Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8111583 is an externally controlled 2/2 poppet valve with a piston actuator designed for in-line installation in any mounting position. It features a non-reversible flow direction above the valve seat, a G1/2 threaded sleeve cable connection, and a G1/8 internal thread pneumatic connection, supporting media pressures from 0 bar to 16 bar and operating pressures from 5 bar to 7 bar. Operating with vapor, inert gas, or filtered compressed air up to 600 mm²/s viscosity, this unit utilizes a mechanical spring reset and handles medium temperatures between -10 °C and 60 °C in weather-protected exterior locations. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8113104 is a mini straight industrial component featuring a 2.3 mm nominal width and a push-pull structural design for 4 mm to 3 mm outside diameter pneumatic tubing. Supplied in a pack size of 10, this PBT-housed unit with a blue POM releasing ring operates across a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It weighs 1.8 g, provides ISO 14644-1 Class 4 cleanroom suitability, VDMA24364 Zone III LABS conformity, and CRC 1 low corrosion stress resistance while supporting lubricated operation and RoHS compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo electrical industrial component features a 100% duty cycle, Class H insulation, and coil characteristics of 60 V AC at 40/65 Hz with 1.8 VA power and 60 V DC at 1.8 W with permissible voltage fluctuations of -15% / +10%. The unit supports any mounting position, provides an IP65 degree of protection, adheres to VDMA24364 Zone III LABS conformity, and includes CE and UKCA markings alongside comprehensive ATEX, IEC-EX, and UK EX explosion protection certifications for Zone 1, Zone 2, Zone 21, and Zone 22 hazardous environments. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8103461 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 50 mm stroke, and a plain-bearing guide with two yokes. It operates within a pressure range of 0.12 MPa to 0.8 MPa utilizing compressed air conforming to ISO 8573-1:2010 [7:4:4], delivering a theoretical retracting force of 454 N at 6 bar. This component incorporates elastic cushioning rings at both ends with an end position impact energy of 0.3 Nm, an adjustable end position range of 10 mm, and position sensing via proximity switch. Rated for ambient temperatures from -10 °C to 80 °C, it meets ISO 14644-1 Class 5 cleanroom suitability and features a CRC 1 corrosion resistance class. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8111391 is a single-acting industrial component featuring a size 4 design with a 4 mm stroke and self-adjusting cushioning. Operating in a pushing mode with any mounting position, this part handles a maximum impact velocity of 1 m/s, a max stop force of 100 N, and a max energy absorption of 0.8 J per stroke. It is rated for a corrosion resistance class of 2 and an ambient temperature range of -10 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8113103 is a mini industrial component featuring a straight design with a 2.2 mm nominal width and a push-pull structural design for 3 mm outside diameter pneumatic tubing on both connections. Constructed with a PBT housing and a blue POM releasing ring, this pack of 10 components supports an operating pressure range of -0.095 MPa to 0.8 MPa across an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Each 1.03 g RoHS-compliant unit offers a corrosion resistance class of 1, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and permits lubricated operation in any mounting position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8109399 is an electrical industrial component featuring Class H insulation, internal fuse protection, and a 100% duty cycle with a universal mounting position. Operating on 24 V DC at 1.8 W or 24 V AC at 40/65 Hz and 1.8 VA, this unit accommodates permissible voltage fluctuations of -15% / +10% while achieving an IP65 degree of protection and VDMA24364 Zone III LABS conformity. Certified under IECEx BVS 15.0075X and TÜV 21 UKEX 7015 X, it carries CE and UKCA markings compliant with ATEX, IEC-EX, UK EX, and RoHS directives for use in gas Zone 1 and Zone 2 (ATEX category II 2G, Ex eb mb IIC T* Gb) as well as dust Zone 21 and Zone 22 (ATEX category II 2D, Ex tb IIIC T*°C Db) across explosive ambient temperatures ranging from -30°C to +60°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8103460 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 40 mm stroke, two yokes, and a plain-bearing guide operating within a pressure range of 0.12 MPa to 0.8 MPa (1.2 bar to 8 bar). This component incorporates elastic cushioning rings at both ends with an end-position impact energy of 0.3 Nm, an adjustable end position range of 10 mm, position sensing via proximity switch, and a theoretical retracting force of 454 N at 6 bar. Designed for any mounting position using compressed air as per ISO 8573-1:2010 [7:4:4], it achieves ISO 14644-1 Class 5 cleanroom suitability, VDMA24364 Zone III LABS conformity, and Class 1 corrosion resistance while functioning across ambient temperatures from -10 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo VPWP-10-L-5-Q-10-E-G-EX1 (1552544) is a proportional directional valve featuring GTIN 4052568239350. Submit the exact part number, quantity, and application requirements to receive an official quote for this industrial component.
View product details →
Festo
The Festo size 3 industrial component features a 4 mm stroke and a single-acting pushing mode of operation with self-adjusting cushioning. This unit delivers a maximum stop force of 80 N, a maximum energy absorption of 0.4 J per stroke, and operates within an ambient temperature range of -10 °C to 80 °C in any mounting position. Built with a moderate corrosion resistance class (CRC 2) and VDMA24364-B2-L LABS conformity, the device handles a maximum impact velocity of 1 m/s and a maximum energy absorption of 4500 J per hour. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 8113102 is a standard-sized L-shape industrial component featuring an R1/2 external thread for pneumatic connection 1 and a connection for a 12 mm outside diameter pneumatic tubing for pneumatic connection 2, alongside an additional internal thread lengthwise. Built with a push-pull structural design, a coated screwed plug seal, and an external hexagon SW24 mounting type, this part operates within a pressure range of -0.095 MPa to 0.8 MPa and handles compressed air according to ISO 8573-1:2010 [7:4:4] with lubricated operation possible. Each pack size contains 5 RoHS-compliant units weighing 92.17 g each, conforming to CRC class 1, VDMA24364 Zone III LABS, and ISO 14644-1 Class 4 cleanroom suitability for ambient temperatures from -5 °C to 60 °C in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8109398 is an electrical industrial component weighing 330 g with a 100% duty cycle, Class H insulation, and any mounting position. It operates on 230 V DC at 1.8 W or 230 V AC at 40/65 Hz with 1.8 VA, featuring permissible voltage fluctuations of -15% / +10% and an IP65 degree of protection. Certified for explosive atmospheres in Zones 1, 2, 21, and 22, it carries ATEX, IEC-EX, UKEX, and CE markings, with ignition protection types including Ex eb mb IIC T* Gb and Ex tb IIIC T*°C Db issued via authorities like IECEx BVS 15.0075X and TÜV 21 UKEX 7015 X. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
Engineered with a 25 mm piston diameter, a 30 mm stroke, and a plain-bearing guide utilizing two yokes, this Festo industrial component operates in a double-acting mode using compressed air within an operating pressure range of 0.12 MPa to 0.8 MPa. The unit features elastic cushioning rings at both ends with an end position range of 10 mm, position sensing via a proximity switch, and achieves a theoretical retracting force of 454 N at 6 bar alongside a maximum payload of 31 N. It functions within an ambient temperature range of -10 °C to 80 °C, exhibits a CRC rating of 1, and meets ISO 14644-1 Class 5 cleanroom suitability. Please submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 8113101 is a standard industrial component featuring an L-shaped design with an additional internal thread lengthwise, an R3/8 external thread for pneumatic connection 1, and a 12 mm outside diameter tubing connection for pneumatic connection 2. Utilizing a push-pull structural design with a blue releasing ring and a coated screwed plug seal, this unit operates across a pressure range of -0.095 MPa to 0.8 MPa and temperatures from -5 °C to 60 °C with compressed air per ISO 8573-1:2010 [7:4:4]. Each pack contains 5 units weighing 59.98 g each, featuring VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8111384 is a single-acting industrial component with a size of 4, a 4 mm stroke, and a pushing mode of operation featuring self-adjusting cushioning over a 4 mm cushioning length. It operates in any mounting position within an ambient temperature range of -10 °C to 80 °C, delivering a maximum stop force of 100 N, a maximum impact velocity of 1 m/s, and a maximum energy absorption of 0.8 J per stroke. Constructed with a corrosion resistance class of 2 and VDMA24364-B2-L LABS conformity, this part requires a minimum insertion force of 4.5 N and features a maximum tightening torque of 1 Nm without position sensing. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8109397 is an electrical industrial component weighing 330 g with any mounting position and a 100% duty cycle. It features Class H insulation, a power rating of 1.8 W at 110 V DC or 1.8 VA at 110 V AC (40/65 Hz), and permissible voltage fluctuations of -15% / +10%. Certified for Zone 1, 2, 21, and 22 hazardous areas with ATEX, IEC-EX, UKEX, CE, and UKCA markings, it achieves an IP65 degree of protection across an explosive ambient temperature range down to -30°C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo LRB-1/4-DB-7-O-K5-MINI (540043) is an industrial pressure regulator co component with GTIN 4052568178345. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8103458 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 20 mm stroke, and a plain-bearing guide with two yokes. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a 1.2 bar to 8 bar pressure range, it delivers a theoretical retracting force of 454 N at 6 bar and includes elastic cushioning rings at both ends. The component operates in ambient temperatures from -10 °C to 80 °C, provides position sensing via proximity switch, and achieves ISO Class 5 cleanroom suitability alongside VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8113100, is a standard L-shape fitting featuring an external thread R3/8 on pneumatic connection 1 and an external hexagon SW21 for mounting, with an additional internal thread lengthwise and a push-pull structural design for 10 mm outside diameter pneumatic tubing. The unit operates within a temperature range of -5 °C to 60 °C and an operating pressure of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4], allowing lubricated operation and featuring a blue releasing ring, a coated screwed plug seal, a nominal width of 6.5 mm, and a product weight of 57.77 g. Built with CRC 1 low corrosion stress, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and RoHS compliance, this component is packaged in a pack size of 5 for installation in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8111383 is a single-acting industrial component featuring a Size 3 design, a 4 mm stroke, and a pushing mode of operation with self-adjusting cushioning over a 4 mm cushioning length. It accommodates any mounting position and operates within an ambient temperature range of -10 °C to 80 °C while handling a max. impact velocity of 1 m/s, max. energy absorption per stroke of 0.4 J, and max. stop force of 80 N. Built with a corrosion resistance class of CRC 2 and VDMA24364-B2-L LABS conformity, this unit provides a max. tightening torque of 1 Nm, min. insertion force of 3.5 N, resetting force of 0.5 N, and a reset time ranging from 0.2 s at room temperature to 1 s at the minimum ambient temperature. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →