Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 549548 is a double-acting industrial component featuring a 50 mm piston diameter, a 50 mm stroke, and an external M16x1.5 piston rod thread with a rod clevis. This unit operates within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4], delivering a theoretical retracting force of 990 N at 6 bar. It incorporates adjustable pneumatic cushioning at both ends with a 20 mm cushioning length, integrated flow control at both ends, a 16 mm wide rod clevis and swivel mounting on the bearing cap, and position sensing via proximity switch for installation in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 549681, is a single-acting valve actuator featuring a size 0720 structural design with a kinematic yoke system and a 90-degree swivel angle. It operates at a nominal pressure of 0.56 MPa (5.6 bar) with an operating pressure range of 0.28 MPa to 0.84 MPa (2.8 bar to 8.4 bar) and provides SIL 2 low demand mode safety integrity. The unit incorporates an ISO 5211 flange hole pattern, a VDI/VDE 3845 (NAMUR) valve connection, an un-cushioned 38.5 mm shaft connection depth, and an adjustable end-position range from -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal angle. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 547322 is a 10 mm electrical 5/2-way monostable industrial component utilizing a piston gate valve structural design with a soft sealing principle and positive overlap lap. Featuring an M5 pneumatic working port, an operating voltage of 24V DC, a normal nominal flow rate of 170 l/min, and an operating pressure range of -0.9 bar to 7 bar, this piloted unit includes external pilot air supply ports, a pneumatic spring reset method, and an IP40 degree of protection with an LED signal status display. Additional specifications include non-throttled exhaust air, non-reversible flow direction, any mounting position, and both detenting and non-detenting manual override capabilities alongside a pilot pressure range of 0.3 MPa to 0.7 MPa. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 550485 is an industrial component of the MS series, size 4, featuring a structural design that combines a branching module, an on/off valve, a filter regulator with a pressure gauge, and a standard mist lubricator. Operating within a pressure range of 4.5 bar to 10 bar, this unit provides a 40 µm filtration grade, a fully automatic condensate drain, and a normal nominal flow rate of 750 l/min normalized to DIN 1343. It incorporates a controller function with constant output pressure, primary pressure compensation, secondary exhausting, and return flow characteristic, along with a rotary knob actuator lock with detent that can be closed with accessories. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo 549547 is a double-acting industrial component featuring a 50 mm piston diameter, a 150 mm stroke, and an M16x1.5 piston rod thread with an external thread and rod clevis. Operating between 1 bar and 10 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4], it delivers a theoretical retracting force of 990 N at 6 bar and incorporates adjustable pneumatic cushioning and integrated flow control at both ends. The structural design includes a cylinder barrel, piston rod with rod clevis, and swivel mounting on the bearing cap for installation in any mounting position within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component features a 0720 actuator size with an F12 flange hole pattern, a 90-degree swivel angle, and a kinematic yoke structural design for single-acting operation closing to the right. It operates within a pressure range of 5.6 bar to 8.4 bar, offering an un-cushioned design with no position sensing and a spring force connection pressure of 5.6 bar supporting up to SIL 2 low demand mode safety integrity levels. Submit part number 549680, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component (Part Number 547321) is a 3/2-way monostable open valve featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle. It operates at 24V DC with an operating pressure range of -0.09 MPa to 0.7 MPa, a normal nominal flow rate of 170 l/min through M5 pneumatic working ports, and utilizes an external pilot air supply port with pilot pressure ranging from 0.3 MPa to 0.7 MPa. The unit includes a pneumatic spring reset method, detenting and non-detenting manual override, an LED signal status display, an IP40 degree of protection, and can be mounted in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 550484 is a size 4 industrial component from the MS series featuring a structural design that integrates a branching module, soft-start valve, pressure switch, on/off valve, and a filter regulator with a pressure gauge. This unit operates within a pressure range of 4.5 bar to 10 bar, provides a pressure regulation range of 4 bar to 9 bar, and delivers a normal nominal flow rate of 600 l/min utilizing 24 V DC 1.8 W coil characteristics. The assembly includes a 40 µm filtration grade, a manual rotating condensate drain, a plastic bowl guard, and a rotary knob actuator lock with detent that can be closed with accessories. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 549546 is a double-acting industrial component featuring a 50 mm piston diameter and a 125 mm stroke, operating within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. This structural assembly incorporates an M16x1.5 external piston rod thread with a rod clevis, a swivel mounting on the bearing cap with a 16 mm wide clevis, integrated flow control at both ends, and adjustable pneumatic cushioning at both ends. It operates in any mounting position across an ambient temperature range of -10 °C to 60 °C, delivering a theoretical retracting force of 990 N at 6 bar while accommodating a 20 mm cushioning length and 0.7 J impact energy in the end positions. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
This Festo industrial component, part number 549679, is a single-acting valve actuator featuring a size 0720 kinematic yoke system with an F12 flange hole pattern and a 90-degree swivel angle. It incorporates an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR), an un-cushioned design with no position sensing, and an adjustable end-position range of -1 to 9 degrees at 0° and 81 to 91 degrees at the nominal swivel angle. Operating within a pressure range of 4.2 to 8.4 bar (0.42 to 0.84 MPa) and a nominal operating pressure of 5.6 bar (0.56 MPa), the unit achieves a maximum swivel frequency of 1 Hz at 6 bar and supports functional safety up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
The Festo 547320 is an electrical 3/2-way closed monostable industrial component featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle. It delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports, operating at pressures ranging from -0.09 MPa to 0.7 MPa with an external pilot air supply port requiring 0.3 MPa to 0.7 MPa. Equipped with 24V DC operating voltage, an IP40 degree of protection, an LED signal status display, and both detenting and non-detenting manual override capabilities, this piloted unit utilizes a pneumatic spring reset method with a positive overlap lap and non-reversible flow direction for mounting in any position. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo 550483 is an MS-series size 4 industrial component featuring an on/off valve and a filter regulator with a pressure gauge, engineered with a 40 µm filtration grade and a manual, rotating condensate drain. It delivers a normal nominal flow rate of 700 l/min across an operating pressure range of 4.5 bar to 10 bar, utilizing a rotary knob actuator lock with detent that can be closed with accessories. Designed for vertical ±5° mounting, this unit operates with compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases, providing a pressure regulation range of 4 bar to 9 bar alongside 24 V DC, 1.8 W coil characteristics. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 549545 is a double-acting industrial component featuring a 50 mm piston diameter and a 100 mm stroke, operating within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. This structural design incorporates an external thread with a rod clevis featuring an M16x1.5 piston rod thread and a 16 mm wide rod clevis swivel mounting, alongside integrated flow control and adjustable pneumatic cushioning at both ends. It operates at an ambient temperature of -10 °C to 60 °C, delivers a theoretical retracting force of 990 N at 6 bar, and permits oil lubrication for continued use. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 549678 is a single-acting industrial valve actuator featuring a kinematic yoke system with an actuator size of 0720, an F12 flange hole pattern, and a 90-degree swivel angle. It operates at a nominal pressure of 0.56 MPa with an operating pressure range of 0.35 MPa to 0.84 MPa, a spring force connection pressure of 0.35 MPa, and supports safety integrity levels up to SIL 2 low demand mode. Designed with an un-cushioned structure, ISO 5211 valve connection, VDI/VDE 3845 NAMUR compliance, and an adjustable end-position range from -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal swivel angle, it achieves a maximum swivel frequency of 1 Hz at 6 bar while closing to the right in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 547318 is an electrical 10 mm piston gate valve featuring a 2/2-way, closed, monostable function with soft sealing and an external pilot air supply port requiring 0.3 MPa to 0.7 MPa. Operating at 24V DC, this piloted component delivers a normal nominal flow rate of 150 l/min across an operating pressure range of -0.9 bar to 7 bar with M5 pneumatic working ports and an IP40 degree of protection. Additional technical attributes include a pneumatic spring reset method, non-reversible flow direction, positive overlap lap, non-throttled exhaust air function, LED signal status display, and both detenting and non-detenting manual override options for any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549544 is a double-acting industrial component featuring a 50 mm piston diameter, a 75 mm stroke, and an M16x1.5 piston rod thread with an external thread and rod clevis. Operating between 1 bar and 10 bar on compressed air conforming to ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical retracting force of 990 N at 6 bar while utilizing adjustable pneumatic cushioning at both ends and integrated flow control. The structural design incorporates a cylinder barrel, piston, rod clevis, and a swivel mounting on the bearing cap for installation in any mounting position within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
Manufactured by Festo, part number 550482 is an industrial component featuring an angled socket electrical connection with a standard 5 m cable design of 2 x 0.35 mm² and a 24 V DC nominal operating voltage. Weighing 62.5 g, this component includes an M2 central screw for mounting on an air solenoid valve in any position, operating within an ambient temperature range of -10 °C to 50 °C and an IP40 degree of protection. It complies with EU RoHS and UK RoHS directives, maintains VDMA24364-B2-L LABS conformity, and exhibits a corrosion resistance class of 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 547317 is a 5/2-way bistable industrial component featuring an electrical actuation type, a 10 mm valve size, and a piston gate valve structural design. It delivers a normal nominal flow rate of 170 l/min through QS-4 pneumatic working ports, operating at pressures from -0.9 bar to 7 bar with a 24V DC operating voltage. Equipped with a soft sealing principle, LED signal status display, and both detenting and non-detenting manual overrides, this piloted unit functions with an external pilot air supply port and a pilot pressure range of 3 bar to 7 bar. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component features a 0720 size valve actuator with an F12 flange hole pattern, a 90-degree swivel angle, and an un-cushioned kinematic yoke structural design. Operating as a single-acting unit with a closing direction to the right, it incorporates an ISO 5211 standard valve connection conforming to VDI/VDE 3845 NAMUR specifications and supports safety integrity levels up to SIL 2 in low demand mode. The device operates within a pressure range of 2.8 bar to 8.4 bar at a nominal operating pressure of 5.6 bar, offering an end-position adjusting range from -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal swivel angle. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This double-acting industrial component from Festo features a 50 mm piston diameter and a 50 mm stroke, operating within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. The structural design includes a piston, a piston rod with an M16x1.5 external thread and rod clevis, a 16 mm wide swivel mounting on the bearing cap, and integrated flow control with adjustable pneumatic cushioning at both ends. Operating efficiently across an ambient temperature range of -10 °C to 60 °C, the unit delivers a theoretical retracting force of 990 N at 6 bar. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →