Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8142566 is a double-acting industrial component featuring a 12 mm piston diameter, a 25 mm stroke, and elastic cushioning rings or pads at both ends with an impact energy of 0.07 J. Engineered with a piston rod at one end containing an internal thread, this unit operates within a pressure range of 0.1 MPa to 1 MPa (1 bar to 10 bar or 14.5 psi to 145 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] and supports oil lubrication. It achieves a theoretical force of 51 N retracting and 68 N advancing at 6 bar, offers a corrosion resistance class of CRC 2, and meets ISO 14644-1 Class 5 cleanroom standards while being suitable for the production of lithium-ion batteries with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8139792 is a double-acting pneumatic parallel gripper featuring two jaws, a size 12 designation, and a complete stroke of 48 mm with 24 mm of stroke per gripper jaw. Operating within a pressure range of 1 bar to 7 bar (14.5 psi to 101.5 psi), this component incorporates a ball guide, gear rack and pinion structural design, and elastic cushioning rings or pads at both ends. It achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 2 Hz, zero gripper jaw angular play, and zero backlash Sz, with position sensing via proximity switch and position mounting in any orientation. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8124538 is an electromechanical linear axis featuring a ball screw with a 160 size, 1000 mm working stroke, and 20 mm screw diameter and pitch. Driven by a stepper or servo motor up to 3000 rpm, it delivers a maximum speed of 1 m/s, 15 m/s² acceleration, 150 µm reversing backlash, and ±0.02 mm repetition accuracy at a 100% duty cycle with a recirculating ball bearing guide supporting any mounting position. Compliant with VDMA24364 Zone III LABS conformity and ISO 14644-1 Class 8 cleanroom standards, this unit excludes specific copper, zinc, and nickel materials to remain suitable for reduced Cu/Zn/Ni Li-ion battery production. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8145420 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300 and an ISO 5211 standard valve connection. Operating within a pressure range of 2 bar to 8 bar and a nominal operating pressure of 6 bar, this unit delivers a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, the safety function executes via spring force to move the actuator to the defined safety position upon air exhaustion, supporting up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8142565 is a double-acting industrial component featuring a 12 mm piston diameter, a 20 mm stroke, and an internal thread piston rod end for flexible mounting in any position. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical force of 51 N retracting and 68 N advancing at 6 bar with elastic cushioning at both ends. It achieves ISO 14644-1 Class 5 cleanroom suitability and VDMA24364-B2-L LABS conformity with reduced Cu/Zn/Ni values (F1a), making it specified for production facilities manufacturing lithium-ion batteries. Submit part number 8142565, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8139791 is a double-acting pneumatic parallel gripper featuring two gripper jaws with a size of 12, a complete stroke of 24 mm, and a stroke per gripper jaw of 12 mm. This flat-mounting industrial component utilizes a gear rack and pinion structural design with a ball guide, operating at pressures between 0.1 MPa and 0.7 MPa with elastic cushioning rings or pads at both ends. It achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 2 Hz, a minimum opening time of 75 ms at 6 bar, and position sensing via a proximity switch. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8124537 is an electromechanical linear axis featuring a ball screw with a 20 mm screw diameter, a 20 mm/U spindle pitch, and a 900 mm working stroke. Built with a size 160 recirculating ball bearing guide and an integrated ball screw, this component supports a max speed of 1 m/s, max acceleration of 15 m/s², and a 100% duty cycle while accommodating either a stepper or servo motor in any mounting position. It achieves a repetition accuracy of ±0.02 mm, a reversing backlash of 150 µm, and a max rotational speed of 3000 rpm, adhering to ISO 14644-1 Class 8 cleanroom standards and VDMA24364 Zone III LABS conformity with reduced Cu/Zn/Ni values suitable for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8145419, is a single-acting gear rack and pinion valve actuator with a valve actuator size of 2300, an F16 flange hole pattern, and a 90-degree swivel angle. It features an ISO 5211 standard valve connection, a VDI/VDE 3845 NAMUR-conforming valve connection, a 48 mm shaft connection depth, and an operating pressure range of 2 bar to 8 bar with a 4.5 bar nominal operating pressure. Certified to ISO 13849 and IEC 61508 for safety functions up to SIL 2 in low demand mode and SIL 1 in high demand mode, the actuator switches to a defined safety position via spring force when compressed air is removed and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8142564 is a double-acting industrial component featuring a 12 mm piston diameter and a 15 mm stroke with a piston rod at one end and internal thread at the piston rod end. Operating on compressed air as per ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar, this unit delivers a theoretical force of 68 N advancing and 51 N retracting at 6 bar. It incorporates elastic cushioning rings at both ends for 0.07 J impact energy, position sensing via proximity switch, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a) and ISO Class 5 cleanroom requirements. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 8139790 is a double-acting pneumatic industrial component featuring two parallel gripper jaws with a size of 12 and a complete stroke of 12 mm, yielding a stroke of 6 mm per jaw. It utilizes a ball guide, a gear rack/pinion structural design with zero angular play and zero backlash, and incorporates elastic cushioning rings or pads at both ends. Operating within a pressure range of 1 bar to 7 bar (14.5 psi to 101.5 psi), this model delivers a repetition accuracy of 0.02 mm, a maximum operating frequency of 2 Hz, and a minimum opening time of 46 ms at 6 bar with position sensing via proximity switch. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8124536 is an electromechanical linear axis featuring a ball screw with a 20 mm screw diameter, 20 mm/U spindle pitch, and an 800 mm working stroke driven by a stepper or servo motor. This unit incorporates a recirculating ball bearing guide, supports any mounting position, and delivers a maximum speed of 1 m/s, maximum acceleration of 15 m/s², and repetition accuracy of ±0.02 mm with a 100% duty cycle. Certified to VDMA24364 Zone III for LABS conformity and ISO 14644-1 Class 8 for cleanroom use, the component is suitable for Li-ion battery production under restricted Cu/Zn/Ni material variants. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
This Festo industrial component features a size 2300 single-acting gear rack/pinion valve actuator with an F16 flange hole pattern and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar and a nominal operating pressure of 3.5 bar, the unit includes an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR compliance. Certified as a safety device under IEC 61508 and ISO 13849, the safety function utilizes spring force to switch the actuator to a defined safety position upon air exhaustion, supporting up to SIL 2 in low demand mode and SIL 3 in redundant architecture. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8142563 is a double-acting industrial component featuring a 12 mm piston diameter, a 10 mm stroke, and elastic cushioning rings or pads at both ends. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) and an ambient temperature range of 0 °C to 80 °C, this unit delivers a theoretical force of 68 N advancing and 51 N retracting at 6 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. Certified with a moderate corrosion resistance class (CRC 2), LABS conformity VDMA24364-B2-L, and ISO 14644-1 class 5 cleanroom suitability, the model is recommended for production facilities manufacturing lithium-ion batteries with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8139727 is a magneto-resistive position sensor featuring a design for round slots, an NPN switching output with an N.O. contact, and a max output current of 100 mA at a max switching frequency of 480 Hz. This oil-resistant component operates within an ambient temperature range of -20 °C to 70 °C, offering a repetition accuracy of 0.2 mm, a max switching capacity DC of 3 W, and 2.5 ms on and off times. It is RoHS compliant, halogen-free, copper-free, and conforms to EN 60947-5-2 with RCM, CE, UKCA, and KC-EMV certifications. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8124535 is an electromechanical linear axis featuring a ball screw with a 20 mm screw diameter, a 20 mm/U spindle pitch, and a working stroke of 750 mm supported by a recirculating ball bearing guide. This unit accommodates either a stepper or servo motor, achieving a maximum rotational speed of 3000 rpm, a maximum speed of 1 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.02 mm with a 100% duty cycle. Constructed with restrictions against metals containing copper, zinc, or nickel by mass as the main constituent, it conforms to VDMA24364 Zone III LABS conformity, meets ISO 14644-1 cleanroom Class 8, and is suitable for the production of Li-ion batteries with reduced Cu/Zn/Ni values (F1a). Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo 8145417 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300, an F16 flange hole pattern, and a 90-degree swivel angle. Operating at a nominal pressure of 6 bar (87 psi) with an operating range of 2 bar to 8 bar and a burst pressure of 24 bar, this safety device includes a spring assembly that switches the actuator to a defined safety switching position when compressed air is switched off and the spring chamber is exhausted. It conforms to ISO 5211 for standard valve connections and VDI/VDE 3845 (NAMUR) for valve and positioner connections, supports any mounting position, and is certified for safety functions according to ISO 13849 and IEC 61508 for use in control systems up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8139726 is a magneto-resistive industrial component designed for round slots with a PNP switching output and N.O. contact switching element function. It features a measuring principle that detects position within an ambient temperature range of -20 °C to 70 °C, a repetition accuracy of 0.2 mm, and a maximum switching frequency of 480 Hz. This oil-resistant, halogen-free, and copper-free component conforms to EN 60947-5-2 with RCM compliance, CE, UKCA, and KC-EMV markings. Submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8142562 is a double-acting industrial component featuring a 12 mm piston diameter and a 5 mm stroke with a single-end piston rod and internal thread. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) and an ambient temperature of 0 °C to 80 °C, this unit utilizes elastic cushioning rings at both ends for 0.07 J end-position impact energy. It delivers a theoretical force of 68 N advancing and 51 N retracting at 6 bar using compressed air per ISO 8573-1:2010 [7:4:4]. Certified with a CRC 2 rating and ISO 14644-1 Class 5 cleanroom suitability, this variant is recommended for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a) and supports proximity switch position sensing in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8124534 electromechanical linear axis features a size 160 structural design with a ball screw, 700 mm working stroke, and 0 mm stroke reserve. This component utilizes a recirculating ball bearing guide, 20 mm screw diameter, 20 mm/U spindle pitch, and achieves a repetition accuracy of ±0.02 mm with a reversing backlash of 150 µm. It operates at a 100% duty cycle, supporting a maximum speed of 1 m/s, maximum acceleration of 15 m/s², and maximum rotational speed of 3000 rpm in any mounting position. Compatible with stepper and servo motors, this unit meets VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 8 cleanroom standards, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8145416, is a single-acting gear rack/pinion valve actuator featuring a size 2300 design, an F16 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal angle. It operates within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) at a nominal operating pressure of 4.5 bar (65.25 psi) and a burst pressure of 24 bar, incorporating an ISO 5211 standard valve connection and VDI/VDE 3845 (NAMUR) compliance alongside a 48 mm shaft connection depth and any mounting position. Certified as a safety device under ISO 13849 and IEC 61508, the unit achieves up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture, utilizing spring force to drive the right-closing safety switching position upon compressed air exhaust. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →