Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8060545 is an externally controlled 2/2 poppet valve featuring a piston actuator and a pneumatic actuation type designed for in-line installation in any mounting position. It manages gaseous and liquid media such as vapor, water, neutral liquids, mineral oils, hydraulic fluids based on mineral oil, inert gases, and filtered compressed air with a 200 µm filter mesh, operating at medium pressures from 0 MPa to 2.3 MPa and a maximum viscosity of 600 mm²/s. The unit utilizes a threaded sleeve 1 NPT cable connection per ANSI/ASME B 1.20.1, an internal thread G1/8 pneumatic connection, a mechanical spring reset method, and a flow rate Kv of 22.6 m³/h across a medium temperature range of -10 °C to 180 °C. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 8063472 industrial component features a nominal length of 47.3 mm, a mass moment of inertia of 14.5 kgmm², and a product weight of 536 g with RoHS-compliant materials. Designed with an L48 actuator interface code and a 60PA motor-in interface code, this unit delivers a transferable torque of 12.5 Nm at a maximum rotational speed of 8000 rpm in any mounting position. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%, while providing IP40 degree of protection and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8065274 is a single-acting industrial component utilizing a gear rack and pinion structural design with a size 2300 valve actuator and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar and a nominal operating pressure of 6 bar, this safety device achieves its safety function through a spring assembly that switches the actuator to the defined safety switching position when compressed air is switched off and the spring chamber is exhausted. It features an F1216 flange hole pattern, an ISO 5211 standard valve connection, a VDI/VDE 3845 NAMUR valve connection, and a VDI/VDE 3845 Size AA 3 connection point for positioners and position sensors, with certification for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8060544 is an externally controlled 2/2 industrial component featuring a poppet valve with a piston actuator and a mechanical spring reset method. Designed for in-line installation in any mounting position with a 1 NPT threaded sleeve cable connection and G1/8 internal thread pneumatic connection, it handles gaseous and liquid media—including mineral oil, water, vapor, inert gas, and neutral liquids—at medium pressures from 0 MPa to 0.83 MPa and operating pressures from 0.5 MPa to 1 MPa. This non-reversible valve provides a Kv flow rate of 20.3 m³/h for media temperatures between -10 °C and 180 °C and is rated for weather-protected exterior locations under class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8058508 is an industrial component featuring a unidirectional flow measuring range from 0 l/min to 2 l/min with a 12-bit ADC resolution and 2 x PNP or 2 x NPN switchable switching outputs utilizing a window comparator. It operates within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar | -13.05 psi to 145 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] or nitrogen at medium and ambient temperatures between 0 °C and 50 °C. The unit carries RCM compliance, CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo industrial component, part number 8063471, features a nominal length of 37.3 mm, a mass moment of inertia of 14.5 kgmm², and a transferable torque of 12.5 Nm with a maximum rotational speed of 8000 rpm. Designed with actuator interface code L48 and motor input interface code 55A, the 482 g unit operates in ambient temperatures from -10 °C to 60 °C, supports 0 to 95% relative air humidity, and provides an IP40 degree of protection in any mounting position. This RoHS-compliant part adheres to VDMA24364-B2-L LABS conformity and is rated for storage temperatures between -25 °C and 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8065273 is a double-acting industrial component featuring a gear rack and pinion structural design with a size 2300 valve actuator and a 90-degree swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, this safety device operates within a pressure range of 2 bar to 8 bar and supports safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. It incorporates an F1216 flange hole pattern, an ISO 5211 standard valve connection, and a VDI/VDE 3845 NAMUR-compliant valve connection with any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8063470 industrial component features an actuator interface code of L38, a motor-in interface code of 72GA, and a transferable torque of 4.4 Nm. Weighing 531 g with a nominal length of 54.9 mm, this part operates at a maximum rotational speed of 8000 rpm and incorporates a mass moment of inertia of 4 kgmm² in any mounting position. It functions within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%, while providing IP40 protection, VDMA24364-B2-L LABS conformity, and RoHS compliant materials. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8060543 is an externally controlled 2/2 poppet valve with a piston actuator designed for in-line installation in any mounting position. Featuring a non-reversible flow direction under the valve seat, this component regulates vapor, hydraulic fluid based on mineral oil, inert gas, mineral oil, water, filtered compressed air with a 200 µm filter mesh, and neutral liquids up to a max viscosity of 600 mm²/s. It operates at a medium pressure of 0 bar to 30 bar and an operating pressure of 5 bar to 10 bar, utilizing a 3/4 NPT threaded sleeve cable connection and a G1/8 internal thread pneumatic connection. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8058507 is an industrial component measuring volume and volumetric flow rate within a unidirectional flow measuring range of 0 l/min to 2 l/min. Operating across pressures from -0.09 MPa to 1 MPa (-0.9 bar to 10 bar or -13.05 psi to 145 psi) with an overload pressure of 1.6 MPa (16 bar or 232 psi), this RoHS-compliant device features 2 x PNP or 2 x NPN switchable outputs and a 12-bit ADC resolution. It functions with compressed air as per ISO 8573-1:2010 [7:4:4] or nitrogen within a medium and ambient temperature range of 0 °C to 50 °C, carrying RCM compliance alongside CE and UKCA markings for EMC and RoHS directives. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8065272 is a single-acting gear rack and pinion industrial valve actuator featuring a size 1200 designation, an F14 flange hole pattern, and a nominal 90-degree swivel angle with an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal angle. Certified as a safety device to ISO 13849 and IEC 61508, the unit incorporates a safety function driven by spring force to switch to a defined safety position upon air supply exhaustion, supporting up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. It operates at a nominal pressure of 6 bar (87 psi) within an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, utilizing an ISO 5211 standard valve connection and VDI/VDE 3845 compliance for the NAMUR valve connection and size AA 3 positioner and sensor connection point. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered by Festo, this industrial component features a nominal length of 54.9 mm, a transferable torque of 4.4 Nm, and a maximum rotational speed of 8000 rpm with a mass moment of inertia of 4.6 kgmm². The unit includes actuator interface code L38 and motor input interface code 68GA, offering an IP40 degree of protection, RoHS compliant materials, and VDMA24364-B2-L LABS conformity. It operates within ambient temperatures of -10 °C to 60 °C, storage temperatures of -25 °C to 60 °C, and relative air humidity levels up to 95% in any mounting position, weighing a total of 417 g. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8060542 is a 2/2 poppet valve with a piston actuator featuring pneumatic external control and a mechanical spring reset. Designed for in-line installation in any mounting position, this component utilizes a 3/4 NPT threaded sleeve cable connection according to ANSI/ASME B 1.20.1 and a G1/8 internal thread pneumatic connection. It provides non-reversible flow under the valve seat for gaseous and liquid media including vapor, water, mineral oil, neutral liquids, inert gas, and mineral oil-based hydraulic fluid up to a maximum viscosity of 600 mm²/s. Operating within a medium pressure range of 0 MPa to 1.28 MPa and an operating pressure of 0.5 MPa to 1 MPa, the valve supports a medium temperature of -10 °C to 180 °C, an ambient temperature of 0 °C to 60 °C, and a flow rate Kv of 13.3 m³/h for weather-protected exterior locations classified as class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8058506 industrial component is a unidirectional flow sensor with a measuring range from 0 l/min to 2 l/min, operating across a pressure span of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar or -13.05 psi to 145 psi) with an overload pressure rating of 1.6 MPa (16 bar or 232 psi). It features a 12-bit ADC resolution, flow rate accuracy of ±(5% o.m.v. + 2% FS), and 2 x PNP or 2 x NPN switchable switching outputs with window and threshold value comparator functions. Designed for compressed air per ISO 8573-1:2010 [7:4:4] or nitrogen within a medium and ambient temperature range of 0 °C to 50 °C, this RoHS compliant unit carries RCM, CE, and UKCA conformity markings. Submit the part number, quantity, and application requirements to receive an exact quotation.
View product details →
Festo
The Festo industrial component, part number 8063468, features a nominal length of 41.9 mm, a product weight of 539 g, and a mass moment of inertia of 4.6 kgmm². This unit accommodates any mounting position, supports a maximum rotational speed of 8000 rpm, and transfers up to 4.4 Nm of torque utilizing actuator interface code L38 and motor input interface code 70GA. It is rated at IP40 protection with RoHS-compliant materials, VDMA24364-B2-L LABS conformity, an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity tolerance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8065271 is a double-acting gear rack and pinion valve actuator of size 1200 featuring an F14 flange hole pattern, a 90-degree swivel angle, and an ISO 5211 standard valve connection. Certified for safety functions to ISO 13849 and IEC 61508, this safety device operates at a nominal pressure of 5.5 bar (79.75 psi) within an operating range of 2 bar to 8 bar and supports SIL 2 low demand mode, SIL 1 high demand mode, and SIL 3 in a redundant architecture. It includes VDI/VDE 3845 NAMUR valve connections, a 38 mm shaft connection depth, and an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal swivel angle. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8060541 is a 2/2 poppet valve with a piston actuator featuring pneumatic actuation and external control via a G1/8 internal thread pneumatic connection. Engineered for on/off control of vapor, hydraulic fluid based on mineral oil, inert gas, mineral oil, water, filtered compressed air with a 200 µm filter mesh, and neutral liquids, it operates within a medium pressure range of 0 MPa to 3 MPa and an operating pressure of 0.5 MPa to 1 MPa. This component utilizes in-line installation with any mounting position, incorporates a threaded sleeve 1/2 NPT cable connection per ANSI/ASME B 1.20.1, and achieves a flow rate Kv of 6 m³/h for non-reversible under-seat flow of gaseous and liquid media up to 600 mm²/s viscosity. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo 8063467 is an industrial component featuring an actuator interface code of L38 and a motor-in interface code of 56GA with a transferable torque of 4.4 Nm and a maximum rotational speed of 8000 rpm. This unit has a nominal length of 44.9 mm, a mass moment of inertia of 3.5 kgmm², a product weight of 336 g, and an IP40 degree of protection supporting any mounting position. Compliant with RoHS materials notes and VDMA24364-B2-L LABS conformity, the hardware operates within ambient temperatures from -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and relative air humidity ranging from 0 to 95%. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8058505 industrial component utilizes a thermal measuring principle for unidirectional volume and volumetric flow rate monitoring, operating across a range of 0 l/min to 2 l/min. This unit functions with compressed air as per ISO 8573-1:2010 [7:4:4] or nitrogen, handling an operating pressure from -0.09 MPa to 1 MPa (-0.9 bar to 10 bar / -13.05 psi to 145 psi) and an overload pressure of 1.6 MPa (16 bar / 232 psi). It features a 12-bit ADC resolution, a flow rate accuracy of ± (5% o.m.v. + 2% FS), and holds RCM compliance along with CE and UKCA markings for EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8060540 is a poppet valve featuring a diaphragm actuator and an in-line installation design that supports mounting in any position. This externally controlled 2/2 valve operates with a mechanical spring reset method, a non-reversible flow direction under the valve seat, and a flow rate Kv of 77.9 m³/h for gaseous and liquid media. It handles medium pressures from 0 MPa to 0.56 MPa, operating pressures from 0.5 MPa to 0.7 MPa, medium temperatures ranging from -10 °C to 180 °C, and a maximum viscosity of 600 mm²/s. Submit the exact part number, quantity, and application requirements for a quote.
View product details →