Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo size 110 industrial component, part number 8107723, features a 1:1 gear ratio and a transferable torque of 25 Nm with a 0.3 Nm no-load driving torque. This RoHS-compliant unit weighs 5250 g, incorporates an actuator interface code of D60 alongside a motor-in interface code of 90GA, and achieves a maximum rotational speed of 5000 rpm while operating within an ambient temperature range of -10 °C to 60 °C. It offers IP40 protection, VDMA24364-B2-L LABS conformity, a mass moment of inertia of 799 kgmm², and supports any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113080 is a standard Y-shaped industrial component featuring a nominal width of 4.6 mm, an R1/8 external thread pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing. Operating across a temperature range of -5 °C to 60 °C, this push-pull design accommodates compressed air as per ISO 8573-1:2010 [7:4:4] at pressures from -0.095 MPa to 0.8 MPa. Each pack size contains 10 units, weighing 14.75 g each, featuring an external hexagon SW12 mounting type with a coated screwed plug seal and a blue releasing ring. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered by Festo, the part number 8110622 is an industrial component featuring a 14 mm width dimension, a product weight of 50 g, and a supply plate made of PA-reinforced material with RoHS compliance. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and a pilot pressure of 0.3 MPa to 0.8 MPa (3 bar to 8 bar). The unit includes a QS-8 pneumatic connection 1, a corrosion resistance class (CRC) of 1 for low corrosion stress, LABS conformity under VDMA24364-B1/B2-L, and an ambient temperature tolerance of -5 °C to 50 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8103226, is a size 80 part supplied in a pack size of 100 with a product weight of 33.3 g. The assembly features a high-alloy stainless steel spring guide, a corrosion resistance class (CRC) rating of 0 for no corrosion stress, and VDMA24364-B1/B2-L LABS conformity while complying with RoHS material standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8107722, features a size 86 frame with a 1:1 gear ratio and supports any mounting position. Weighing 2500 g with a mass moment of inertia of 175 kgmm², this unit delivers a transferable torque of 9.5 Nm and a no-load driving torque of 0.25 Nm up to a maximum rotational speed of 5000 rpm. It is constructed with RoHS compliant materials, conforms to VDMA24364-B2-L LABS (PWIS) standards, and provides an IP40 degree of protection for ambient temperatures between -10 °C and 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8113079 is a standard Y-shaped industrial component featuring a 2.6 mm nominal width, an external thread R1/8 pneumatic connection 1, and a pneumatic connection 2 for 4 mm outside diameter tubing. Utilizing a push-pull structural design with a coated screwed plug seal, this unit operates across a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) with compressed air as per ISO 8573-1:2010 [7:4:4]. It offers an external hexagon SW10 mounting type, allows lubricated operation, and complies with VDMA24364 Zone III LABS conformity with a class 4 ISO 14644-1 cleanroom suitability rating. Submit your exact part number, quantity, and application requirements to request a quote for this pack size of 10.
View product details →
Festo
The Festo industrial component, part number 8103225, is an individual unit weighing 16.5 g with a size of 40 and a corrosion resistance class of CRC 0 for no corrosion stress. Featuring a spring guide made of high-alloy stainless steel, the RoHS-compliant assembly meets VDMA24364-B1/B2-L LABS conformity and is supplied in a pack size of 100. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8110621 is an industrial component featuring a 14 mm width dimension, a supply plate material of PA-reinforced polymer, and a product weight of 30 g with RoHS compliant materials. It operates within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and a pilot pressure of 0.3 MPa to 0.8 MPa (3 bar to 8 bar) using compressed air as per ISO 8573-1:2010 [7:4:4]. Featuring a G1/8 pneumatic connection 1, this unit provides a corrosion resistance class (CRC) of 1 for low corrosion stress, VDMA24364-B1/B2-L LABS conformity, and an ambient temperature range of -5 °C to 50 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo NECU-S-M12G4-P1-IS, designated as part number 570953 and carrying GTIN-13 4052568058678, is an industrial plug component manufactured by Festo. This official plug product corresponds to the exact manufacturer specifications listed for the part. Request a quote for this Festo component by submitting your exact part number, required quantity, and application requirements.
View product details →
Festo
The Festo 8107720 is an industrial component featuring an actuator interface code of S95 and a motor input interface code of 84AA with a transferable torque of 60 Nm. Weighing 3063 g and compliant with RoHS material standards, this unit supports any mounting position and VDMA24364-B2-L LABS conformity. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity from 0 to 95%, and provides an IP40 degree of protection. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8113078 is an L-shaped industrial component featuring an 8.5 mm nominal width and an external hexagon SW17 mounting type with an R1/4 external thread and a connection for a 12 mm outside diameter pneumatic tubing. This standard-sized unit utilizes a push-pull structural design with a coated screwed plug seal and operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Supplied in a pack size of 10 with a product weight of 35.96 g each, the assembly accommodates lubricated operation, achieves a CRC 1 corrosion resistance class, and meets VDMA24364 Zone III LABS conformity along with ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8103224 is an industrial component featuring a size of 20 and a product weight of 7.8 g, supplied in a pack size of 100. Built with a high-alloy stainless steel spring guide, this RoHS compliant element exhibits a corrosion resistance class (CRC) of 0 for no corrosion stress and adheres to VDMA24364-B1/B2-L LABS conformity. Submit your exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8110429 is an industrial component featuring a width of 10 mm and a product weight of 240 g, designed for pneumatic vertical stacking with a shut-off for 1. Engineered with a wrought aluminum alloy and PA-reinforced housing providing IP65 protection and CRC 2 moderate corrosion stress resistance, it operates within a pressure range of 3 bar to 8 bar and temperatures from -5 °C to 50 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. This RoHS-compliant part delivers a standard nominal flow rate of 103 l/min for pressurization and 213 l/min for exhaust air, supporting mounting on a manifold or individual sub-base in any position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8107714 industrial component features a nominal length of 54 mm, a mass moment of inertia of 45 kgmm², and a transferable torque of 17 Nm with a maximum rotational speed of 6000 rpm. This RoHS compliant part includes actuator interface code N48, motor interface codes 80PB and 80R, and a product weight of 625 g with IP40 degree of protection. Operating within an ambient temperature range of -10 °C to 60 °C, relative air humidity of 0 to 95%, storage temperature from -25 °C to 60 °C, and VDMA24364-B2-L LABS conformity, it supports mounting in any position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113077 is an L-shaped industrial component featuring an R1/4 external thread and a push-in connector for 10 mm pneumatic tubing, operating via a push-pull design with a coated screwed plug seal. Engineered for compressed air media under operating pressures from -0.95 bar to 8 bar across a -5 °C to 60 °C temperature range, this standard-sized part weighs 30.14 g and offers ISO Class 4 cleanroom suitability with a VDMA24364 Zone III LABS conformity. Supplied in a pack size of 10, it permits lubricated operation and mounts externally using an SW17 hexagon in any position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8102916 is a single-acting industrial valve actuator featuring a size 2300 gear rack and pinion structural design with a 90-degree swivel angle and an F16 flange hole pattern. Certified for safety functions to ISO 13849 and IEC 61508, this safety device switches to the defined safety position via spring force when compressed air is switched off and the spring chamber is exhausted, supporting up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. It operates at a nominal pressure of 6 bar (87 psi) with an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, integrating standard ISO 5211 valve connections and VDI/VDE 3845 NAMUR compliance for positioners and sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8110371 is an industrial component featuring PROFINET IRT and PROFINET RT protocols, housed in die-cast aluminum with IP65 and IP67 protection ratings. Measuring 50 mm x 107 mm x 80 mm with a weight of 280 g, it operates within an ambient temperature range of -5 °C to 50 °C and includes comprehensive LED status displays for both product-specific and bus-specific diagnostics. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8107712 is an industrial component featuring a nominal length of 10.5 mm, a product weight of 49 g, and a transferable torque of 1.1 Nm supporting a maximum rotational speed of 10000 rpm. This unit includes a mass moment of inertia of 0.28 kgmm², an IP40 degree of protection, and VDMA24364-B2-L LABS conformity with RoHS compliance. It operates within ambient temperatures of -10 °C to 60 °C, storage temperatures of -25 °C to 60 °C, and relative air humidity levels from 0 to 95% in any mounting position utilizing actuator interface code P5-28B, motor in interface code 40RA, and coupling housing interface code 28B. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113076 is a standard-sized L-shaped industrial component featuring an additional push-in connector in a lengthwise design with a 6 mm nominal width and an external hexagon SW14 mounting type. This part utilizes a coating seal on the R1/4 external thread for pneumatic connection 1 and accepts an 8 mm outside diameter pneumatic tubing for connection 2, operating within a pressure range of -0.95 bar to 8 bar and ambient temperatures from -5 °C to 60 °C. Constructed with a push-pull structural design and a blue releasing ring, it weighs 17.8 g, supports lubricated compressed air per ISO 8573-1:2010 [7:4:4], achieves CRC 1 low corrosion stress, meets VDMA24364 Zone III LABS conformity, and complies with ISO 14644-1 Class 4 cleanroom standards as well as RoHS material regulations in any mounting position. Please submit the exact part number, quantity, and application requirements to receive a formal quotation for a pack size of 10.
View product details →
Festo
The Festo NECC-L2G4-C1, identified by part number 8024782 and GTIN 4052568062866, is an industrial plug component manufactured by Festo. This official Festo product corresponds to the NECC-L2G4-C1 specification. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →