Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8120902 is a Series P industrial component featuring a size 44 structural design as a filter regulator without a pressure gauge, incorporating a 40 µm filtration grade, a manual rotating condensate drain with a 12 cm³ max condensate volume, and a regulating screw with locknut actuator lock. Conforming to NACE MR0175/ISO 15156 standards for its housing and bowl with VDMA24364 Zone III LABS conformity, this unit operates across 1 bar to 20 bar with a 0.5 bar to 12 bar regulation range, providing a 2500 l/min max standard flow rate and a 1750 l/min normal nominal flow rate for compressed air or inert gases. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention and protection, it includes primary pressure compensation and secondary exhausting, G1/4 pressure gauge setup, and a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8118874 is a double-acting industrial component featuring a 25 mm piston diameter, an 80 mm stroke, and a yoke drive unit operating mode with an elastic cushioning ring or pad at both ends. It operates with compressed air per ISO 8573-1:2010 [7:4:4] at pressures from 0.15 MPa to 1 MPa (1.5 bar to 10 bar), achieves a maximum speed of 0.8 m/s, and includes recirculating ball bearing guidance with a payload center of gravity distance xs of 50 mm. Built with VDMA24364-B1/B2-L LABS conformity, ISO 14644-1 Class 6 cleanroom suitability, and reduced Cu/Zn/Ni values for Li-ion battery production compatibility, this unit supports any mounting position and position sensing via proximity switch within an ambient temperature range of -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8126915 is an industrial component featuring a 7-inch backlit LCD touchscreen display with a WSVGA resolution of 600x1024 pixels. Control elements comprise 20 function keys, a touch-sensitive keyboard, an enable control unit, and an emergency stop button, alongside 5 system LEDs. It operates on a DC voltage range of 19.2 V to 30 V with an input current of 5.6 A or less, and carries IP65 protection in the mounted state with the USB cover flap closed. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8116845 is a pneumatic parallel industrial component featuring two gripper jaws with a size of 20 and a stroke of 9 mm per jaw. This single-acting closed unit operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar or 36.25 psi to 116 psi) utilizing a ball guide mechanism with a repetition accuracy of 0.02 mm and a gripping force backup during closing. Position sensing is achieved via a proximity switch, supporting a maximum operating frequency of 3 Hz with a minimum opening time of 176 ms and a minimum closing time of 50 ms at 6 bar. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8120901 is a Series P size 44 filter regulator without a pressure gauge, featuring a regulating screw with locknut, primary pressure compensation, and secondary exhausting. Designed for a 0.5 bar to 12 bar pressure regulation range and a maximum standard flow rate of 2400 l/min, this component includes a manual rotating condensate drain and conforms to NACE MR0175/ISO 15156 standards for its housing and bowl. It operates within an ATEX Zone 1, 2, 21, and 22 environment using compressed air or inert gases, and requires a 5 µm filtration grade with a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8118873 is a double-acting industrial guide drive unit featuring a 25 mm piston diameter, a 50 mm stroke, and a yoke operating mode with an xs distance of 50 mm from the payload center of gravity to the yoke plate. Designed with a recirculating ball bearing guide, elastic cushioning rings or pads at both ends, and proximity switch position sensing, it operates within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) at a maximum speed of 0.8 m/s. This component utilizes compressed air according to ISO 8573-1:2010 [7:4:4] as an operating medium, allows optional oil lubrication, achieves ISO 14644-1 Cleanroom Class 6 suitability, and is compliant with VDMA24364-B1/B2-L LABS conformity for Li-ion battery production under reduced Cu/Zn/Ni conditions. Submit part number 8118873, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8126793 is a 10 mm electrical 3/2-way closed monostable industrial component featuring a poppet valve structural design with a mechanical spring reset and soft sealing principle. It operates at 24V DC with an operating and pilot pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), utilizing an M7 pneumatic working port, external pilot air supply port, and non-reversible flow direction with negative overlap. Featuring IP65 protection in the mounted state as per IEC 60529, this piloted valve includes both detenting and non-detenting manual override, a signal status display, and supports any mounting position without vacuum suitability. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8116844 is a pneumatic industrial component featuring two parallel gripper jaws with a size of 20 and a stroke of 9 mm per jaw. This single-acting, closed-mode device utilizes a ball guide and a lever structural design with a lateral connection direction, delivering a repetition accuracy of 0.02 mm and operating within a pressure range of 2.5 bar to 8 bar. Position sensing is achieved via a proximity switch, supporting a maximum operating frequency of 3 Hz alongside a gripping force backup during closing. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo Series P industrial component, part number 8120900, is a size 44 filter regulator without a pressure gauge, featuring a structural design with housing and bowl conforming to NACE MR0175/ISO 15156 standards. This unit operates within a pressure range of 1 bar to 20 bar and a regulation range of 0.5 bar to 12 bar, delivering a max standard flow rate of 2500 l/min alongside a normal nominal flow rate of 1750 l/min. It is equipped with a 40 µm filtration grade, a manual rotating condensate drain with a 12 cm³ max volume, and primary pressure compensation with secondary exhausting for compressed air or inert gas media across ATEX zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8126792 is a 3/2-way closed, monostable electrical industrial component featuring a 10 mm valve size and M7 pneumatic working ports. Engineered with a poppet valve structural design, soft sealing principle, and mechanical spring reset method, this piloted unit operates at 24V DC within an operating pressure range of 3 bar to 8 bar. It includes internal pilot air supply, a signal status display, both detenting and non-detenting manual override, and IP65 protection in the mounted state as per IEC 60529. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a 25 mm piston diameter and a 40 mm stroke, this Festo industrial component utilizes a yoke drive unit operating mode with elastic cushioning rings or pads at both ends and a recirculating ball bearing guide. The double-acting unit functions within an operating pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) and supports a maximum speed of 0.8 m/s using compressed air as per ISO 8573-1:2010 [7:4:4]. It features position sensing via a proximity switch, an ambient temperature range of -5 °C to 60 °C, and a center of gravity distance of the payload to the yoke plate xs of 50 mm. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116843 is a pneumatic industrial component featuring two parallel gripper jaws with a size of 20 and a stroke per jaw of 9 mm. This single-acting, open-mode lever gripper operates at pressures ranging from 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi) with a ball guide, zero angular play, and a repetition accuracy of 0.02 mm. It supports position sensing via proximity switch, flat mounting for gripper fingers, lateral connection direction, and a gripping force backup on opening. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8120899 is a size 44 Series P filter regulator featuring a structural design without a pressure gauge and an actuator lock consisting of a regulating screw with a locknut. It provides a pressure regulation range of 0.5 bar to 12 bar within an operating pressure of 1 bar to 20 bar, supporting a maximum standard flow rate of 2020 l/min and a normal nominal flow rate of 1750 l/min. Conforming to NACE MR0175/ISO 15156 for its housing and bowl, this component includes a 40 µm filtration grade, a manual rotating condensate drain with a 13 cm³ max condensate volume, and ATEX certification for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8126791 is an electrical 3/2-way closed monostable industrial component featuring a 10 mm valve size, M7 pneumatic working ports, and a soft sealing principle with a negative overlap lap. Engineered with a poppet valve structural design, mechanical spring reset, and external pilot air supply port, this 24V DC unit operates between 3 bar and 8 bar (0.3 MPa to 0.8 MPa) with IP65 protection in the mounted state and includes a signal status display and both detenting and non-detenting manual override. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 8118871 is a double-acting industrial component featuring a 25 mm piston diameter, a 30 mm stroke, and a yoke drive unit operating mode with an elastic cushioning ring or pad at both ends. Guided by a recirculating ball bearing, this guide structural design operates on compressed air within an operating pressure range of 0.15 MPa to 1 MPa and achieves a maximum speed of 0.8 m/s. It includes position sensing via a proximity switch, supports any mounting position, and maintains a distance of the center of gravity of the payload to the yoke plate xs of 50 mm. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8116842 is a size 20 pneumatic parallel gripper featuring two jaws with a stroke of 9 mm per jaw and a ball guide. It operates in a single-acting, open mode with a gripping force backup on opening, supporting an operating pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi). This component achieves a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, and position sensing via a proximity switch, with a maximum operating frequency of 3 Hz. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 8120898 is a size 44 Series P filter regulator featuring a structural design without a pressure gauge, a regulating screw with locknut actuator lock, and a manual rotating condensate drain with a 13 cm³ max volume. It operates across an input pressure range of 1 bar to 20 bar with a 0.5 bar to 12 bar regulation range, delivering a max standard flow rate of 2020 l/min using compressed air per ISO 8573-1:2010 [-:4:-] or inert gases. Certified for ATEX Zones 1, 2, 21, and 22, the housing and bowl conform to NACE MR0175/ISO 15156 standards while supporting vertical ±5° mounting and 40 µm filtration. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8126790 is a 10 mm electrical industrial component featuring a 3/2-way closed, monostable poppet valve design with a mechanical spring reset and soft sealing principle. Operating at 24V DC with an internal pilot air supply port, this piloted unit functions across an operating and pilot pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar) with a non-reversible flow direction and negative overlap. It provides IP65 protection in the mounted state as per IEC 60529, includes a signal status display, features detenting and non-detenting manual override, and supports any mounting position without vacuum suitability. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 8118870 is a double-acting industrial guide drive unit featuring a 25 mm piston diameter, a 25 mm stroke, and a recirculating ball bearing guide. Operating with compressed air as per ISO 8573-1:2010 [7:4:4] within a pressure range of 0.15 MPa to 1 MPa, this component achieves a maximum speed of 0.8 m/s and incorporates elastic cushioning rings or pads at both ends. Designed with a yoke drive operating mode and a 50 mm distance from the centre of gravity of the payload to the yoke plate xs, the unit offers position sensing via proximity switch and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) and ISO Class 6 cleanrooms. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116841 is a pneumatic industrial component featuring a size 20 parallel gripper with two jaws and a stroke of 9 mm per jaw. This single-acting, open-mode pneumatic gripper utilizes a ball guide with zero angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and an operating frequency up to 3 Hz within a pressure range of 2.5 bar to 8 bar. Position sensing is enabled via proximity switch, supporting any mounting position with a gripping force backup on opening. Submit the exact part number, quantity, and application requirements for a quote.
View product details →