Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 549691 is a single-acting industrial component featuring a size 1920 valve actuator, an F16 flange hole pattern, and a 90-degree swivel angle utilizing a kinematic yoke system. It operates within a pressure range of 4.2 bar to 8.4 bar, achieves a maximum swivel frequency of 1 Hz at 6 bar, and provides a closing direction to the right with end-position adjustment ranges of -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal swivel angle. Conforming to ISO 5211 and VDI/VDE 3845 NAMUR standards, this unit supports SIL 2 low demand mode and carries a CE marking per the EU explosion protection directive. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 550496 is an MS-series size 4 industrial component featuring a structural design of a branching module, soft-start valve, pressure switch, on/off valve, and filter regulator with pressure gauge. It operates within a 4.5 bar to 10 bar operating pressure range, offering a 4 bar to 9 bar pressure regulation range and a normal nominal flow rate of 550 l/min using compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases. The unit includes a 5 µm filtration grade, a manual rotating condensate drain, a plastic bowl guard, and a rotary knob with detent actuator lock that can be closed with accessories. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 547332 is a 10 mm electrical 5/2-way monostable industrial component featuring a piston gate valve structural design, a soft sealing principle, and a nominal flow rate of 170 l/min. This piloted unit operates at 24V DC with an operating pressure of -0.09 MPa to 0.7 MPa, utilizing an external pilot air supply port alongside pneumatic spring reset and positive overlap lap. It includes QS-4 pneumatic working ports, an IP40 degree of protection, detenting and non-detenting manual override, and an LED signal status display for any mounting position. Submit the exact part number, quantity, and application requirements for a formal price quote.
View product details →
Festo
The Festo part number 549558 is a double-acting industrial component featuring a 50 mm piston diameter, a 50 mm stroke, and an external piston rod thread of M16x1.5 equipped with a rod clevis. This structural design includes a swivel mounting on the bearing cap, integrated flow control at both ends, and adjustable pneumatic cushioning at both ends with a 20 mm cushioning length. Operating on compressed air as per ISO 8573-1:2010 [7:4:4] within a 1 bar to 10 bar pressure range, it delivers a theoretical retracting force of 990 N at 6 bar while supporting position sensing via proximity switch in any mounting position. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 550495 is an industrial component featuring an MS series size 4 structural design that integrates an on/off valve, a filter regulator with a pressure gauge, and a standard mist lubricator. This assembly operates within a pressure range of 4.5 bar to 10 bar, providing a regulation range of 4 bar to 9 bar and a normal nominal flow rate of 700 l/min utilizing compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases. Equipped with a 5 µm filtration grade, a manual rotating condensate drain, a plastic bowl guard, and a rotary knob actuator lock with detent, the unit functions with constant output pressure, primary pressure compensation, secondary exhausting, and return flow characteristics. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 547331 is an electrical 3/2-way monostable open industrial component utilizing a piston gate valve structural design with a soft sealing principle and positive overlap lap. This 10 mm unit features a normalized nominal flow rate of 170 l/min according to DIN 1343, a QS-4 pneumatic working port, an operating voltage of 24V DC, and an operating pressure range of -0.09 MPa to 0.7 MPa (-0.9 bar to 7 bar). It is equipped with piloted control, external pilot air supply port, pneumatic spring reset method, non-throttled exhaust air function, non-reversible flow direction, IP40 degree of protection, LED signal status display, and detenting or non-detenting manual override for an external pilot pressure of 0.3 MPa to 0.7 MPa in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549690 is a single-acting industrial component featuring a size 1920 valve actuator, an F16 flange hole pattern, and a structural kinematic yoke system with a 90-degree swivel angle. Operating within a pressure range of 0.35 MPa to 0.84 MPa and a spring force connection pressure of 0.35 MPa, this unit includes a 49 mm shaft connection depth, VDI/VDE 3845 NAMUR valve connection compliance, ISO 5211 standard connection, and ATEX EU explosion protection directive CE marking up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This double-acting industrial component from Festo features a 50 mm piston diameter, a 150 mm stroke, and an M16x1.5 piston rod thread with an integrated rod clevis. Built with a swivel mounting on the bearing cap, it operates on compressed air meeting ISO 8573-1:2010 [7:4:4] standards within a pressure range of 1 bar to 10 bar. The unit includes adjustable pneumatic cushioning at both ends with a 20 mm cushioning length, integrated flow control at both ends, and an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 550494, is a size 4 MS series assembly featuring an on/off valve, a filter regulator with a pressure gauge, and a standard mist lubricator with a 40 µm filtration grade and fully automatic condensate drain. It operates at 4.5 bar to 10 bar with a pressure regulation range of 4 bar to 9 bar, providing a normal nominal flow rate of 550 l/min utilizing 24 V DC 1.8 W coil characteristics and compressed air or inert gases. The unit incorporates a rotary knob actuator lock with detent, a plastic bowl guard, constant output pressure controller functions with primary pressure compensation, secondary exhausting, and return flow characteristics. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 547330 is a 10 mm electrical piston gate valve featuring a 3/2-way, closed, monostable function with a piloted type of control and external pilot air supply port. Operating at 24V DC with an operating pressure range of -0.09 MPa to 0.7 MPa and a nominal flow rate of 170 l/min, this component includes a soft sealing principle, positive overlap, pneumatic spring reset, and integrated LED signal status display. Features comprise detenting and non-detenting manual override, non-reversible flow direction, non-throttleable exhaust air, an IP40 protection rating, and any mounting position compatibility. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Engineered with a 50 mm piston diameter and a 125 mm stroke, this double-acting Festo industrial component operates between 1 bar and 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. The unit features adjustable pneumatic cushioning at both ends with a 20 mm cushioning length, integrated flow control at both ends, a piston rod end with an external thread and rod clevis, and a swivel mounting on the bearing cap yielding a retracting theoretical force of 990 N at 6 bar. Suitable for any mounting position within an ambient temperature range of -10 °C to 60 °C, part number 549556 accommodates oil lubrication if required for further use. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549689 is a single-acting industrial component featuring a size 1920 valve actuator with an F16 flange hole pattern and a kinematic yoke system structural design. Operating within a pressure range of 2.8 bar to 8.4 bar at a nominal operating pressure of 5.6 bar, this unit delivers a 90-degree swivel angle that closes to the right, supported by an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR compliance. It includes an un-cushioned design with no position sensing, an ATEX-compliant CE marking, safety integrity level (SIL) up to SIL 2 low demand mode, and adjustable end-positions spanning -5 degrees to 5 degrees at 0 degrees and 85 degrees to 95 degrees at the nominal angle. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 550493 is a size 4 industrial component from the MS series featuring a structural design that integrates a branching module, soft-start valve, pressure switch, on/off valve, filter regulator with a pressure gauge, and standard mist lubricator. It operates within a pressure range of 4.5 bar to 10 bar, provides a pressure regulation range of 4 bar to 9 bar, and delivers a normal nominal flow rate of 750 l/min utilizing a 24 V DC, 1.8 W coil. This unit incorporates a 40 µm grade of filtration, a fully automatic condensate drain, a plastic bowl guard, and a rotary knob actuator lock with detent that can be closed with accessories. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 547329 is a 2/2-way closed monostable industrial component featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle with positive overlap lap. Operating on 24V DC with an electrical actuation type and piloted control, this unit delivers a normal nominal flow rate of 150 l/min across an operating pressure range of -0.09 MPa to 0.7 MPa. It is equipped with QS-4 pneumatic working ports, an external pilot air supply port accepting pilot pressures from 0.3 MPa to 0.7 MPa, pneumatic spring reset, a non-throttled exhaust air function, detenting or non-detenting manual override, an LED signal status display, and an IP40 degree of protection for mounting in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 549555 is a double-acting industrial component featuring a 50 mm piston diameter and a 100 mm stroke, operating within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. This structural design incorporates an M16x1.5 external piston rod thread with a rod clevis, a 19.5 mm wide swivel mounting on the bearing cap, adjustable pneumatic cushioning at both ends, and integrated flow control at both ends for velocity regulation in any mounting position. It achieves a theoretical retracting force of 990 N at 6 bar while operating across an ambient temperature range of -10 °C to 60 °C with oil lubrication capability. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
This Festo industrial component, part number 549688, is a single-acting valve actuator featuring a size of 1440, an F16 flange hole pattern, and a kinematic yoke system with a 90-degree swivel angle. It operates at a nominal pressure of 0.56 MPa (5.6 bar) with an operating pressure range of 0.56 MPa to 0.84 MPa, provides a maximum swivel frequency of 1 Hz at 6 bar, and includes ATEX CE marking along with SIL 2 low demand mode safety integrity level compliance. The unit incorporates an un-cushioned design with a 49.5 mm shaft connection depth, ISO 5211 standard valve connection, VDI/VDE 3845 NAMUR conformity, and adjustable end-positions spanning -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal swivel angle. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 550492 is an MS series size 4 industrial component featuring a branching module, an on/off valve, and a filter regulator equipped with a pressure gauge. This unit delivers a normal nominal flow rate of 1250 l/min across an operating pressure range of 4.5 bar to 10 bar, utilizing a 40 µm filtration grade and a manual rotating condensate drain. Designed for compressed air and inert gases with 24 V DC 1.8 W coil characteristics, it incorporates constant output pressure control and secondary exhausting within a moderate corrosion stress environment (CRC 2). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 549554 is a double-acting industrial component featuring a 50 mm piston diameter, a 75 mm stroke, and an M16x1.5 piston rod thread with an external rod clevis. Built with a swivel mounting on the bearing cap and integrated flow control at both ends, this cylinder operates on compressed air within a 1 bar to 10 bar pressure range and accommodates adjustable pneumatic cushioning at both ends. It functions across an ambient temperature range of -10 °C to 60 °C, delivers a theoretical retracting force of 990 N at 6 bar, and allows for optional oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 547328 is an electrical 5/2-way bistable industrial component featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle. It delivers a normal nominal flow rate of 170 l/min at an operating pressure ranging from -0.9 bar to 7 bar and requires an external pilot air supply pressure of 3 bar to 7 bar. Operating on 24V DC with an IP40 degree of protection, this piloted valve includes an LED signal status display, both detenting and non-detenting manual override, and non-throttled exhaust air. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549686 is a single-acting industrial component featuring a size 1440 valve actuator with an F16 flange hole pattern and a kinematic yoke system structural design. This unit provides a 90-degree swivel angle with an end-position adjusting range of -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal swivel angle, operating at a nominal pressure of 0.56 MPa within an operating pressure range of 0.35 MPa to 0.84 MPa. Conforming to ISO 5211 and VDI/VDE 3845 (NAMUR) standards, it includes ATEX CE marking and safety integrity level up to SIL 2 low demand mode while lacking cushioning and position sensing. Submit the exact part number, quantity, and application requirements for a quote.
View product details →