Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
This Festo industrial component (part number 8116836) is a double-acting pneumatic parallel gripper featuring two gripper jaws, a ball guide, and a 9 mm stroke per jaw operating within a pressure range of 1 bar to 8 bar. The unit achieves a repetition accuracy of 0.02 mm, a maximum interchangeability and rotational symmetry of 0.2 mm, zero angular play and backlash, and a maximum operating frequency of 3 Hz with a minimum opening time of 110 ms at 6 bar. Position sensing is accomplished via proximity switch, utilizing a structural design with lateral connection direction, lever action, side mounting for gripper fingers, and positively driven motion sequence in any mounting position while excluding specific metals by mass. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8119993 is a single-acting industrial component featuring a size 2 design, a 4 mm stroke, and a self-adjusting cushioning system with a 4 mm cushioning length. It operates in any mounting position with a pushing mode, delivering a maximum stop force of 60 N, a maximum impact velocity of 0.5 m/s, and a maximum energy absorption of 0.1 J per stroke. Rated for a corrosion resistance class of 2 and suitable for Li-ion battery production with reduced Cu/Zn/Ni values, this unit functions within an ambient temperature range of -10 °C to 70 °C. Submit the exact part number, required quantity, and application parameters to request a quote.
View product details →
Festo
The Festo 8118864 is a double-acting industrial drive unit featuring a yoke structural design, a 25 mm piston diameter, and a 30 mm stroke. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a 0.15 MPa to 1 MPa pressure range, it incorporates a plain-bearing guide, elastic cushioning rings at both ends, and proximity switch position sensing. This component achieves a maximum speed of 0.8 m/s, features a center of gravity distance of 50 mm to the yoke plate xs, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements for an immediate quote.
View product details →
Festo
Engineered by Festo, part number 8119984 is a single-acting industrial component operating in a pushing mode with a 7 size and a 5 mm stroke. This unit features self-adjusting cushioning with a 5 mm cushioning length, accommodating a maximum impact velocity of 1.5 m/s, a maximum stop force of 300 N, and a maximum energy absorption of 2 J per stroke. It operates within an ambient temperature range of -10 °C to 80 °C, exhibits a corrosion resistance class of 2, and complies with VDMA24364-B2-L LABS conformity for Li-ion battery production suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8116835 is a double-acting pneumatic parallel gripper featuring a size 20 designation, a 9 mm stroke per gripper jaw, and an integrated ball guide with zero angular play and zero backlash. Operating within a pressure range of 1 bar to 8 bar (14.5 psi to 116 psi), this two-jaw lever gripper achieves a repetition accuracy of 0.02 mm and supports position sensing via proximity switch in any mounting position. Copper, zinc, and nickel restrictions apply to its metallic construction variants, which operate at a maximum frequency of 3 Hz with a minimum opening time of 110 ms at 6 bar. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8118863 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 25 mm stroke, and a yoke drive mode with a 50 mm distance from the payload centre of gravity to the yoke plate. Designed with elastic cushioning rings or pads at both ends and a plain-bearing guide, this component operates within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) at a maximum speed of 0.8 m/s using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers position sensing via proximity switch, allows any mounting position, meets ISO 14644-1 Cleanroom Class 6, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8114986 is a standard straight industrial component featuring a 3 mm nominal width, a 15.9 mm tubing insertion depth, and a sealing ring on the screwed plug. Utilizing a push-pull structural design with any mounting position, this component operates across a pressure range of -0.095 MPa to 2 MPa and an ambient temperature range of 0 °C to 150 °C. It supports compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water, achieves a corrosion resistance class of 3, and is supplied in a pack size of 10 with a nominal tightening torque of 3 Nm at a tolerance of ±20%. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
This Festo industrial component, part number 8119983, is a single-acting pushing device featuring a size 5 format and a 5 mm stroke with a 5 mm cushioning length. It provides self-adjusting cushioning with a maximum impact velocity of 1 m/s, a maximum stop force of 200 N, and a maximum energy absorption per stroke of 1.4 J. The unit operates within an ambient temperature range of -10 °C to 80 °C, exhibits a corrosion resistance class of CRC 2 for moderate corrosion stress, and complies with VDMA24364-B2-L LABS conformity with reduced Cu/Zn/Ni values suitable for Li-ion battery production. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8116834 is a pneumatic industrial component featuring a size 20 parallel gripper with two jaws and a single-acting, closed mode of operation. This unit utilizes a ball guide and lever structural design with connection via mounting spigot and flat mounting for gripper fingers, delivering a stroke of 5 mm per jaw alongside a repetition accuracy of 0.02 mm and gripping force backup during closing. It operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi) with a maximum operating frequency of 3 Hz, supporting any mounting position and position sensing via proximity sensor. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118862 is a double-acting industrial drive unit featuring a yoke structural design, a 25 mm piston diameter, and a 20 mm stroke with a plain-bearing guide. It operates on compressed air within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) and achieves a maximum speed of 0.8 m/s utilizing elastic cushioning rings or pads at both ends. Designed with a center of gravity distance of the payload to the yoke plate xs of 50 mm, this component incorporates position sensing via a proximity switch and functions across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
This straight Festo industrial component, part number 8114985, features a standard size with a 6 mm nominal width and an 18.3 mm tubing insertion depth using a push-pull structural design and a sealing ring on the screwed plug. The unit operates in any mounting position across a temperature range of 0 °C to 150 °C with an operating pressure from -0.095 MPa to 2 MPa for compressed air and water up to 0.6 MPa at 0 to 50 °C. It holds a corrosion resistance class of 3 for high corrosion stress, NSF C0523185 and NSF/ANSI 169 certifications, ISO 14644-1 Class 4 cleanroom suitability, and VDMA24364-B1/B2-L LABS conformity, requiring a nominal tightening torque of 6 Nm with a ±20% tolerance in a pack size of 10. Submit part number 8114985, required quantity, and application specifications to request a formal quote.
View product details →
Festo
This Festo industrial component, part number 8119982, is a single-acting, pushing-mode device featuring a size 4 designation and a 4 mm stroke. It incorporates self-adjusting cushioning with a 4 mm cushioning length, supporting a maximum impact velocity of 1 m/s, a maximum stop force of 100 N, and a maximum energy absorption of 0.8 J per stroke. The unit operates within an ambient temperature range of -10 °C to 80 °C, exhibits a corrosion resistance class of 2 for moderate stress, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 8116833 is a pneumatic industrial component featuring two parallel gripper jaws with a size of 20 and a stroke of 5 mm per jaw. This single-acting, closed-mode pneumatic gripper utilizes a ball guide and a positively driven motion sequence, offering a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, and a gripping force backup during closing. It operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi) at a maximum operating frequency of 3 Hz, with position sensing for a proximity sensor and any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 8118856 is a double-acting industrial drive unit featuring a 20 mm piston diameter, a 100 mm stroke, and a yoke drive operating mode with a recirculating ball bearing guide. It operates with compressed air within a 2 bar to 10 bar pressure range, achieving a maximum speed of 0.8 m/s with elastic cushioning rings at both ends and integrated position sensing via proximity switch. This unit has a VDMA24364-B1/B2-L LABS conformity, is suitable for battery production with reduced Cu/Zn/Ni values, and meets ISO 14644-1 cleanroom Class 6 standards for ambient temperatures from -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a formal quotation.
View product details →
Festo
The Festo 8114779 industrial component is a piezoresistive pressure sensor engineered to measure relative pressure within a measuring range from 0 to -0.1 MPa (0 to -1 bar, or 0 to -14.5 psi) utilizing compressed air or inert gases. This device features a switchable PNP/NPN switching output supporting window comparator and threshold value comparator functions with switchable N/C or N/O contact elements, operating across a medium and ambient temperature range of 0 °C to 50 °C with an accuracy of 1.5 %FS. Certified with the RCM compliance mark and c UL us - Listed (OL) approval, the unit complies with EU and UK directives for EMC and RoHS. Please submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo size 3 industrial component features a 4 mm stroke, a 4 mm cushioning length, and self-adjusting cushioning with a maximum impact velocity of 1 m/s. This single-acting pushing device operates in any mounting position within an ambient temperature range of -10 °C to 80 °C, delivering a maximum stop force of 80 N and absorbing up to 0.4 J of energy per stroke. Constructed with a corrosion resistance class of 2 and VDMA24364-B2-L LABS conformity, it restricts specific metal constituents and meets criteria for battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements for a quote on this component.
View product details →
Festo
The Festo part number 8116832 is a pneumatic industrial component featuring a size 20 parallel gripper with two jaws and a stroke of 5 mm per jaw. This single-acting, closed pneumatic gripper operates at pressures from 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar) and includes a gripping force backup during closing. The unit utilizes a ball guide with zero gripper jaw angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and a max operating frequency of 3 Hz. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8118855 is a double-acting industrial component featuring a yoke drive unit with an 80 mm stroke, a 20 mm piston diameter, and an elastic cushioning system at both ends. Guided by a recirculating ball bearing, this unit operates at pressures from 0.2 MPa to 1 MPa (2 bar to 10 bar) with a maximum speed of 0.8 m/s, utilizing compressed air as per ISO 8573-1:2010 [7:4:4] and supporting optional oil lubrication. The assembly incorporates position sensing via proximity switch, features a distance of centre of gravity of payload to yoke plate xs of 50 mm, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) alongside ISO 14644-1 cleanroom Class 6 compliance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8114778 is a piezoresistive pressure sensor designed to measure relative pressure across a range of -0.1 to 0.1 MPa (-1 to 1 bar, -14.5 to 14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It features a switchable PNP/NPN output supporting window and threshold value comparators with configurable N/C or N/O contact functions. Operating within a medium and ambient temperature range of 0 °C to 50 °C, the unit accommodates compressed air meeting ISO 8573-1:2010 [7:4:4] or inert gases, allowing for lubricated operation up to a 5 bar max overload pressure. This component carries c UL us - Listed (OL) and RCM compliance marks, alongside CE and UKCA markings per applicable EMC and RoHS directives. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
This Festo industrial component, part number 8119980, is a single-acting pushing device featuring a size 2 design, a 4 mm stroke, and self-adjusting cushioning. It operates across an ambient temperature range of -10 °C to 70 °C in any mounting position with no position sensing and offers a maximum stop force of 60 N alongside a maximum energy absorption of 0.1 J per stroke. Rated with a corrosion resistance class of 2 for moderate stress and VDMA24364-B2-L LABS conformity, the unit is suitable for battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →