Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8107711 industrial component features a nominal length of 17.5 mm, a mass moment of inertia of 0.28 kgmm², and a transferable torque of 1.1 Nm supporting a maximum rotational speed of 10000 rpm. This RoHS compliant unit operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%, while maintaining an IP40 degree of protection and VDMA24364-B2-L LABS conformity. Weighing 71 g with any mounting position allowed, it includes actuator interface code P5-28B, motor-in interface code 40R, and coupling housing interface code 28B. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8110370 is an industrial component measuring 50 mm x 107 mm x 80 mm with an interlinking block and weighing 280 g, featuring a die-cast aluminum housing rated IP65 and IP67 with a corrosion resistance class of CRC 0. Operating via PROFINET IRT and PROFINET RT protocols at a baud rate of 100 Mbit/s, this unit includes dual RJ45 push-pull AIDA fieldbus sockets, DIL switch control elements, and comprehensive LED displays for monitoring bus and product status. It provides a maximum address capacity of 64 bytes for both inputs and outputs, supports channel-oriented and module-oriented diagnostics with a diagnostic memory, and functions within an ambient temperature range of -5 °C to 50 °C. Please submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8102915 is a single-acting gear rack and pinion valve actuator featuring a size 2300 actuator, an F16 flange hole pattern, and a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Operating at a nominal operating pressure of 4.5 bar (0.45 MPa or 65.25 psi) within an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, this safety device utilizes spring force to switch to the defined safety switching position when compressed air is switched off and the spring chamber is exhausted. It is certified for safety functions to ISO 13849 and IEC 61508, supporting safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and up to SIL 3 in a redundant architecture, with a shaft connection depth of 48 mm, any mounting position, right-closing direction, and standardized connections conforming to ISO 5211 and VDI/VDE 3845 for valves, positioners, and position sensors. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8113075 is an L-shaped industrial component with an additional push-in connector in a lengthwise design, featuring a 4 mm nominal width and a standard size. It operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, or -13.775 psi to 116 psi) using compressed air according to ISO 8573-1:2010 [7:4:4], and accommodates lubricated operation. This pack size of 10 utilizes a push-pull structural design, an external hexagon SW14 mounting type, an R1/4 external thread for pneumatic connection 1, and a port for 6 mm outside diameter pneumatic tubing for pneumatic connection 2. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8107710 is an industrial component featuring a nominal length of 17.5 mm, a product weight of 59 g, and a mass moment of inertia of 0.28 kgmm². It accommodates any mounting position, operates at a maximum rotational speed of 10000 rpm, and delivers a transferable torque of 1.1 Nm under an IP40 degree of protection. Materials are RoHS compliant and conform to VDMA24364-B2-L for LABS (PWIS), with specified interface codes P5-28B for the actuator, 38AA for the motor in, and 28B for the coupling housing. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8113074 is a standard-sized industrial component featuring an L-shape design with a lengthwise push-in connector and an external hexagon SW14 mounting type. It incorporates an R1/4 external thread for pneumatic connection 1 and accommodates a 4 mm outside diameter pneumatic tubing at connection 2, utilizing a blue releasing ring with a push-pull structural design and a coated screwed plug seal. Operating within a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C, this part weighs 16.36 g, has a nominal width of 3.4 mm, and supports compressed air media as per ISO 8573-1:2010 [7:4:4] with lubricated operation possible. Submit the exact part number, quantity, and application requirements to request a quote for this pack size of 10.
View product details →
Festo
The Festo industrial component, part number 8110369, features PROFINET IRT and PROFINET RT communication protocols with a 100 Mbit/s baud rate and a 64-byte maximum address capacity for both inputs and outputs. Housed in die-cast aluminum with dimensions of 50 mm x 107 mm x 50 mm including the interlinking block and a weight of 185 g, it provides IP65 and IP67 protection, an ambient operating temperature range of -5 °C to 50 °C, and a corrosion resistance class of CRC 0. The unit includes M12x1 D-coded 2x socket fieldbus interfaces, DIL switch control elements, comprehensive LED status displays for system and bus conditions, and channel-oriented diagnostics with a diagnostic memory. Submit the exact part number, quantity, and application requirements to receive a quote for this Festo component.
View product details →
Festo
The Festo NEBV-M8W4L-E-5-LE2 (part number 562472, GTIN 4052568056766) is an industrial connecting cable manufactured by Festo. This specific component facilitates reliable signal transmission within automated systems. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8102914, is a single-acting gear rack/pinion valve actuator featuring a size 2300 design, an F16 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal angle. Certified for safety functions to ISO 13849 and IEC 61508, the unit operates at pressures ranging from 0.2 MPa to 0.8 MPa (2 bar to 8 bar, or 29 psi to 116 psi) with a nominal operating pressure of 0.35 MPa (3.5 bar, 50.75 psi) and a burst pressure of 24 bar. It incorporates a safety function utilizing spring force to switch to a defined safety position when compressed air is switched off and the spring chamber is exhausted, achieving up to SIL 2 in low demand mode, SIL 1 in high demand mode, and up to SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8107708 is an industrial component featuring a nominal length of 10.5 mm, a mass moment of inertia of 0.28 kgmm², and a product weight of 50 g with RoHS compliant materials. This unit supports a maximum rotational speed of 10000 rpm, a transferable torque of 0.7 Nm, an IP40 degree of protection, and VDMA24364-B2-L LABS conformity for any mounting position. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%, integrating interface codes P4-28B for the actuator, 40RA for the motor in, and 28B for the coupling housing. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8113073 is an L-shaped industrial component featuring an additional push-in connector in a lengthwise configuration with a nominal width of 6.5 mm and a standard size. It utilizes an external thread R1/8 for pneumatic connection 1 and accommodates a 12 mm outside diameter pneumatic tubing for connection 2, incorporating a push-pull structural design and a blue releasing ring. Operating within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, or -13.775 psi to 116 psi) for compressed air according to ISO 8573-1:2010 [7:4:4], this component supports lubricated operation across an ambient temperature range of -5 °C to 60 °C. Offered in a pack size of 10 with a product weight of 32.26 g each, it features an external hexagon SW17 mounting type, a coated screwed plug seal, any mounting position, corrosion resistance class 1, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit your exact part number, quantity, and application requirements to receive a quote for this item.
View product details →
Festo
The Festo 8110226 industrial component features an actuator interface code of S62, a motor input interface code of 84AA, and a transferable torque of 17 Nm with a product weight of 1037 g. It supports any mounting position, provides IP40 degree of protection, and conforms to VDMA24364-B2-L LABS (PWIS) requirements with RoHS-compliant materials. Operating conditions include an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8102913 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300 and an ISO 5211 standard valve connection. Operating within a pressure range of 2 bar to 8 bar and a nominal operating pressure of 6 bar, this unit achieves a 90-degree swivel angle and includes an end-position adjusting range of -5 deg to 5 deg at both 0 degrees and the nominal swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, the safety mechanism utilizes spring force to switch to the defined safety position upon air exhaustion, supporting safety integrity levels up to SIL 2 in low demand mode and SIL 3 in redundant architecture. Please submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8107707 is an industrial component featuring a nominal length of 17.5 mm, a product weight of 71 g, and a mass moment of inertia of 0.28 kgmm². It accommodates a maximum rotational speed of 10000 rpm, delivers a transferable torque of 0.7 Nm, and includes actuator interface code P4-28B, motor in interface code 40R, and coupling housing interface code 28B. Designed with VDMA24364-B2-L LABS conformity and RoHS-compliant materials, the unit operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95% under an IP40 degree of protection in any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8110211 is an industrial component weighing 1050 g, featuring an actuator interface code of S62 and a motor-in interface code of 82AA. This unit delivers a transferable torque of 21 Nm and is built with RoHS-compliant materials conforming to VDMA24364-B2-L LABS (PWIS) standards with an IP40 degree of protection. Designed for installation in any mounting position, it operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8113072 is a standard-sized, L-shaped industrial component featuring an R1/8 external thread pneumatic connection 1 and an external hexagon SW17 for mounting. It utilizes a push-pull structural design with a 6.5 mm nominal width, a blue releasing ring, and a push-in connector for 10 mm outside diameter pneumatic tubing that can be mounted in any position. Operating within a temperature range of -5 °C to 60 °C, the component handles compressed air according to ISO 8573-1:2010 [7:4:4] at pressures from -0.095 MPa to 0.8 MPa and supports lubricated operation. Please submit part number 8113072, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 8107704, features a nominal length of 17.5 mm, a product weight of 59 g, and a mass moment of inertia of 0.28 kgmm². It supports a maximum rotational speed of 10000 rpm, a transferable torque of 0.7 Nm, and operates with actuator interface code P4-28B, motor input interface code 38AA, and coupling housing interface code 28B. Designed with an IP40 degree of protection, RoHS-compliant materials, and VDMA24364-B2-L LABS conformity, this unit functions in ambient temperatures from -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and relative air humidity levels of 0 to 95% in any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →Festo
The Festo NEBV-S1W37-KM-5-LE10 (543272) is a connecting cable manufactured by Festo, identified by GTIN 4052568091279. This industrial component facilitates specific wiring configurations within automated systems. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8102912 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300 and an ISO 5211 standard valve connection. This safety device operates at a nominal pressure of 4.5 bar and incorporates a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Certified to ISO 13849 and IEC 61508 for safety functions up to SIL 2 in low demand mode and SIL 3 in redundant architecture, the unit executes its safety switching position via spring force when compressed air is switched off and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8110208 industrial component features an actuator interface code of S62 and a motor in interface code of 80PB | 80R, delivering a transferable torque of 17 Nm at a product weight of 978 g. Certified with VDMA24364-B2-L LABS conformity and RoHS-compliant materials, this unit offers an IP40 degree of protection and supports any mounting position. It operates within ambient temperatures of -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and relative air humidity ranging between 0 and 95%. Submit the exact part number, quantity, and application requirements for a quote.
View product details →