Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8114752 is an industrial component utilizing a piezoresistive pressure sensor to measure relative pressure across a range of 0 to -0.1 MPa (0 to -1 bar, 0 to -14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It features a switchable PNP/NPN switching output supporting window comparator and threshold value comparator functions with N/C or N/O contact options, operating within a medium and ambient temperature range of 0 °C to 50 °C using compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases. The unit carries RCM, c UL us - Listed (OL), CE, and UKCA markings in accordance with relevant EMC and RoHS directives while maintaining RoHS material compliance. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8113010 is an L-shaped industrial component featuring an 8 mm nominal width, a G3/8 internal thread pneumatic connection 1, and a pneumatic connection 2 for a 10 mm outside diameter tubing utilizing a push-pull structural design. Constructed with a nickel-plated brass and PBT housing alongside a blue releasing ring, this standard-sized unit operates across a pressure range of -0.95 bar to 8 bar and supports lubricated compressed air per ISO 8573-1:2010 [7:4:4] within an ambient temperature of -5 °C to 60 °C. Each pack contains 5 units, featuring an external hexagon SW21 mounting type that supports any mounting position, a CRC 1 corrosion resistance class, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8118823, is a double-acting guide drive unit featuring a 16 mm piston diameter, a 20 mm stroke, and a yoke operating mode with a 50 mm centre of gravity distance from the yoke plate to the payload. Engineered with a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, the unit operates on compressed air within a 0.2 MPa to 1 MPa range at speeds up to 0.8 m/s. It meets ISO 14644-1 Cleanroom Class 6 standards and VDMA24364-B1/B2-L LABS conformity with reduced Cu/Zn/Ni values for Li-ion battery production suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8116802 is a pneumatic industrial component featuring two parallel gripper jaws with a 3 mm stroke per jaw and a size 16 rating. This single-acting, closed-mode device incorporates a ball guide and lever structural design with a positively driven motion sequence, a gripper force backup during closing, and position sensing capability for proximity sensors. It operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi) supporting a maximum operating frequency of 3 Hz, with a 30 ms minimum opening time and 65 ms minimum closing time at 6 bar. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8114751 is an industrial component utilizing a piezoresistive pressure sensor to measure relative pressure within a range of -0.1 to 0.1 MPa (-1 to 1 bar, or -14.5 to 14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It operates with compressed air conforming to ISO 8573-1:2010 [7:4:4] or inert gases across a medium and ambient temperature range of 0 °C to 50 °C, featuring a switchable PNP/NPN switching output with window comparator and threshold value comparator functions. The unit carries RCM compliance, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking per UK instructions for EMC and RoHS, with RoHS compliance on materials. Submit your exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8113009 is an L-shaped industrial component featuring a nominal width of 6 mm, a G3/8 internal thread pneumatic connection 1, and a pneumatic connection 2 for an 8 mm outside diameter tubing utilizing the push-pull principle. Built with a nickel-plated brass and PBT housing, this standard-sized component operates within a pressure range of -0.95 bar to 8 bar and temperatures from -5 °C to 60 °C using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Each pack contains 5 units, featuring an external hexagon SW21 mounting type that supports any mounting position, a blue releasing ring, a product weight of 36.2 g, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8116801 is a pneumatic industrial component featuring two parallel gripper jaws with a size 16 and a 3 mm stroke per jaw. It utilizes a single-acting, closed mode of operation with a ball guide, offering a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and an operating pressure range of 0.25 MPa to 0.8 MPa. This unit supports proximity sensor position sensing and incorporates a gripping force backup during closing, along with a maximum interchangeability of 0.2 mm and zero angular play or backlash. Submit the exact part number, quantity, and application requirements for a formal price quotation.
View product details →
Festo
The Festo part number 8118822 is a double-acting industrial component featuring a 16 mm piston diameter and a 10 mm stroke driven by a yoke operating mode. This guide structural design incorporates a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch. It operates within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s, using compressed air as per ISO 8573-1:2010 [7:4:4] with ambient temperatures from -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8114750 is an industrial component featuring a piezoresistive pressure sensor for measuring relative pressure from -0.1 to 1 MPa (-1 to 10 bar). It operates with compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases within a medium and ambient temperature range of 0 °C to 50 °C, supporting a maximum overload pressure of 15 bar. The unit includes a switchable PNP/NPN switching output with window comparator and threshold value comparator functions, delivering an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. This component carries RCM and c UL us - Listed (OL) certifications alongside CE and UKCA markings compliant with relevant EMC and RoHS directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8113008 is a standard L-shape industrial component featuring an 8.5 mm nominal width, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for 10 mm outside diameter tubing utilizing a push-pull principle with a blue releasing ring. Constructed with a nickel-plated brass and PBT housing, this unit operates with compressed air according to ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C. Each pack contains 10 units with a product weight of 33.76 g each, an external hexagon SW17 mounting type, and any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8116800 is a pneumatic parallel gripper featuring two jaws with a size of 16, a stroke of 3 mm per jaw, and single-acting closed operation with gripping force backup during closing. This industrial component utilizes a ball guide with 0 mm jaw backlash, 0 deg angular play, 0.2 mm maximum interchangeability, 0.2 mm rotational symmetry, and a repetition accuracy of 0.02 mm, operating within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi). Designed with positive motion and position sensing for proximity sensors, the unit achieves a maximum operating frequency of 3 Hz with minimum opening and closing times of 30 ms and 65 ms respectively at 6 bar in any mounting position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8118638 is a double-acting industrial drive unit featuring a yoke structural design, a 12 mm piston diameter, and a 100 mm stroke. It operates with compressed air according to ISO 8573-1:2010 [7:4:4] at pressures between 0.2 MPa and 1 MPa, utilizing elastic cushioning rings or pads at both ends and recirculating ball bearing guides. This component achieves a maximum speed of 0.8 m/s, accommodates any mounting position, provides position sensing via proximity switch, and meets ISO 14644-1 cleanroom class 6 standards with VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113007 is a standard L-shaped industrial component featuring a nominal width of 6 mm, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for an 8 mm outside diameter tubing. Built with a nickel-plated brass and PBT housing with an external hexagon SW17 mounting type, this push-pull design operates within a pressure range of -0.95 bar to 8 bar and temperatures from -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Each pack size contains 10 units weighing 25.7 g each, featuring a blue releasing ring and compliance with RoHS and LABS VDMA24364 Zone III standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo 32 mm electrical industrial component features a 5/3 exhausted valve function with a piston gate valve structural design and a mechanical spring reset method. It provides a normal nominal flow rate of 1050 l/min, a C value of 4.4 l/sbar, a b-value of 0.4, and an operating pressure range of 0.3 MPa to 0.8 MPa utilizing an internal pilot air supply port. Designed with a NAMUR connection pattern conforming to standard VDI/VDE 3845, it includes adjustable exhaust air function, soft sealing, and positive overlap lap, operating via a separately ordered solenoid coil. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116799 is a pneumatic industrial component featuring a size 16 parallel gripper function with two single-acting, closed gripper jaws and a stroke of 3 mm per jaw. Built with a ball guide and lever structural design providing a positively driven motion sequence, it delivers a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, and gripping force backup during closing. The unit operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar or 36.25 psi to 116 psi), achieves a maximum operating frequency of 3 Hz, and supports position sensing via proximity switch in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8118637 is a double-acting industrial component featuring a yoke drive unit with an 80 mm stroke and a 12 mm piston diameter. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] at pressures between 2 bar and 10 bar, this guide structural design incorporates a recirculating ball bearing, elastic cushioning rings at both ends, and position sensing via proximity switch. It achieves a maximum speed of 0.8 m/s, features an ambient temperature range of -5 °C to 60 °C, and meets ISO 14644-1 cleanroom Class 6 along with VDMA24364-B1/B2-L LABS conformity with reduced copper, zinc, and nickel values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113006 is an L-shaped industrial component featuring a nominal width of 4.5 mm, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing. This standard-sized unit utilizes a push-pull structural design with a nickel-plated brass and PBT housing, an external hexagon SW17 mounting type, and a blue releasing ring. It operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8114701 is a 32 mm wide electrical-actuated industrial component featuring a 5/3-way pressurized valve function and a piston gate valve structural design with a mechanical spring reset. Operating at a pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), this piloted unit utilizes an internal pilot air supply port, a NAMUR connection pattern pneumatic working port conforming to VDI/VDE 3845 standards, and a soft sealing principle with adjustable exhaust air. It delivers a normal nominal flow rate of 950 l/min, featuring non-reversible flow direction, positive overlap lap, a b-value of 0.5, and a C value of 2.1 l/sbar, with operating voltage applied via a separately ordered solenoid coil in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8116798 is a pneumatic industrial component featuring a size 16 parallel gripper function with two single-acting, closed gripper jaws that provide a 3 mm stroke per jaw. This unit incorporates a ball guide with zero degrees of angular play, zero millimeter backlash, 0.2 mm maximum interchangeability, and a repetition accuracy of 0.02 mm, operating within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar or 36.25 psi to 116 psi). Position sensing is accomplished via proximity switch, supporting a maximum operating frequency of 3 Hz with a minimum opening time of 30 ms and closing time of 65 ms at 6 bar. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8113005 is a standard L-shape industrial component featuring an 8 mm nominal width and a push-pull structural design with an external hexagon SW17 mounting type. This nickel-plated brass and PBT housing accommodates an internal thread G1/8 for pneumatic connection 1 and a 10 mm outside diameter pneumatic tubing for connection 2, operating within a pressure range of -0.095 MPa to 0.8 MPa. Designed with a blue releasing ring, the unit supports compressed air per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C in any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →