Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8058465 is an industrial component utilizing a thermal measuring principle based on heat transfer to measure mass flow and volumetric flow rate in a unidirectional flow direction. This device features a flow measuring range from 0.02 l/min to 1 l/min, an operating pressure of -0.9 bar to 10 bar, and operates within a medium and ambient temperature range of 0 °C to 50 °C using argon, nitrogen, or compressed air as per ISO 8573-1:2010 [6:4:4]. It carries RCM compliance, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8060518 is a 2/2 externally controlled industrial component featuring a poppet valve design with a diaphragm actuator and a mechanical spring reset method for on/off operation of vapor, inert gas, and filtered compressed air up to 600 mm²/s viscosity. This in-line mountable valve supports non-reversible flow above the valve seat for gaseous media across a medium pressure range of 0 MPa to 1.6 MPa and medium temperatures from -10 °C to 180 °C, utilizing G2 threaded sleeve cable connections and G1/8 internal thread pneumatic connections. It operates with a control pressure of 0.5 MPa to 0.7 MPa, achieves a flow rate Kv of 68.5 m³/h, and is rated for weather-protected exterior locations based on IEC 60654-1 class C1 with any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component features a size 120 valve actuator with a gear rack and pinion structural design, a 90-degree swivel angle, and an F0507 flange hole pattern. Operating at a nominal pressure of 6 bar (87 psi) with an operating range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, the single-acting device closes to the right and incorporates a safety function utilizing spring force to switch to a defined safety position upon air exhaustion. It includes an ISO 5211 standard valve connection, a 19 mm shaft connection depth, VDI/VDE 3845 NAMUR valve compatibility, and VDI/VDE 3845 Size AA 1 connection points for positioners and sensors, supporting any mounting position and certified to ISO 13849 and IEC 61508 for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in redundant architecture. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8058464 industrial component is a thermal, unidirectional flow measuring device utilizing heat transfer to monitor mass flow and volumetric flow rates from 0.01 l/min to 0.5 l/min for argon, nitrogen, and compressed air complying with ISO 8573-1:2010 [6:4:4]. It operates across a pressure range of -0.9 bar to 10 bar and ambient and medium temperatures from 0 °C to 50 °C, achieving a flow rate accuracy of ± (2% o.m.v. + 1% FS) at a nominal temperature of 23 °C. The unit carries RCM and c UL us - Listed (OL) certifications alongside CE and UKCA markings per EU and UK EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8063351 is a nature-colored PTFE industrial component featuring a 5/16 inch external diameter, a 5.9 mm inside diameter, and a Shore hardness of D 55 +/-5. This pneumatic tubing operates with compressed air as per ISO 8573-1:2010 [7:-:-], supporting an operating pressure of -0.95 bar to 5 bar across the entire temperature range and up to 12 bar under temperature-dependent conditions. Built with UL94 V-0 material fire test compliance and VDMA24364-B2-L LABS conformity, the part functions within an ambient temperature range of -20 °C to 150 °C and weighs 0.049 kg/m. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8060517 is a 2/2 externally controlled industrial component featuring a poppet valve with a diaphragm actuator and a non-reversible flow direction above the valve seat for gaseous media. This pneumatic device operates with a medium pressure range of 0 bar to 16 bar, an operating pressure of 5 bar to 7 bar, a mechanical spring reset method, and a flow rate Kv of 47.4 m³/h. It accommodates vapor, inert gas, and filtered compressed air within a medium temperature range of -10 °C to 180 °C and supports in-line installation in any mounting position for weather-protected exterior locations class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8048133 is a single-acting industrial valve actuator featuring a size 120 gear rack and pinion structural design with an F0507 flange hole pattern and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, this safety device incorporates spring force to switch to a defined safety position when compressed air is switched off and the spring chamber is exhausted. It complies with VDI/VDE 3845 for valve and positioner connections, offers an ISO 5211 standard valve connection, and is certified for functional safety up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in redundant architectures per ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component (Part Number 8063350) is a nature-colored PTFE pneumatic tubing featuring a 5/32-inch external diameter, a 2.9 mm inside diameter, and a Shore hardness of D 55 +/-5. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -20 °C to 150 °C, supporting an operating pressure of -0.095 MPa to 0.5 MPa across the entire temperature range and up to 1.2 MPa depending on temperature. The tubing has a minimum and flow-relevant bending radius of 32 mm, a weight of 0.013 kg/m, UL94 V-0 fire test material compliance, VDMA24364-B2-L LABS conformity, and is supplied without printing. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8058463 is an industrial thermal mass flow component utilizing a heat transfer measurement method for unidirectional mass and volumetric flow rate monitoring of compressed air as per ISO 8573-1:2010 [6:4:4], argon, and nitrogen. This device operates within a pressure range of -0.9 bar to 10 bar, an ambient and medium temperature range of 0 °C to 50 °C, and a flow measuring range from 0.01 l/min to 0.5 l/min with a flow rate accuracy of ± (2% o.m.v. + 1% FS). Certified with RCM compliance and c UL us - Listed (OL) markings, it conforms to EU and UK directives for EMC and RoHS, and features RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8060516 is a 2/2 poppet valve with a diaphragm actuator featuring external pneumatic control via a G1/8 internal thread and an operating pressure range of 0.5 MPa to 0.7 MPa. Designed for in-line installation in any mounting position, this non-reversible valve directs flow above the valve seat for vapor, inert gas, and filtered compressed air media up to 600 mm²/s viscosity, handling medium pressures from 0 MPa to 1.6 MPa and temperatures between -10 °C and 180 °C with a Kv flow rate of 35.4 m³/h. It utilizes a mechanical spring reset, a G1 1/4 threaded sleeve cable connection per DIN ISO 228, and is rated for weather-protected exterior locations based on IEC 60654-1 class C1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo size 32 industrial component features a working stroke of 800 mm and a recirculating ball bearing guide supporting a maximum speed of 1.5 m/s and acceleration up to 15 m/s². Operating at a 100% duty cycle within an ambient temperature range of 0 °C to 50 °C, this unit provides IP40 protection, position sensing via proximity switches for inductive sensors, and suitability for Li-ion battery production with reduced Cu/Zn/Ni values. It achieves ISO Class 7 cleanroom compatibility, VDMA24364 Zone III LABS conformity, and CRC 0 corrosion resistance, alongside structural ratings including a 356 N maximum force for Fy and Fz, 1.3 Nm maximum torque Mx, and second moments of area Iy at 38000 mm⁴ and Iz at 45000 mm⁴. Submit part number 8062876, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8048132 is a double-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 480 and a 90-degree swivel angle. It incorporates an F1012 flange hole pattern, a 29 mm shaft connection depth, and an ISO 5211 standard valve connection conforming to VDI/VDE 3845 (NAMUR). Certified for safety functions to ISO 13849 and IEC 61508, the device supports up to SIL 2 in low demand mode and up to SIL 1 in high demand mode, with an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8058462 is a thermal industrial component utilizing heat transfer to measure mass flow and volumetric flow rate in a unidirectional flow direction. It operates within a flow measuring range of 0.002 l/min to 0.1 l/min, an operating pressure of -0.9 bar to 10 bar, and a medium and ambient temperature range of 0 °C to 50 °C for argon, nitrogen, and compressed air as per ISO 8573-1:2010 [6:4:4]. Certified with the RCM compliance mark and c UL us-Listed (OL), this RoHS compliant device features CE and UKCA markings as per EU and UK EMC and RoHS directives, delivering a flow rate accuracy of ± (2% o.m.v. + 1% FS) at a nominal temperature of 23 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8060515 is an externally controlled 2/2 poppet valve with a piston actuator designed for on/off operation of vapor, inert gas, and filtered compressed air with a 200 µm filter mesh up to 600 mm²/s viscosity. This non-reversible valve features a G1 threaded sleeve connection for in-line installation in any mounting position, delivering a Kv flow rate of 21.5 m³/h across a medium pressure range of 0 bar to 16 bar and medium temperatures from -10 °C to 180 °C. Operating via a G1/8 internal thread pneumatic connection at pressures from 5 bar to 10 bar, the unit utilizes a mechanical spring reset and is rated for weather-protected exterior locations under class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8062835 is an industrial guide featuring a structural design with a recirculating ball bearing guide and a 2000 mm working stroke in size 80. This component supports any mounting position, position sensing via proximity switches or inductive sensors, a 100% duty cycle, a maximum acceleration of 15 m/s², and a maximum speed of 1.5 m/s. It delivers a maximum force Fy and Fz of 5543 N, a maximum torque Mx of 59.8 Nm, 2nd moments of area Iy of 1370000 mm⁴ and Iz of 1660000 mm⁴, an IP40 degree of protection, and an ambient temperature range of 0 °C to 50 °C, alongside a CRC of 0, VDMA24364 Zone III LABS conformity, suitability for Li-ion battery production with reduced Cu/Zn/Ni values (F1a), and ISO 14644-1 Class 7 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8048131 is a double-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 300, an F0710 flange hole pattern, and a nominal swivel angle of 90 degrees. Certified for safety functions to ISO 13849 and IEC 61508, this safety device supports low demand mode up to SIL 2, high demand mode up to SIL 1, and up to SIL 3 in a redundant architecture within an operating pressure range of 2 bar to 8 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered by Festo with an 1800 mm working stroke and size 80 structural design, this industrial component features a recirculating ball bearing guide supporting a maximum speed of 1.5 m/s, 15 m/s² max acceleration, and 100% duty cycle. The unit provides position sensing via proximity switch or for inductive sensors, IP40 protection, and an ambient temperature range of 0 °C to 50 °C with any mounting position. It achieves max forces Fy and Fz of 5543 N, max torque Mx of 59.8 Nm, 2nd moments of area Iy (1370000 mm⁴) and Iz (1660000 mm⁴), 0 - No corrosion stress CRC, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and reduced Cu/Zn/Ni suitability for Li-ion battery production. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8058461 is an industrial component utilizing a thermal, heat transfer measuring principle to monitor mass flow and volumetric flow rate in a unidirectional flow direction. This device features a flow measuring range from 0.002 l/min to 0.1 l/min, an operating pressure ranging from -0.9 bar to 10 bar, and compatibility with compressed air as per ISO 8573-1:2010 [6:4:4], argon, and nitrogen within a medium and ambient temperature range of 0 °C to 50 °C. It complies with RCM, c UL us - Listed (OL), EU and UK EMC directives, EU and UK RoHS instructions, and is RoHS compliant. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component features a poppet valve with a piston actuator designed for pneumatic actuation in any mounting position via in-line installation and a G3/4 threaded sleeve connection per DIN ISO 228. Operating with a 2/2 non-reversible valve function for gaseous media above the valve seat, it handles a medium pressure range from 0 to 1.6 MPa and a flow rate Kv of 14.5 m³/h for vapor, inert gas, and filtered compressed air. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8048130 is a double-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 240 and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) at a nominal operating pressure of 5.5 bar, this safety device includes an F0710 flange hole pattern, an ISO 5211 standard valve connection, and is certified for safety functions up to SIL 2 in low demand mode and SIL 1 in high demand mode according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →