Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8118624
Guided drive DFM-12-20-P-A-GF-F1A
The Festo part number 8118624 is a double-acting industrial component featuring a 12 mm piston diameter, a 20 mm stroke, and a yoke drive unit operating mode with a 25 mm centre of gravity distance from the payload to the yoke plate. This unit operates on compressed air per ISO 8573-1:2010 [7:4:4] within a 0.2 MPa to 1 MPa pressure range, utilizing a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch. Constructed with a corrosion resistance class of CRC 0 and restricted copper, zinc, and nickel content for Li-ion battery production suitability, it functions across ambient temperatures from -20 °C to 80 °C and achieves cleanroom compatibility of ISO Class 6. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8112990
Push-in fitting NPQE-D-G14F-Q4-P10
The Festo 8112990 is a standard industrial component featuring a straight design with a nominal width of 2.5 mm, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for a 4 mm outside diameter tubing utilizing a push-pull principle. Constructed with a nickel-plated brass housing, external hexagon SW17 mounting type, and a blue releasing ring, this part operates within a pressure range of -0.95 bar to 8 bar and ambient temperatures from -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Each pack size contains 10 units, weighing 22.8 g each, with VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
8116785
Parallel gripper DHPC-16-A-S
The Festo part number 8116785 is a double-acting parallel pneumatic gripper featuring two jaws with a size 16 rating and a 3 mm stroke per jaw. This component utilizes a ball guide with a positively driven motion sequence, a lateral connection direction, and supports any mounting position with position sensing via proximity switch. It operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, or 14.5 psi to 116 psi) with a max operating frequency of 3 Hz and a minimum opening time of 29 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118623
Guided drive DFM-12-10-P-A-GF-F1A
The Festo 8118623 is a double-acting industrial component featuring a 12 mm piston diameter, a 10 mm stroke, and a yoke drive unit operating mode with a plain-bearing guide. It operates on compressed air according to ISO 8573-1:2010 [7:4:4] within a 2 bar to 10 bar operating pressure range, utilizing elastic cushioning rings or pads at both ends and accommodating position sensing via proximity switch. This guide unit achieves Class 6 cleanroom suitability per ISO 14644-1 and meets VDMA24364-B1/B2-L LABS conformity with specific copper, zinc, and nickel restrictions for battery production compatibility. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8112989
Push-in fitting NPQE-D-G18F-Q10-P10
The Festo part number 8112989 is a straight-design industrial component featuring a nominal width of 8 mm, an internal thread G1/8 pneumatic connection 1, and a connection for 10 mm outside diameter pneumatic tubing 2. Constructed with a nickel-plated brass housing and an external hexagon SW17 mounting type, this component operates within a pressure range of -0.095 MPa to 0.8 MPa and a temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers any mounting position, a push-pull structural design, a blue releasing ring, and a pack size of 10 with a unit product weight of 27.66 g. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8114564
Solenoid valve VYKA-F7-M32-12-D2-PF-5YQ7
The Festo 8114564 is a direct-controlled 3/2 monostable industrial component featuring a soft-sealing rocker valve with a diaphragm seal, a 1.2 mm nominal width, and a 7.5 mm width dimension in a size 7 frame. Engineered with FFPM and PEEK media-contact materials, this electrical actuation valve utilizes a mechanical spring reset, accommodates reversible flow with restrictions, and connects via a 2-pin socket with connection diagram Q7. It includes a flange fluid connector, lacks manual override, operates with liquid and gaseous media, and mounts in any position utilizing through-holes for M2 screws. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
8116784
Protective cap DHAS-DP-B23-10-L-N
The Festo 8116784 is an industrial component designed for a gripper, featuring a size of 10 and an 8 mm stroke. Weighing 3.7 g with an NBR protective cap, this RoHS-compliant part operates within an ambient temperature range of -10 °C to 60 °C and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) alongside VDMA24364-B2-L LABS conformity. It mounts via insertion in a slot from above. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Filtration Group
77684699
Filtration Group 77684699 — Filter Element
The Filtration Group 77684699 is an industrial filter element designated as manufacturer model FILTERELEMENT 852 149 SMX VST 10 / 77684699 | 316586, featuring a Glasfaser filter element material. This component delivers a filtration rating of 10 µm and supports a permissible differential pressure of 210 bar. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8112988
Push-in fitting NPQE-D-G18F-Q8-P10
The Festo 8112988 is a standard straight industrial component featuring a 6 mm nominal width, an internal thread G1/8 pneumatic connection 1, and a pneumatic connection 2 for an 8 mm outside diameter tubing utilizing a push-pull structural design with a blue releasing ring. Constructed with a nickel-plated brass housing and an external hexagon SW14 mounting type, this part operates at pressures from -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -5 °C to 60 °C. It offers any mounting position, a corrosion resistance class of 1, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and permits lubricated operation while weighing 16.98 g in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118600
Wall mounting kit MS4-WPE-B
The Festo part number 8118600 is an industrial component of size 4 belonging to the MS series. This product features a mounting bracket made of steel and has a product weight of 30 g with RoHS compliant materials. It is rated for a corrosion resistance class (CRC) of 2 for moderate corrosion stress and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116783
Protective cap DHAS-DP-B23-10-N
The Festo 8116783 is an industrial component designed for use with a gripper, featuring a size of 10 and a 4 mm stroke. Constructed with an NBR protective cap and RoHS-compliant materials, this 2.7 g unit operates within an ambient temperature range of -10 °C to 60 °C. It is capable of being inserted in a slot from above and meets VDMA24364-B2-L LABS conformity while being suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8114536
Fluidic muscle DMSP-10-80N-RM-CM
The Festo 8114536 is a size 10 industrial component featuring a contracting diaphragm structural design with a nominal length of 80 mm and a stroke ranging from 0 mm to 20 mm. Operating single-acting in a pulling mode with compressed air up to 0.8 MPa, this TÜV-certified part delivers a maximum contraction of 25 percent of its nominal length alongside a maximum additional freely suspended load of 30 kg. It maintains a cyclic muscle repetition accuracy of 1 percent or less of the nominal length within an ambient temperature range of -5 °C to 60 °C and exhibits a moderate corrosion resistance class of 2. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118599
Wall mounting kit MS6-WPE-B
The Festo 8118599 is an industrial component belonging to the MS series in size 6, weighing 58 g with a steel mounting bracket. This RoHS-compliant part features a corrosion resistance class of CRC 1 for low corrosion stress and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8112987
Push-in fitting NPQE-D-G18F-Q6-P10
This Festo industrial component, part number 8112987, features a straight design with a nominal width of 4.5 mm, an internal thread G1/8 pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing. Constructed with a nickel-plated brass housing, an external hexagon SW14 mounting type, and a blue releasing ring, this standard-sized unit supports any mounting position and operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4]. The component weighs 15.67 g, exhibits a corrosion resistance class of 1, meets VDMA24364 Zone III LABS conformity, and achieves ISO Class 4 cleanroom suitability according to ISO 14644-1. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116782
Parallel gripper DHPC-L-10-A-NC-S-2
The Festo part number 8116782 is a single-acting, closed pneumatic parallel gripper featuring two jaws with a size 10 designation and a 4 mm stroke per jaw. This component operates at pressures ranging from 0.35 MPa to 0.8 MPa (3.5 bar to 8 bar, or 50.75 psi to 116 psi) with a maximum operating frequency of 3 Hz and a minimum opening time of 25 ms at 6 bar. It incorporates a ball guide, zero angular play and backlash, 0.2 mm rotational symmetry, 0.2 mm maximum interchangeability, and a repetition accuracy of 0.02 mm, while utilizing a lever structural design with a lateral connection direction and flat mounting type for gripper fingers. Position sensing is achieved via proximity switch, and the unit includes a gripping force backup during closing for any mounting position under specific metal restriction variants. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8114534
Fluidic muscle DMSP-20-100N-RM-CM
The Festo part number 8114534 is a contracting diaphragm industrial component featuring a size 20 designation, a nominal length of 100 mm, and a stroke range of 0 mm to 25 mm with a maximum contraction of 25 percent of the nominal length. Operating in a single-acting pulling mode at pressures from 0 bar to 6 bar using compressed air conforming to ISO 8573-1:2010 [7:-:-], this TÜV-certified unit supports a maximum additional freely suspended load of 80 kg within an ambient temperature range of -5 °C to 60 °C. It provides a muscle repetition accuracy of ≤ 1 percent of the nominal length and exhibits moderate corrosion stress resistance under CRC 2 alongside VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8118457
Control system CMCB-D1-C-S0
Engineered with a mounting plate structural design measuring 135 mm x 254 mm x 375 mm, this Festo industrial component operates on a nominal AC voltage of 230 V across TT, TN, and IT mains types at 50 Hz to 60 Hz. The unit features an internal electronic fuse providing short-circuit protection, a maximum current consumption of 1.1 A, a secondary circuit current consumption of 5 A, and a maximum power supply of 6 A with Category B, performance level b capabilities. Designed exclusively for interior industrial applications where radio interference suppression measures may be required in residential areas, it complies with the EU EMC and low voltage directives. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8112986
Push-in fitting NPQE-D-G18F-Q4-P10
The Festo 8112986 is a standard straight industrial component featuring a 2.5 mm nominal width and a push-pull structural design utilizing a G1/8 internal thread for pneumatic connection 1 and an external hexagon SW14 mounting type. Nickel-plated brass housing construction supports an operating pressure range of -0.095 MPa to 0.8 MPa for compressed air media in accordance with ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. This pack of 10 components weighs 13.92 g each, includes a blue releasing ring, and conforms to VDMA24364 Zone III LABS requirements with ISO 14644-1 Class 4 cleanroom suitability. Submit part number 8112986, quantity, and application requirements to request a quote.
View product details →
Festo
8116781
Parallel gripper DHPC-L-10-A-NC-S-1
The Festo 8116781 is a pneumatic industrial component featuring a size 10 parallel gripper function with two gripper jaws and a 4 mm stroke per jaw. This single-acting, closed-mode device incorporates a ball guide with zero max gripper jaw angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and an operating frequency up to 3 Hz within a pressure range of 3.5 bar to 8 bar. Position sensing is accomplished via proximity switch, and the unit supports any mounting position with a minimum opening time of 25 ms at 6 bar. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8114532
Fluidic muscle DMSP-5-50N-RM-CM
The Festo part number 8114532 is a single-acting contracting diaphragm industrial component featuring a nominal length of 50 mm, a size 5 designation, and a stroke range from 0 mm to 12.5 mm. Operating at pressures up to 0.6 MPa (6 bar) with compressed air conforming to ISO 8573-1:2010 [7:-:-], this TÜV-certified unit delivers a maximum contraction of 20% of its nominal length with a 12 mm diameter expansion. It supports any mounting position, a maximum additional freely suspended load of 5 kg, and an ambient temperature range of -5 °C to 60 °C while maintaining a cyclic muscle repetition accuracy of 1% or less of the nominal length. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →