Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 531289 is an MS-series size 6 filter regulator featuring a structural design with an integrated pressure gauge, a 5 µm filtration grade, and a 75% degree of condensate separation. It operates within a pressure range of 2 bar to 12 bar, provides a normal nominal flow rate of 3500 l/min, and incorporates a fully automatic and manual non-detenting condensate drain with a 38 ml max condensate volume. Designed with a constant output pressure controller function, secondary exhausting, and a rotary knob actuator lock with detent, this component is rated for moderate corrosion stress and operates with compressed air or inert gases. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 532319 is a double-acting industrial component featuring a 40 mm piston diameter, a stroke range from 25 mm to 400 mm, and a yoke drive unit operating mode. This guide structural design incorporates either a plain-bearing guide or recirculating ball bearing, adjustable pneumatic cushioning at both ends, elastic cushioning rings or pads at both ends, and a pneumatic shock absorber with a soft characteristic curve. Certified for hazardous locations under ATEX and UKCA directives with Zone 1 and Zone 2 gas explosion protection, the unit operates within a 1.5 bar to 10 bar pressure range using compressed air according to ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 533005 is a 5/3-way pressurized electrical industrial component featuring a piston gate valve design with a soft sealing principle and a nominal width of 8 mm. This 42 mm wide unit operates on 24V DC within an operating pressure range of 3 bar to 10 bar, delivering a normal nominal flow rate of 1200 l/min through an ISO 5599-1 size 1 or G1/4 sub-base pneumatic working port. Equipped with mechanical spring reset, internal pilot air supply, adjustable exhaust air function, and IP65 protection, it conforms to ISO 5599-1 standards and includes a non-detenting manual override for versatile mounting positions. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 531288 is an MS-series size 6 filter regulator featuring a structural design with an integrated pressure gauge, constant output pressure with secondary exhausting, and a 5 µm grade of filtration. Operating within a pressure range of 2 bar to 12 bar and a regulation range of 0.5 bar to 12 bar, this component supports a normal nominal flow rate of 4000 l/min for compressed air as per ISO 8573-1:2010 [7:4:-] and inert gases. It includes a 38 ml plastic bowl guard, a fully automatic and manual non-detenting condensate drain with 75% separation degree, a rotary knob actuator lock with detent that can be closed with accessories, and a vertical ±5° mounting position rated for CRC 2 moderate corrosion stress. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 532318 is a double-acting industrial drive unit featuring a 32 mm piston diameter and a variable stroke ranging from 20 mm to 400 mm. This structural guide operates at pressures between 0.15 MPa and 1 MPa utilizing compressed air as per ISO 8573-1:2010 [7:4:4], and includes adjustable pneumatic cushioning alongside position sensing via proximity switch. Certified for Zone 1 and Zone 2 explosive atmospheres with ATEX category II 2G and Ex h IIC T4 Gb ignition protection, this unit supports ambient temperatures from -20°C to +70°C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 531287 is an MS-series size 6 filter regulator featuring a structural design with an integrated pressure gauge, constant output pressure with secondary exhausting, and a pressure regulation range of 0.5 bar to 12 bar across an operating pressure of 2 bar to 12 bar. It provides a 5 µm grade of filtration, 75% condensate separation degree, 38 ml maximum condensate volume, and dual fully automatic and manual non-detenting condensate drains within a plastic bowl guard. Built with a rotary knob actuator lock with detent that can be closed with accessories, it achieves a normal nominal flow rate of 2200 l/min for compressed air as per ISO 8573-1:2010 [7:4:-] or inert gases in a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo active carbon filter cartridge MS4/D-MINI-LFX is an industrial component featuring a mini size and Series D construction. This unit utilizes activated carbon for the compressed air filter material and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards according to the official Festo data sheet. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 532317 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a stroke length ranging from 20 mm to 400 mm, and a yoke operating mode with any mounting position. It incorporates elastic cushioning rings, adjustable pneumatic cushioning, and a soft characteristic curve pneumatic shock absorber at both ends, alongside plain-bearing or recirculating ball bearing guides and position sensing via proximity switch. Certified for ATEX Zone 1 and Zone 2 hazardous areas with II 2G gas protection under ambient temperatures from -20°C to +70°C, this unit operates between 0.15 MPa and 1 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo active carbon filter cartridge MS6-LFX is an industrial component featuring size 6 within the MS series and utilizes activated carbon as the compressed air filter material. This part conforms to LABS (PWIS) VDMA24364-B1/B2-L specifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 532316 is a double-acting industrial guide drive unit with a 20 mm piston diameter and a stroke range from 20 mm to 400 mm, featuring a yoke operating mode and structural design guidance with plain-bearing or recirculating ball bearing options. This component operates at pressures between 0.2 MPa and 1 MPa (2 bar to 10 bar) using compressed air as per ISO 8573-1:2010 [7:4:4], and includes adjustable pneumatic cushioning, elastic cushioning rings, or soft characteristic pneumatic shock absorbers at both ends alongside position sensing via proximity switch. Certified with CE and UKCA markings for ATEX Zone 1 and Zone 2 gas environments (II 2G, Ex h IIC T4 Gb) within an explosive ambient temperature range of -20°C to +70°C, the unit offers corrosion resistance classes of CRC 0 or CRC 2 with variants supporting heat-resistant seals up to 120°C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo MS6-LFM-B fine filter cartridge is an industrial component categorized under Size 6 of the MS series with a grade of filtration of 1 µm. This unit maintains VDMA24364-B1/B2-L LABS (PWIS) conformity according to official Festo documentation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 531641 is an industrial component featuring a 7.4 mm nominal width, a 9 mm barbed hose fitting for pneumatic connection 1, and an operating pressure range of -0.095 MPa to 1.2 MPa. Constructed with a nickel-plated brass housing, NBR seals, and high-alloy stainless steel springs, circlips, pins, and valve bodies, this 57 g unit delivers a normal nominal flow rate from 810 l/min to 1152 l/min and an ISO 8778 standardized flow rate from 878 l/min to 1248.8 l/min using compressed air according to ISO 8573-1:2010 [7:-:-]. It operates within an ambient temperature range of -10 °C to 60 °C, supports lubricated operation, and complies with RoHS and VDMA24364-B1/B2-L LABS conformity standards with a corrosion resistance class of 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 532909 is an industrial component from the MS series, size 6, built in accordance with ISO 12500-1 and ISO 12500-3 norms for compressed air and inert gases. It features a 0.01 µm grade of filtration, a residual oil content of 0.01 mg/m³, an MPPS of 0.05 µm with a 99.95% MPPS filter efficiency, and a fractional efficiency of 99.995% for 0.1 to 0.5 µm particles. Operating with a maximum standard flow rate of 900 l/min and a minimum standard flow rate of 135 l/min, it delivers an output air quality class of ISO 8573-1:2010 [3:-:2] from an input medium of ISO 8573-1:2010 [6:-:4] while conforming to VDMA24364-B1/B2-L LABS (PWIS). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 532307 is an industrial component of size 6 from the MS series featuring a rotary knob actuator lock with an integrated lock and electrical, manual, and pneumatic actuation types. This assembly supports a vertical ±5° mounting position, an operating pressure of 1.5 bar to 20 bar, a pressure regulation range of 0.3 bar to 12 bar, and a normal nominal flow rate ranging from 1700 l/min to 4800 l/min normalized to DIN 1343. It incorporates a filtration grade of 0.01 µm to 40 µm, constant output pressure controller functions with primary pressure compensation, secondary exhausting, and return flow characteristics, alongside coil characteristics of 110 V AC at 50/60 Hz with an initial power of 3.0 VA and holding power of 2.4 VA. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 531640 is an industrial component featuring a 7.4 mm nominal width and an operating pressure range of -0.095 MPa to 1.2 MPa. This unit supports a normal nominal flow rate from 261 l/min to 1116 l/min and operates with compressed air according to ISO 8573-1:2010 [7:-:-], with lubricated operation possible within an ambient temperature of -10 °C to 60 °C. Constructed with a nickel-plated brass housing, brass inner raceway and valve body, an anodized wrought aluminum alloy union nut, NBR seals, and high-alloy stainless steel springs, pins, circlips, and barbed fitting connections for 9 mm inside diameter tubing, the assembly weighs 71 g and meets RoHS and VDMA24364-B1/B2-L LABS conformity standards with a CRC rating of 1. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 531283 is an industrial size 6 filter regulator from the MS series featuring a rotary knob actuator lock with detent and a pressure gauge. It operates with a compressed air or inert gas pressure range of 0.8 bar to 20 bar, delivering a regulation range of 0.5 bar to 12 bar and a normal nominal flow rate of 3500 l/min. Designed for vertical installation within ±5°, the unit includes a 5 µm filtration grade, a manual rotating condensate drain with a 38 ml maximum volume, and a constant output pressure function with secondary exhausting. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo 532908 is a double-acting industrial component featuring a 100 mm piston diameter, a 500 mm stroke, and an M20x1,5 male piston rod thread adhering to the ISO 15552 standard. Operating within a 0.6 to 12 bar pressure range on ISO 8573-1:2010 [7:4:4] compressed air, this profile barrel unit generates theoretical forces of 4,712 N on the advance stroke and 4,418 N on the return stroke at 6 bar. It incorporates adjustable pneumatic cushioning at both ends with a 32 mm cushioning length, position detection for proximity sensors, and a CRC 2 corrosion resistance classification for ambient temperatures between -20 and 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this Festo component.
View product details →
Festo
The Festo part number 532306 is an industrial component of the MS series, size 4, featuring a structural design that encompasses a branching module, activated carbon filter, pressure regulator with pressure gauge, soft-start valve, on/off valve, fiber filter, filter regulator with and without pressure gauge, membrane dryer, proportional standard oil mist lubricator, sinter filter with centrifugal separator, and check function. It supports electrical, manual, and pneumatic actuation with a rotary knob actuator lock having an integrated lock, operates within a pressure range of 1.5 bar to 14 bar, and provides a regulation range of 0.3 bar to 14 bar with a normal nominal flow rate of 800 l/min to 1400 l/min normalized to DIN 1343. This unit features a plastic bowl guard, visual or sensor-based differential pressure display, pressure gauge or sensor, fully automatic, manual rotating, or semiautomatic condensate drain, and a filtration grade of 0.01 µm to 40 µm. Submit the exact part number, quantity, and application requirements to receive an accurate quotation for this component.
View product details →
Festo
The Festo 531639 is an industrial component featuring a nominal width of 4.9 mm and an operating pressure range of -0.095 MPa to 1.2 MPa for compressed air operation according to ISO 8573-1:2010 [7:-:-]. Constructed with a nickel-plated brass housing, NBR seals, and a wrought aluminum alloy anodized union nut, this 63 g part accommodates an 8 mm pneumatic tubing outside diameter or a barbed fitting with a 6 mm inside diameter using a union nut. It delivers a normal nominal flow rate of 252 l/min to 756 l/min alongside an ISO 8778 standardized flow rate of 273.2 l/min to 819.5 l/min within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo double-acting industrial component features a 100 mm piston diameter, a 400 mm stroke, and an M20x1,5 male piston-rod thread conforming to ISO 15552. Operating within a 0.6 to 12 bar pressure range on compressed air according to ISO 8573-1:2010 [7:4:4], it delivers theoretical forces of 4,712 N on the advance stroke and 4,418 N on the return stroke at 6 bar. The unit incorporates adjustable pneumatic cushioning at both ends (PPV) with a 32 mm cushioning length, position detection for proximity sensors, and a profile barrel design supporting any assembly position across an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →