Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo round cylinder DG-6-25 operates using compressed air in accordance with ISO8573-1:2010 [7:4:4]. Lubricated operation is possible for this component, though it is subsequently required for further operation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2226101 is a size 30 industrial component featuring a planar surface gantry structural design and an integrated line filter, operating via a PWM MOSFET power amplifier with cascade, P position, PI speed, and PI current controllers. This stepper motor unit achieves 2000 steps per revolution in microstepping mode with linear interpolation, supporting maximum speeds from 0.5 m/s to 1 m/s, accelerations from 10 m/s² to 20 m/s², and a repetition accuracy of ±0.05 mm at a 100% duty cycle. Equipped with an encoder position sensor, a 15-Ohm braking resistor, 7-segment and LED displays, and safe torque off (STO) alongside comprehensive protective functions, the unit accommodates block selection and direct position transfer modes in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal price quotation.
View product details →
Festo
The Festo 2123227 is a double-acting industrial component featuring a 40 mm piston diameter, a 300 mm stroke, and an M12x1.25 external piston rod thread on one end. Designed with a profile barrel structural layout conforming to ISO 15552, this unit operates within a pressure range of 0.06 MPa to 1.2 MPa and includes adjustable pneumatic cushioning at both ends with a 19 mm cushioning length. It accommodates compressed air conforming to ISO 8573-1:2010 [7:4:4], allows oil lubrication, and features position sensing via proximity switch with an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 2449945 is an industrial component featuring an anodized aluminum adapter plate with galvanized steel screws and a steel centering pin, supported by a RoHS compliant material makeup. This unit allows for mounting with a through-hole and screw or with a centering sleeve in any mounting position, while achieving a CRC 2 moderate corrosion stress rating and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 2617488 industrial component features a size 70 design with a 1:1 gear ratio, a transferable torque of 7 Nm, and a maximum rotational speed of 5000 rpm. Weighing 1730 g with a mass moment of inertia of 118 kgmm² and a no-load driving torque of 0.18 Nm, this unit includes a D40B actuator interface code and a 60P motor-in interface code. It provides an IP40 degree of protection, conforms to VDMA24364 Zone III LABS (PWIS) requirements, utilizes RoHS-compliant materials, and supports any mounting position within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 2226 is an industrial component featuring a G1/2 pneumatic connection and PVC seals. This RoHS-compliant unit has a product weight of 0.72 g and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. It operates with a nominal tightening torque of 47.9 Nm subject to a ±20% tolerance. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo industrial component, part number 2449935, features an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin. It supports any mounting position and utilizes through-hole, screw, and centering sleeve mounting methods. The assembly meets CRC 2 moderate corrosion stress standards, VDMA24364-B1/B2-L LABS conformity, and RoHS material compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 2614863, features a wrought aluminum alloy manifold rail with a width of 42 mm and a product weight of 2480 g, designed with G1/8 function ports 32 and 34, G1/8 pilot air port 14, and sub-base G1/4 pneumatic connections 22 and 44 alongside G1/4 connections 2 and 4. The unit operates within a pressure range of 0 bar to 16 bar, requires a pilot pressure of 3 bar to 8 bar, and delivers a normal nominal flow rate of 1400 l/min using compressed air as per ISO 8573-1:2010 [6:4:4] across a medium and ambient temperature range of 0 °C to 50 °C. Built with RoHS-compliant materials, a corrosion resistance class of CRC 0, and VDMA24364-B1/B2-L LABS conformity, it supports any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2123226 is a double-acting industrial component featuring a 40 mm piston diameter and a 150 mm stroke with an M12x1.25 external piston rod thread. Built with an ISO 15552 conforming profile barrel and adjustable pneumatic cushioning at both ends, this unit operates within a 0.6 bar to 12 bar pressure range and accommodates compressed air media per ISO 8573-1:2010 [7:4:4]. It includes position sensing via proximity switch, moderate corrosion resistance, and ISO 14644-1 Class 5 cleanroom suitability for an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 2225090 is an industrial component featuring a nominal length of 54 mm, a product weight of 710 g, and a mass moment of inertia of 39 kgmm², with a transferable torque of 17 Nm and a maximum rotational speed of 6000 rpm. Featuring actuator interface code R48 and motor input interface code 80P, this unit conforms to VDMA24364-B2-L LABS (PWIS) standards and includes RoHS-compliant materials alongside an IP40 degree of protection. It operates within an ambient temperature range of -10 °C to 60 °C, supports storage temperatures from -25 °C to 60 °C and relative air humidity between 0 and 95%, and accommodates any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 2449927 is an industrial component featuring an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin with RoHS-compliant materials. This hardware provides a CRC 2 moderate corrosion stress rating and VDMA24364-B1/B2-L LABS conformity while supporting any mounting position via a through-hole, screw, or centering sleeve installation. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
Engineered by Festo, this industrial component features a 42 mm width and a normal nominal flow rate of 1400 l/min based on DIN 1343 using compressed air according to ISO 8573-1:2010 [6:4:4]. The assembly incorporates a wrought aluminum alloy manifold rail, NBR O-rings, sub-base G1/4 and G1/8 pneumatic connections, and an operating pressure range from 0 bar to 16 bar across an ambient and medium temperature range of 0 °C to 50 °C. It carries a CRC rating of 0, VDMA24364-B1/B2-L LABS conformity, RoHS compliance, and a product weight of 1623 g while supporting any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 2225 is an industrial component featuring a G3/8 pneumatic connection and a product weight of 0.4 g. This RoHS compliant part utilizes PVC seals and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. It has a nominal tightening torque of 38.5 Nm with a tolerance of ±20%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 2123225 is a double-acting industrial component featuring a 40 mm piston diameter, a 70 mm stroke, and an M12x1.25 external piston rod thread on one end. Built within a profile barrel structural design conforming to ISO 15552, this unit operates at pressures from 0.06 MPa to 1.2 MPa utilizing compressed air according to ISO 8573-1:2010 [7:4:4]. It incorporates adjustable pneumatic cushioning at both ends with a 19 mm cushioning length, position sensing via proximity switch, and an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 2449921, features an anodized aluminum adapter plate with a RoHS-compliant material build, galvanized steel screws, and a steel centering pin. It supports any mounting position and utilizes a through-hole and screw setup or a centering sleeve. The unit possesses a CRC rating of 2 for moderate corrosion stress and conforms to VDMA24364-B1/B2-L LABS standards. Submit part number 2449921, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo mounting kit DAVM-MW-V1-50-V is an industrial component with a product weight of 160 g and a corrosion resistance class (CRC) rating of 1 for low corrosion stress environments. This assembly complies with VDMA24364-B1/B2-L LABS (PWIS) conformity standards and features RoHS compliant materials. Submit the exact part number, quantity, and application requirements to request a quote for this Festo component.
View product details →
Festo
The Festo part number 2224996 is an industrial component featuring a nominal length of 41 mm, a product weight of 350 g, and an interface code of R38 for the actuator alongside 60P for the motor in. This RoHS compliant part delivers a transferable torque of 4.4 Nm with a max. rotational speed of 8000 rpm and a mass moment of inertia of 3.5 kgmm², operating within an ambient temperature range of -10 °C to 60 °C and an IP40 degree of protection. Featuring VDMA24364-B2-L LABS conformity and an installation design suited for any mounting position, it accommodates storage temperatures from -25 °C to 60 °C and relative air humidity levels of 0 to 95%. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 2123224 is a double-acting industrial component featuring a 40 mm piston diameter, a 60 mm stroke, and an M12x1.25 external piston rod thread conforming to ISO 15552. Built with a profile barrel structural design and adjustable pneumatic cushioning at both ends, this unit operates within a pressure range of 0.06 MPa to 1.2 MPa and accommodates any mounting position. It includes position sensing via proximity switch, moderate corrosion resistance class 2, and cleanroom suitability according to ISO 14644-1 Class 5 for compressed air media complying with ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 2449380 is an industrial component weighing 1290 g featuring a motor-in interface code of 120G and a coupling housing interface code of 77B. This RoHS-compliant unit complies with VDMA24364-B2-L LABS (PWIS) conformity and supports installation in any mounting position. Operational parameters include an ambient temperature range of -10 °C to 60 °C, a storage temperature span of -25 °C to 60 °C, and a relative air humidity tolerance of 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2608532 is an industrial guide unit featuring a size 100 footprint and an adjustable stroke ranging from 1 mm to 550 mm. This component incorporates a recirculating ball bearing guide supporting a maximum dynamic force Fy and Fz of 2300 N, a maximum static force Fy and Fz of 3120 N, and a displacement force of 40 N with 0 µm reversing backlash. It accommodates dynamic moments Mx, My, and Mz up to 198 Nm, 197 Nm, and 197 Nm respectively, alongside static moments reaching 268 Nm for Mx and 267 Nm for My and Mz. Operating within an ambient temperature range of -20 °C to 80 °C, the unit features any mounting position, a CRC 0 corrosion resistance class, and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →