Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8028542 is a 3/2-way closed monostable industrial component featuring a 30 mm width and direct electrical control with a soft sealing principle. It operates at pressures from 0.2 MPa to 1 MPa (2 bar to 10 bar, 29 psi to 145 psi) with a normal nominal flow rate of 34 l/min, a mechanical spring reset, and an IP65 degree of protection conforming to ISO 15218. This sub-base valve includes a covered manual override, a non-reversible flow direction, negative overlap lap, and equal 8 ms on and off switching times up to a maximum frequency of 5 Hz. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8030623 is a single-acting industrial component featuring a kinematic yoke system with a 90-degree swivel angle and an ISO 5211 flange hole pattern of F10 or F12. Operating within a pressure range of 5.6 bar to 8.4 bar at a nominal operating pressure of 5.6 bar, this unit includes a spring force connection pressure of 5.6 bar, right-closing direction, and VDI/VDE 3845 NAMUR standard valve connection. It provides safety integrity level support up to SIL 2 in low demand mode, an un-cushioned design, a 38.5 mm shaft connection depth, and adjustable end positions spanning -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal angle. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8028541 is a directly controlled 3/2-way closed monostable industrial component featuring a 30 mm width, a soft sealing principle, and a normal nominal flow rate of 34 l/min normalized to DIN 1343. This sub-base valve conforms to ISO 15218 with an ISO 15218 30 mm pneumatic working port, operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar, 29 psi to 145 psi) and utilizing a mechanical spring reset method with an IP65 degree of protection. It supports any mounting position, features both detenting via accessory and non-detenting manual override, and achieves a maximum switching frequency of 5 Hz with 8 ms on and off switching times. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8033484 is a 2x3/2 open/closed monostable industrial component utilizing a piston gate valve structural design with a soft sealing principle and positive overlap lap. Featuring an 18 mm width, an electrical actuation type, and a normal nominal flow rate of 400 l/min, this 24V DC unit operates at pressures ranging from 0.3 MPa to 1 MPa (3 bar to 10 bar) and includes an LED signal status display alongside a covered manual override. It provides IP65 and NEMA 4 degrees of protection, holds a c UL us recognized certification, and accommodates sub-base mounting with G1/8 pneumatic working ports compatible with ISO 15407-1 and VDMA 24563 specifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8031817 is a 5/3 electrical piston gate valve featuring a 18 mm width, soft sealing principle, and a normal nominal flow rate of 370 l/min normalized to DIN 1343. Operating at 24V DC within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar), this piloted component includes an IP65 and NEMA 4 degree of protection alongside c UL us recognition (OL) issued by UL MH19482. It utilizes an ISO 15407-2 size 18 mm G1/8 pneumatic working port, mechanical spring and electrical actuation reset methods, and adjustable exhaust air function via throttle plate or individual sub-base. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8030622 is a single-acting industrial component utilizing a kinematic yoke system with a 0360 valve actuator size and a 90-degree swivel angle. It features an F10 or F12 flange hole pattern, an ISO 5211 standard valve connection, and a VDI/VDE 3845 NAMUR-conforming valve connection, operating within a pressure range of 5.6 bar to 8.4 bar. This model provides safety integrity level support up to SIL 2 in low demand mode, closes to the right without cushioning, and maintains a 29.5 mm shaft connection depth with adjustable end positions at both 0 degrees and the nominal swivel angle. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8028540 is an electrical 3/2-way closed monostable industrial component featuring a direct control type and a 30 mm width. Operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar, 29 psi to 145 psi), this sub-base valve delivers a normal nominal flow rate of 34 l/min through an ISO 15218 pneumatic working port. Built with a soft sealing principle, mechanical spring reset, and an IP65 degree of protection, the unit supports any mounting position and features both detenting and non-detenting manual overrides. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
This Festo 18 mm electrical industrial component features a 2x3/2 open monostable valve function with a piston gate valve structural design and a normal nominal flow rate of 400 l/min. Powered by a 24V DC operating voltage, it operates within a pressure range of -0.9 bar to 10 bar and provides IP65 and NEMA 4 degree of protection alongside c UL us recognition. The unit incorporates a soft sealing principle, covered manual override, LED signal status display, and adjustable exhaust air function via a throttle plate or individual sub-base. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8031816 is an electrical piston gate valve featuring a 5/3 valve function with connection 4 pressurized and 2 exhausted, built with a 26 mm width and a normal nominal flow rate of 850 l/min according to DIN 1343. This piloted component operates on 24V DC within an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and incorporates a soft sealing principle, negative overlap lap, and non-reversible flow direction. Featuring IP65 and NEMA 4 protection degrees, CSA and c UL us recognitions, and a pneumatic working port utilizing a 26 mm sub-base conforming to ISO 15407-1 with G1/4 connections, it supports any mounting position with mechanical spring and electrical reset methods. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo industrial component, part number 8030621, is a single-acting valve actuator featuring a 0240 size, a kinematic yoke system structural design, and an F10 or F12 flange hole pattern. It operates at a nominal pressure of 0.56 MPa with an operating pressure range of 0.56 MPa to 0.84 MPa, providing a 90-degree swivel angle and rightward closing direction without cushioning or position sensing. This unit includes a 29.5 mm shaft connection depth, supports safety integrity levels up to SIL 2 in low demand mode, and conforms to ISO 5211 standards for valve connection and VDI/VDE 3845 for NAMUR compatibility. Submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8028539 is a 30 mm wide, directly controlled 3/2-way closed monostable industrial component featuring a soft sealing principle and negative overlap lap. This sub-base valve conforms to ISO 15218 with an ISO 15218 pneumatic working port, offering a normal nominal flow rate of 34 l/min, an operating pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar, 29 psi to 145 psi), and a maximum switching frequency of 5 Hz with 8 ms on and off switching times. It includes electrical actuation, a mechanical spring reset method, non-detenting manual override, IP65 protection, and allows mounting in any position with a required switching frequency of at least once a week for forced dynamization. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8033482 is an electrical 18 mm piston gate valve featuring a 2x3/2 open monostable function and a normal nominal flow rate of 400 l/min normalized to DIN 1343. Operating at 24V DC within an operating pressure range of 0.3 MPa to 1 MPa (3 bar to 10 bar), this c UL us-recognized (OL) component provides IP65 and NEMA 4 degree of protection with a soft sealing principle and positive overlap lap. It includes a covered manual override, LED signal status display, adjustable exhaust air function via a throttle plate or individual sub-base, and supports both internal and external pilot air supply ports. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo 8031815 industrial component is an 18 mm wide electrical piston gate valve featuring a 5/3 function with a negative overlap lap and soft sealing principle. It operates on 24V DC with a normal nominal flow rate of 380 l/min, supporting an operating pressure range of -0.9 bar to 10 bar and providing IP65 and NEMA 4 protection. The unit includes a piloted control mechanism with external pilot air supply, adjustable exhaust air function, detenting and non-detenting manual override, and an LED signal status display. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8030620 is an industrial component featuring an 0180 valve actuator size, a kinematic yoke structure, and a single-acting mode of operation with a nominal operating pressure of 0.56 MPa. This unit provides a 90-degree swivel angle via an ISO 5211 flange hole pattern of F07 or F10, supporting operating pressures from 5.6 bar to 8.4 bar and safety integrity levels up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
This Festo industrial component, part number 8028501, features a high-alloy steel slot nut construction with a product weight of 1 g and a pack size of 100. It is built to withstand an ambient temperature range of -40 °C to 150 °C, exhibits a corrosion resistance class (CRC) of 2 for moderate corrosion stress, and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards with RoHS-compliant materials. The part supports any mounting position for integration into your assembly. Request a quote today by submitting this exact part number, required quantity, and your application parameters.
View product details →
Festo
The Festo part number 8028500 is an industrial component featuring a high-alloy steel slot nut design with a product weight of 1 g and a pack size of 2. It supports any mounting position, operates within an ambient temperature range of -40 °C to 150 °C, and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards with a corrosion resistance class (CRC) of 2 for moderate corrosion stress. Materials are RoHS compliant as noted in the specifications. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8033481 is a monostable, 2x3/2 closed electrical industrial component featuring a piston gate valve structural design and an 18 mm width. It delivers a normal nominal flow rate of 400 l/min with a soft sealing principle, positive overlap, and a reversible-only flow direction, operating at 24V DC within an operating pressure range of -0.9 bar to 10 bar. Certified as c UL us - recognized (OL) with an IP65 and NEMA 4 degree of protection, the unit includes an LED signal status display, covered manual override, and supports adjustable exhaust air function via throttle plate or individual sub-base. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo 8031814 is a 5/3 exhausted electrical industrial component featuring an 18 mm width, a piston gate valve structural design, and a soft sealing principle. It operates at 24V DC with an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and delivers a normal nominal flow rate of 380 l/min through a G1/8 or size 18 mm ISO 15407-1 sub-base pneumatic working port. Equipped with IP65 and NEMA 4 degree of protection, a 5 mm nominal width, a positive overlap lap, and an LED signal status display, this piloted valve utilizes mechanical spring and electrical actuation with a non-reversible flow direction. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 8030619 is a single-acting industrial component utilizing a kinematic yoke system with a 90-degree swivel angle and F07 or F10 flange hole patterns. Designed with an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR compliance, this actuator features a nominal operating pressure of 0.56 MPa, an operating pressure range of 0.56 MPa to 0.84 MPa, and safety integrity level up to SIL 2 low demand mode. It includes a 24.8 mm shaft connection depth, adjustable end positions ranging from -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal swivel angle, and a spring force connection pressure of 0.56 MPa without cushioning or position sensing. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo VAMC-B10-20-CH2 cover cap is an industrial component featuring a POM cover cap material and a product weight of 0.32 g. This part maintains a corrosion resistance class (CRC) of 2 for moderate corrosion stress and conforms to VDMA24364-B1/B2-L LABS (PWIS) requirements. Submit the exact part number, quantity, and application requirements for a quote.
View product details →