Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
Engineered with a round inductive design adhering to EN 60947-5-2 standards, this Festo industrial component delivers a 10 mm rated operating distance and an 8.1 mm assured operating distance with 0.3 mm repetition accuracy. The unit features a 2-wire non-contacting switching output with a normally open contact function, supporting a maximum DC switching frequency of 200 Hz, an AC switching frequency of 25 Hz, and a maximum output current of 300 mA across an ambient temperature range of -25 °C to 85 °C. Certified with RCM compliance, c UL us listing, alongside CE and UKCA markings, the hardware operates without short-circuit protection and requires a minimum load current of 5 mA. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo part number 5394671 is a size 64 Series P filter regulator featuring a structural design without a pressure gauge, a G1/4 setup for a pressure gauge, and a regulating screw with a locknut actuator lock. This component operates within a pressure range of 1 bar to 20 bar and a pressure regulation range of 0.5 bar to 7 bar, delivering a max standard flow rate of 3980 l/min and a normal nominal flow rate of 3320 l/min. It is designed for vertical ±5° mounting, incorporates a manual rotating condensate drain with a max condensate volume of 30 cm³, and provides 40 µm filtration for compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases with possible oil lubrication. Featuring primary pressure compensation, secondary exhausting, a max pressure hysteresis of 0.2 bar, ATEX certification for Zones 1, 2, 21, and 22, VDMA24364 Zone III LABS conformity, and NACE MR0175/ISO 15156 housing and bowl compliance, this industrial component is ready for integration. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
This Festo industrial component (Part Number 539065) is a black pneumatic tubing with a 16 mm outside diameter and a 12 mm inside diameter, weighing 0.082 kg/m. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water, featuring a temperature-dependent operating pressure of -0.095 MPa to 1.4 MPa (-0.95 bar to 14 bar, -13.775 psi to 203 psi) and a minimum bending radius of 55 mm. The RoHS-compliant tubing holds TÜV certification (certificate B 013277 0527 00), VDMA24364-B2-L LABS conformity, and functions within an ambient temperature range of -30 °C to 80 °C. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 540172 is an industrial component featuring a 26 mm width and a die-cast aluminum housing built to ISO 15407-2 norms. It operates at pressures up to 1 MPa or 10 bar using compressed air meeting ISO 8573-1:2010 [7:4:4] standards, supports any mounting position via vertical stacking on manifold or individual sub-bases, and provides IP65 and NEMA 4 degrees of protection. This unit weighs 191 g, functions within an ambient temperature range of -5 °C to 50 °C, and complies with EU low voltage and UK electrical equipment directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 538286 is a round inductive industrial component featuring a rated operating distance of 15 mm, an assured operating distance of 12.15 mm, and conformity to standard EN 60947-5-2. It utilizes a non-contact 2-wire switching output with an N/C contact, accommodating an operating voltage range of 20 V to 265 V AC, a maximum AC switching frequency of 25 Hz, a maximum DC switching frequency of 220 Hz, and a maximum output current of 300 mA within an ambient temperature range of -25 °C to 85 °C. Certification includes the RCM compliance mark, c UL us - Listed (OL) status, and CE marking in accordance with EU EMC and low voltage directives. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 5394670 is a size 64 Series P filter regulator featuring a structural design without a pressure gauge, a G1/4 port setup for pressure gauges, and a regulating screw with locknut actuator lock. Operating with compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases, it provides a pressure regulation range of 0.5 bar to 12 bar at an operating pressure between 1 bar and 20 bar, delivering a max standard flow rate of 2400 l/min and a normal nominal flow rate of 1920 l/min. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22, the unit incorporates primary pressure compensation, secondary exhausting, a 5 µm filtration grade, and a manual rotating condensate drain with a max volume of 30 cm³ within a NACE MR0175/ISO 15156 compliant housing and bowl. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 539064 is an industrial component featuring a 16 mm outside diameter, a 12 mm inside diameter, and a native color finish, weighing 0.082 kg/m with RoHS-compliant pneumatic tubing material. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] or liquid water, supporting a temperature-dependent operating pressure from -0.095 MPa to 1.4 MPa and water up to 0.8 MPa at 0 to 50 °C within an ambient temperature range of -30 °C to 80 °C. This TÜV-certified component holds certificate B 013277 0527 00, features VDMA24364-B2-L LABS conformity, and connects via a 16 mm outside diameter plug connection with a 55 mm minimum bending radius and a 95 mm bending radius relevant for flow rate. Please submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 540171 is an industrial component housed in die-cast aluminum with a width of 26 mm and a product weight of 191 g, built in accordance with the ISO 15407-2 norm. It operates at a maximum pressure of 1 MPa or 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] for both operating and pilot media, supporting optional or subsequently required oil lubrication within an ambient temperature range of -5 °C to 50 °C. Featuring IP65 and NEMA 4 degrees of protection, a corrosion resistance class of CRC 0, and VDMA24364-B1/B2-L LABS conformity, this unit mounts vertically on either a manifold sub-base or an individual sub-base in any position while carrying CE and UKCA markings for electrical equipment. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Manufactured by Festo, this round inductive industrial component with part number 538285 conforms to EN 60947-5-2 and features a rated operating distance of 15 mm with an assured operating distance of 12.15 mm. The unit operates within a temperature range of -25 °C to 85 °C and supports an AC operating voltage range of 20 V to 265 V utilizing a non-contact, 2-wire N/C contact switching output. Certifications include RCM compliance and c UL us - Listed (OL) ratings, alongside CE marking as per the EU EMC and low voltage directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 540170 is a 26 mm industrial component compliant with ISO 15407-2 and designed with an operating pressure of 1 MPa or 10 bar. It provides a constant output pressure with secondary exhausting, featuring a pressure regulation range of 0.05 MPa to 0.85 MPa (0.5 bar to 8.5 bar, or 7.25 psi to 123.25 psi) and an inlet pressure range of 0.5 bar to 10 bar. Weighing 692 g with an IP65 and NEMA 4 degree of protection, this unit operates in ambient temperatures from -5 °C to 50 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 538284 is an inductive round industrial component conforming to EN 60947-5-2 with a 15 mm rated operating distance and 12.15 mm assured operating distance. It features a non-contacting 2-wire N.O. contact switching output with a maximum DC switching frequency of 220 Hz, maximum AC switching frequency of 25 Hz, and maximum output current of 300 mA. The unit carries RCM compliance, c UL us listing, CE marking per EU EMC and low voltage directives, and UKCA marking for EMC and electrical equipment. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 5394669 is an industrial size 64 series P filter regulator featuring a regulating screw with locknut, a manual rotating condensate drain, and a 5 µm filtration grade housed in a design conforming to NACE MR0175/ISO 15156. Operating with compressed air per ISO 8573-1:2010 [-:4:-] or inert gases within a 1 bar to 20 bar pressure range, this unit delivers a maximum standard flow rate of 2410 l/min and incorporates primary pressure compensation with secondary exhausting. Certified for ATEX Zone 1, 2, 21, and 22 environments, the component supports oil lubrication operation and is set up for a G1/4 pressure gauge while maintaining a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Festo part number 539052 is an industrial component based on norm EN 61076-2-104 with wire colors and connection numbers conforming to standards EN 60947-5-2, EN 61076-2-101, and EN 61076-2-104. It features ATEX explosion prevention and protection for Zone 2 and Zone 22, a green LED for ready status indication, and a yellow LED for switching status indication applicable to NPN and PNP N/O contacts. The product weight ranges from 22 g to 835 g with multiple options for electrical connections, cable designations, and mounting types. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 540169 is an industrial component measuring 18 mm in width with a product weight of 611 g, built in accordance with ISO 15407-2 and featuring IP65 and NEMA 4 degrees of protection. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] at an operating pressure of 1 MPa (10 bar) and inlet pressure ranging from 0.5 bar to 10 bar, while delivering a constant output pressure with secondary exhausting across a regulation range of 0.05 MPa to 0.85 MPa (0.5 bar to 8.5 bar, or 7.25 psi to 123.25 psi). The unit functions in any mounting position within an ambient temperature range of -5 °C to 50 °C, carries CE and UKCA markings, features a CRC of 0, and permits oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 538283 is an inductive, round industrial component with a rated operating distance of 15 mm and an assured operating distance of 12.15 mm. Conforming to EN 60947-5-2, it features a non-contacting 2-wire switching output with a N.O. contact, a maximum DC switching frequency of 220 Hz, and a maximum AC switching frequency of 25 Hz. This unit operates within an ambient temperature range of -25 °C to 85 °C and carries RCM compliance, c UL us listing, along with applicable CE and UKCA markings. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 5394668 is a Size 64 Series P filter regulator without a pressure gauge, featuring a regulating screw with locknut and a manual rotating condensate drain with a maximum condensate volume of 30 cm³. Designed for a vertical ±5° mounting position, it operates at pressures from 1 bar to 20 bar with a regulation range of 0.5 bar to 12 bar, a max pressure hysteresis of 0.2 bar, and a max standard flow rate of 3990 l/min. The unit provides primary pressure compensation and secondary exhausting for compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases, while its housing and bowl conform to NACE MR0175/ISO 15156 standards and offer ATEX Zone 1, 2, 21, and 22 explosion protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 538999, features a black polyamide housing with an IP67 degree of protection and operates within an ambient temperature range of -40 °C to 85 °C. The electrical connection utilizes a 5-pin straight plug with a screw terminal, accommodating a connection cross section of 0.75 mm² and an approved cable diameter of 6 mm to 8 mm at a 3 A current rating, while the materials are RoHS compliant. Request a quote for this part today by submitting the exact part number, required quantity, and application specifications.
View product details →
Festo
The Festo part number 540168 is a 26 mm industrial component built on the ISO 15407-2 norm featuring constant output pressure with secondary exhausting and an operating pressure of 0.6 MPa or 6 bar. This device supports a pressure regulation range of 0.05 MPa to 0.6 MPa (0.5 bar to 6 bar, or 7.25 psi to 87 psi) with an inlet pressure 1 ranging from 0.5 bar to 10 bar. Designed with an IP65 and NEMA 4 degree of protection, it operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 50 °C, weighing a total of 692 g. Submit the exact part number, quantity, and application requirements to receive an official quote for this component.
View product details →
Festo
The Festo 538282 is a round inductive industrial component conforming to EN 60947-5-2 with a rated operating distance of 5 mm and an assured operating distance of 4.05 mm. Featuring a 2-wire non-contact switching output with an N/C contact function, this component operates across an AC voltage range of 20 V to 265 V with a maximum output current of 300 mA and repetition accuracy of 0.15 mm. Certifications include RCM compliance and c UL us-listed (OL) status, along with CE marking in accordance with EU EMC and low voltage directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 5394667 is a Series P size 64 industrial component featuring a structural design as a filter regulator without a pressure gauge, incorporating a 40 µm filtration grade and a manual rotating condensate drain with a maximum condensate volume of 30 cm³. This unit provides an operating pressure range of 1 bar to 20 bar, a pressure regulation range of 0.5 bar to 7 bar, primary pressure compensation, secondary exhausting, and a maximum standard flow rate of 3980 l/min for compressed air as per ISO 8573-1:2010 [-:4:-] or inert gases. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 with a housing and bowl conforming to NACE MR0175/ISO 15156, it operates within a vertical ±5° mounting position and accommodates oil lubrication. Submit the exact part number, quantity, and application requirements for a quote.
View product details →