Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8060525 is a 2/2 poppet valve with a diaphragm actuator and an externally controlled pneumatic actuation type featuring a mechanical spring reset method. This in-line installation component operates with non-reversible flow above the valve seat for gaseous media, handling medium pressures from 0 MPa to 1.6 MPa and temperatures between -10 °C and 180 °C with a Kv flow rate of 68.5 m³/h. Designed with a threaded sleeve 2 NPT cable connection, internal thread G1/8 pneumatic connection, and weather-protected class C1 exterior use based on IEC 60654-1, it regulates vapor, inert gas, and filtered compressed air up to 600 mm²/s viscosity. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this industrial component.
View product details →
Festo
The Festo industrial component, part number 8063445, features a nominal length of 27.1 mm, a mass moment of inertia of 0.355 kgmm², and a transferable torque of 2 Nm for rotational speeds up to 10000 rpm. This RoHS-compliant unit weighs 131 g, includes actuator interface code L27 and motor-in interface code 40R, and provides an IP40 degree of protection with VDMA24364-B2-L LABS conformity for any mounting position. It operates within an ambient temperature range of -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and relative air humidity levels of 0 to 95%. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8048140 is a single-acting gear rack and pinion industrial valve actuator featuring a size 300 actuator, a 90-degree swivel angle, and an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) with a nominal operating pressure of 6 bar (87 psi). Designed as a safety device conforming to VDMA 66413, it utilizes spring force to switch to a defined safety position when compressed air is switched off and the spring chamber is exhausted, achieving functional safety ratings up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture per IEC 61508 and ISO 13849. The unit includes an F0710 flange hole pattern, a 24 mm shaft connection depth, ISO 5211 standard valve connection, VDI/VDE 3845 NAMUR valve connection, and VDI/VDE 3845 Size AA 2 positioner and position sensor connection points, supporting any mounting position, right-closing direction, and end-position adjusting ranges of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8063444 is an industrial component featuring a nominal length of 18.1 mm, a product weight of 102 g, and RoHS-compliant materials with VDMA24364-B2-L LABS conformity. This unit operates at a maximum rotational speed of 10000 rpm, a transferable torque of 1.5 Nm, a mass moment of inertia of 0.355 kgmm², and utilizes an actuator interface code L27 with a motor in interface code 40A. Built with an IP40 degree of protection, it supports any mounting position, an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 8058470 is an industrial component utilizing a thermal heat transfer measuring principle for unidirectional mass flow and volumetric flow rate measurement of argon, nitrogen, and compressed air conforming to ISO 8573-1:2010 [6:4:4]. It operates within a flow measuring range of 0.2 l/min to 10 l/min, an operating pressure of -0.9 bar to 10 bar, and medium and ambient temperatures from 0 °C to 50 °C, featuring an accuracy of flow rate of ± (2% o.m.v. + 1% FS) at a nominal temperature of 23 °C. Certified with the RCM compliance mark and c UL us - Listed (OL), this RoHS-compliant device carries CE and UKCA markings as per EU and UK directives for EMC and RoHS. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8060524 is an externally controlled 2/2 poppet valve featuring a diaphragm actuator and non-reversible flow direction above the valve seat for gaseous media. This in-line pneumatic component operates with medium pressures from 0 to 1.6 MPa, a Kv flow rate of 47.4 m3/h, and a mechanical spring reset method utilizing a 1 1/2 ANSI/ASME B 1.20.1 threaded sleeve cable connection and internal G1/8 pneumatic connection. Designed for on/off operation with vapor, inert gas, or filtered compressed air up to 600 mm2/s viscosity, it functions within a medium temperature range of -10 °C to 180 °C and an ambient temperature range of 0 °C to 60 °C in weather-protected exterior locations. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8048139 is a single-acting gear rack/pinion industrial valve actuator with a size of 300 and a 90-degree swivel angle. Featuring an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR compliance, this component operates at a nominal pressure of 3 bar (43.5 psi) within an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and includes a safety function that switches the actuator to a defined safety position via spring force when compressed air is removed and the spring chamber is exhausted. Certified for safety functions to ISO 13849 and IEC 61508, the unit supports safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8058469 is an industrial component utilizing a thermal heat transfer measuring principle to monitor mass flow and unidirectional volumetric flow rate with a measuring range from 0.2 l/min to 10 l/min. It operates within a pressure range of -0.9 bar to 10 bar and supports compressed air as per ISO 8573-1:2010 [6:4:4], argon, and nitrogen at medium and ambient temperatures between 0 °C and 50 °C. The unit carries c UL us - Listed (OL) and RCM compliance marks alongside CE and UKCA markings corresponding to EU and UK EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8060523 is a 2/2 externally controlled industrial component featuring a poppet valve design with a diaphragm actuator and a threaded sleeve 1 1/4 connection per ANSI/ASME B 1.20.1 for in-line installation in any mounting position. It directs non-reversible flow above the valve seat for gaseous media, vapor, inert gas, and filtered compressed air with a 200 µm filter mesh up to 600 mm²/s viscosity, operating across a medium pressure range of 0 bar to 16 bar and a Kv flow rate of 35.4 m³/h. Featuring a mechanical spring reset method, G1/8 internal thread pneumatic connection, and weather-protected exterior use class C1 based on IEC 60654-1, this valve handles medium temperatures from -10 °C to 180 °C and ambient temperatures from 0 °C to 60 °C at an operating pressure of 5 bar to 7 bar using ISO 8573-1:2010 [7:4:4] compressed air for on/off medium control. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8048138 is a single-acting industrial valve actuator featuring a gear rack and pinion structural design with a size 240 valve actuator and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, this safety device executes a defined safety switching position upon compressed air loss and spring chamber exhaustion via internal spring force. It integrates an ISO 5211 standard valve connection, F0710 flange hole pattern, VDI/VDE 3845 NAMUR valve interface, and VDI/VDE 3845 Size AA 2 positioner connection point, while achieving SIL 2 low demand mode, SIL 1 high demand mode, and SIL 3 in redundant architectures per ISO 13849 and IEC 61508 certifications. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 8058468 industrial component utilizes a thermal heat transfer measuring principle based on the thermal method to monitor mass flow and volumetric flow rate in a unidirectional flow direction. Operating within a pressure range of -0.9 bar to 10 bar, this unit measures argon, nitrogen, and compressed air complying with ISO 8573-1:2010 [6:4:4] across a flow measuring range from 0.1 l/min to 5 l/min with a flow rate accuracy of ± (2% o.m.v. + 1% FS). Certified with the RCM compliance mark and c UL us - Listed (OL), the device bears CE and UKCA markings in accordance with EU and UK EMC and RoHS directives while utilizing RoHS compliant materials. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8060522 is an externally controlled 2/2 poppet valve with a piston actuator utilizing a mechanical spring reset method for non-reversible above-seat flow of vapor, inert gas, and filtered compressed air up to 600 mm²/s viscosity. Featuring in-line installation with any mounting position, a 1 NPT threaded sleeve connection, and a G1/8 internal thread pneumatic connection, this component operates at medium pressures from 0 to 1.6 MPa and operating pressures from 0.5 to 1 MPa across medium temperatures of -10 °C to 180 °C. It provides a Kv flow rate of 21.5 m³/h for on/off medium control in weather-protected exterior locations classified as class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8048137 is a single-acting gear rack/pinion industrial valve actuator featuring a size 240 construction, an F0710 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 deg to 5 deg at both 0 degrees and the nominal angle. Operating at a nominal pressure of 3 bar (43.5 psi) within a 2 bar to 8 bar range and a 24 bar burst pressure, this safety device closes to the right via spring force when compressed air is switched off and the spring chamber is exhausted. It complies with ISO 5211 and VDI/VDE 3845 NAMUR standards, incorporates a VDI/VDE 3845 Size AA 2 connection point for positioners and sensors, features a 24 mm shaft connection depth, and is certified for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8060521 is an externally controlled 2/2 poppet valve with a piston actuator designed for on/off operation of vapor, inert gas, and filtered compressed air within a medium pressure range of 0 bar to 16 bar. Featuring non-reversible flow above the valve seat and a mechanical spring reset, this pneumatic component operates at a flow rate Kv of 14.5 m³/h for media temperatures from -10 °C to 180 °C and ambient temperatures from 0 °C to 60 °C. It includes a 3/4 NPT threaded sleeve cable connection, an internal thread G1/8 pneumatic connection, and supports in-line installation in any mounting position within weather-protected exterior locations. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8058467 industrial component utilizes a thermal heat transfer measuring principle to monitor mass flow and volumetric flow rate across a unidirectional flow direction with a measuring range from 0.1 l/min to 5 l/min. It operates within a pressure range of -0.9 bar to 10 bar and handles argon, nitrogen, and compressed air as per ISO 8573-1:2010 [6:4:4] at medium and ambient temperatures between 0 °C and 50 °C. The unit features flow rate accuracy of ± (2% o.m.v. + 1% FS), a zero point repetition accuracy of 0.2 %FS, carries RCM and c UL us - Listed (OL) certifications, and complies with EU and UK EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo part number 8048136 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 160, an F0710 flange hole pattern, and a 90-degree swivel angle. It operates within a pressure range of 2 bar to 8 bar and incorporates a safety function that switches the actuator to a defined safety position utilizing spring force when compressed air is removed and the spring chamber is exhausted. Certified to ISO 13849 and IEC 61508, this safety device supports applications up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo 8060520 industrial component is an externally controlled 2/2 poppet valve featuring a piston actuator and mechanical spring reset method for on/off operation of gaseous media, vapor, inert gas, and filtered compressed air with a maximum viscosity of 600 mm²/s. Designed for in-line installation in any mounting position within weather-protected exterior locations under class C1 based on IEC 60654-1, the valve handles a medium pressure range of 0 MPa to 1.6 MPa and medium temperatures from -10 °C to 180 °C with a flow rate Kv of 6.6 m³/h. It utilizes a 1/2 NPT threaded sleeve cable connection per ANSI/ASME B 1.20.1, internal thread G1/8 pneumatic connections, and an operating pressure of 0.5 MPa to 1 MPa utilizing compressed air per ISO 8573-1:2010 [7:4:4] through a 200 µm filter mesh. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8058466 is an industrial component utilizing a thermal heat transfer measuring principle for unidirectional mass flow and volumetric flow rate monitoring across a 0.02 l/min to 1 l/min measuring range. Operating within a -0.9 bar to 10 bar pressure range and 0 °C to 50 °C temperature parameters, this RoHS-compliant device measures argon, nitrogen, and compressed air conforming to ISO 8573-1:2010 [6:4:4] standards. It carries RCM compliance, c UL us - Listed (OL) certification, along with CE and UKCA markings per applicable EU and UK EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a gear rack and pinion structural design, this single-acting Festo industrial component features a valve actuator size of 160, an F0710 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal angle. Operating between 0.2 MPa and 0.8 MPa with a 24 bar burst pressure, the unit incorporates an ISO 5211 standard valve connection, a 24 mm shaft connection depth, and VDI/VDE 3845 NAMUR and VDI/VDE 3845 Size AA 1 compliance for positioners and sensors. Certified to ISO 13849 and IEC 61508, the safety function utilizes spring force to switch the actuator to a defined safety position when compressed air is removed and the spring chamber is exhausted, providing safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in redundant architecture. Submit the exact part number, quantity, and application requirements to receive an official price and lead time quotation.
View product details →
Festo
This Festo industrial component, part number 8060519, is a 2/2 poppet valve featuring a diaphragm actuator and an in-line installation design that supports any mounting position with a G2 1/2 threaded sleeve connection. Externally controlled via a G1/8 pneumatic connection, it operates with a medium pressure range of 0 bar to 8 bar and handles vapor, inert gas, or filtered compressed air up to 600 mm²/s viscosity across medium temperatures from -10 °C to 180 °C. The non-reversible unit provides a flow rate Kv of 77.4 m³/h for gaseous media above the valve seat, utilizing a mechanical spring reset method and compressed air operating medium conforming to ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements for a quote.
View product details →