear set that delivers a continuous output torque of 6 Nm and a maximum output torque of 10 Nm. Built with a product weight of 350 g, a mass moment of inertia of 0.015 kgcm², and an IP54 degree of protection, this unit operates within a temperature range of -25 °C to 90 °C while accommodating a maximum actuator speed of 18000 rpm and 200 N of both permissible axial and radial shaft load. It achieves a torsional backlash of 0.25 deg, a torsional rigidity of 0.85 Nm/arcmin, and a maximum efficiency of 96% while maintaining VDMA24364-B2-L LABS conformity and RoHS material compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Manufactured by Festo as part number 8143164, this industrial component features screwed-on mounting plate installation designed for open convection or vertical mounting positions with an IP20 degree of protection and an overvoltage category III rating. The unit weighs 1400 g, incorporates green, yellow, and red LED indicators, and supports an optional CDSB operator unit while operating within ambient temperatures from 0 °C to 50 °C and storage temperatures from -25 °C to 55 °C. Certified by TÜV, c UL us Listed (OL), and the RCM compliance mark, it conforms to EN 61800-3, EN 61800-5-1, EN 61800-5-2, and EN ISO 13849-1 standards alongside multiple EN norms and CE directives. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
The Festo 8124454 is an electromechanical linear axis featuring a ball screw with a 16 mm screw diameter, a 10 mm/U spindle pitch, and a 450 mm working stroke. Designed with a recirculating ball bearing guide and a reversing backlash of 150 µm, this size 120 component supports any mounting position, a 100% duty cycle, and compatible stepper or servo motors delivering a maximum acceleration of 15 m/s², a maximum rotational speed of 3000 rpm, a maximum speed of 0.5 m/s, and a repetition accuracy of ±0.02 mm. It complies with VDMA24364 Zone III LABS conformity, meets ISO 14644-1 Class 8 cleanroom standards, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values, excluding certain metals by mass while permitting nickel in steel and chemically nickel-plated surfaces. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8141665 is an adapter for a rotary actuator featuring a structural design and a VDI/VDE 3847-2 compliant valve connection. Operating within an operating pressure range of 0 MPa to 0.9 MPa (0 bar to 9 bar), this component functions with compressed air conforming to ISO 8573-1:2010 [7:7:-] or inert gases across a medium and ambient temperature range of -40 °C to 80 °C. The unit weighs 3140 g, possesses a corrosion resistance class (CRC) of 3 for high corrosion stress, and includes ATEX certification for zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8143163 is an industrial component featuring a screwed-on mounting plate and IP20 degree of protection, with a product weight of 1300 g and green/yellow/red LED status display. It operates within ambient temperatures from 0 °C to 50 °C and storage temperatures between -25 °C and 55 °C, requiring power derating for ambient conditions above 40 °C or installation heights exceeding 1000 m. Certified by TÜV, c UL us - Listed (OL), and RCM compliance mark, this unit conforms to EN 61800-3, EN 61800-5-1, EN 61800-5-2, and EN ISO 13849-1 standards while carrying CE markings per EU EMC, machinery, and RoHS directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8134897 is a piezoresistive pressure sensor designed to measure relative pressure in a measuring range from 0 to 1 MPa, 0 to 10 bar, or 0 to 145 psi with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases within a medium and ambient temperature range of 0 °C to 50 °C, featuring a max overload pressure of 15 bar and 2 x PNP or 2 x NPN switchable switching outputs with window comparator, threshold value comparator, and auto difference monitoring functions. This component carries RCM compliance, c UL us - Listed (OL) certification via UL E322346, CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8141664 is a structural adapter for rotary actuators featuring a VDI/VDE 3847-2 valve connection and a product weight of 2225 g. Designed for any mounting position using accessories, this component operates with compressed air or inert gases across an operating pressure range of 0 MPa to 0.9 MPa and a temperature span of -40 °C to 80 °C. It provides ATEX explosion protection for zones 1, 2, 21, and 22, alongside a CRC 3 high corrosion stress rating and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a quote for this Festo industrial component.
View product details →
Festo
The Festo 8124453 is an electromechanical linear axis with a ball screw, featuring a 400 mm working stroke, a size 120 profile, and an integrated recirculating ball bearing guide. This component operates with a 16 mm screw diameter, a 10 mm/U spindle pitch, 150 µm reversing backlash, a maximum speed of 0.5 m/s, and a repetition accuracy of ±0.02 mm across a 100% duty cycle. It accommodates stepper or servo motors up to a max rotational speed of 3000 rpm and acceleration of 15 m/s², with VDMA24364 Zone III LABS conformity and ISO 14644-1 Class 8 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8142936 is a double-acting industrial component featuring a 63 mm piston diameter and a 50 mm stroke, operating via compressed air within a pressure range of 0.4 bar to 10 bar. It includes elastic cushioning rings at both ends, position sensing via proximity switch, and a single-ended external thread piston rod that delivers a theoretical advancing force of 1870 N at 6 bar. Certified for cleanroom ISO Class 5 and designated suitable for lithium-ion battery production with reduced Cu/Zn/Ni values, this unit operates across an ambient temperature range of 0 °C to 80 °C in any mounting position. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8141663 industrial component features a structural design without throttling and a switchable flow direction, supporting an operating pressure range of 0 MPa to 0.8 MPa and 0 bar to 8 bar with compressed air or inert gases in any mounting position. Constructed with smooth-anodized wrought aluminum alloy covers and housing, high-alloy stainless steel screws, and EPDM and NBR seals, this 645 g part provides a corrosion resistance class of 3 for high corrosion stress and VDMA24364 Zone III LABS conformity while operating within a medium and ambient temperature range of -40 °C to 80 °C across ATEX Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →