Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
Manufactured by Festo under part number 8068945, this industrial component features a 40 µm grade of filtration and operates within a pressure range of -95 kPa to 0 kPa (-0.95 bar to 0 bar / -13.775 psi to 0 psi) using atmospheric air based on ISO 8573-1:2010 [7:-:-]. The unit incorporates a POM housing, PA and fabric compressed air filter, NBR seals, and is suitable for an ejector pulse of 0.7 MPa (7 bar / 101.5 psi) with VDMA24364-B1/B2-L LABS conformity and RoHS-compliant materials. Weighing 1.5 g and designed for push-fitted or snap-in mounting, it is supplied in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8066455 is a single-acting industrial component featuring a gear rack and pinion structural design with a size 480 valve actuator and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar, this safety device achieves its defined safety switching position via spring force when compressed air is switched off and the spring chamber is exhausted. It is certified for functional safety up to SIL 2 in low demand mode, up to SIL 1 in high demand mode, and up to SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8062789 is an electromechanical linear axis with a toothed belt featuring a size 80 frame, a 33.42 mm drive pinion effective diameter, and a 600 mm working stroke with 0 mm stroke reserve and a 3 mm toothed belt pitch. Incorporating a recirculating ball bearing guide and compatible with stepper or servo motors via any mounting position, this component achieves a max speed of 1.5 m/s, a max acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm during a 100% duty cycle. It provides position sensing via proximity switches or inductive sensors, operates in ambient temperatures from 0 °C to 50 °C with an IP40 degree of protection, and meets ISO 14644-1 Class 7 cleanroom, VDMA24364 Zone III LABS conformity, and reduced Cu/Zn/Ni battery production suitability standards. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8068944 is an industrial component featuring a 40 µm filtration grade and a product weight of 1 g, supplied in a pack size of 10. Constructed with a POM housing and a compressed air filter material of fabric and PA, this RoHS-compliant part supports push-fitted or snap-in mounting. It operates within a pressure range of -95 kPa to 0 kPa (-0.95 bar to 0 bar, -13.775 psi to 0 psi) using atmospheric air based on ISO 8573-1:2010 [7:-:-], with an ejector pulse suitability of 0.7 MPa (7 bar, 101.5 psi) and VDMA24364-B1/B2-L LABS (PWIS) conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8063636 is a directly controlled 2/2-way closed monostable industrial component featuring a 0.8 mm nominal width, a 9 mm width dimension, and an internal volume of 113 µl with fluid connections. Operating at a pressure range of 0 MPa to 0.05 MPa (0 bar to 0.5 bar, 0 psi to 7.25 psi) utilizing a soft sealing principle and a mechanical spring reset method, this unit includes a 1 mm nominal width and 30 mm length dosing needle achieving a water flow rate of 2000 µl/s at maximum operating pressure. It delivers a minimum dosing volume of 5 µl with an on switching time of 7 ms, an off switching time of 2 ms, and a maximum switching frequency of 4 Hz in any mounting position. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8066454 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 480 and an F1012 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle, operating within a pressure range of 2 bar to 8 bar. Certified for safety functions to ISO 13849 and IEC 61508, the unit incorporates a safety function that switches to the defined safety position via spring force when compressed air is switched off and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8062788 is an electromechanical linear axis featuring a toothed belt with a 3 mm pitch, a 33.42 mm drive pinion effective diameter, and a size 80 structural design with an integrated recirculating ball bearing guide. Operating with a 500 mm working stroke, a 100% duty cycle, a maximum speed of 1.5 m/s, and a maximum acceleration of 15 m/s², this unit achieves a repetition accuracy of ±0.1 mm and accommodates stepper or servo motors with position sensing via proximity switches or inductive sensors. It provides an IP40 degree of protection, an ambient temperature range of 0 °C to 50 °C, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and F1a battery production suitability with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8068943 is a single-acting gear rack and pinion valve actuator of size 2300 featuring an F1216 flange hole pattern, a 90-degree swivel angle, and an ISO 5211 standard valve connection. Operating between 2 bar and 8 bar with a nominal pressure of 6 bar and a burst pressure of 24 bar, this safety device executes a defined safety switching position via spring force when compressed air is removed and the spring chamber is exhausted. It is certified for safety functions under ISO 13849 and IEC 61508 for use up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8063635 is a directly controlled 2/2-way closed monostable industrial component featuring a soft sealing principle and a 0.8 mm nominal width. This 113 µl valve incorporates a 30 mm dosing needle with a 0.6 mm nominal width, achieving a water flow rate of 1300 µl/s at a maximum operating pressure of 0.05 MPa (0.5 bar / 7.25 psi) and a minimum dosing volume of 3 µl. Designed for any mounting position with a mechanical spring reset method, it offers an on switching time of 7 ms, an off switching time of 2 ms, and a maximum switching frequency of 4 Hz. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 8062787 is an electromechanical linear axis featuring a toothed belt drive with a 33.42 mm drive pinion effective diameter, a 3 mm toothed belt pitch, and a size 80 structural design with a 300 mm working stroke. Built with an integrated recirculating ball bearing guide and a 100% duty cycle, this component operates at a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm, supporting either stepper or servo motors with position sensing via proximity switches and inductive sensors. It conforms to VDMA24364 Zone III LABS conformity, carries an IP40 degree of protection, and meets ISO 14644-1 Class 7 cleanroom suitability alongside reduced Cu/Zn/Ni suitability for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8063634 is a directly controlled 2/2-way closed monostable industrial component featuring a 0.8 mm nominal width and a 30 mm dosing needle with a 0.32 mm nominal width. Operating at pressures from 0 to 0.05 MPa (0 to 0.5 bar / 0 to 7.25 psi), this 113 µl soft-sealing valve achieves a water flow rate of 370 µl/s at maximum operating pressure and a minimum dosing volume of 1 µl. It utilizes a mechanical spring reset method in any mounting position, delivering an on-switching time of 7 ms, an off-switching time of 2 ms, and a maximum switching frequency of 4 Hz. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8068942 is a double-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300 and a nominal swivel angle of 90 degrees. This device operates at a nominal operating pressure of 0.55 MPa, with an operating pressure range from 0.2 MPa to 0.8 MPa and a burst pressure of 24 bar, while supporting ISO 5211 valve connections and VDI/VDE 3845 NAMUR standards. Certified for safety functions to ISO 13849 and IEC 61508, the unit achieves up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8066453 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 300 and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar, this safety device incorporates a spring assembly to drive the actuator to the defined safety switching position when compressed air is switched off and the spring chamber is exhausted. It includes an ISO 5211 standard connection for valves, an F0710 flange hole pattern, and VDI/VDE 3845 conformance for both NAMUR valve connections and positioner or position sensor connection points, achieving certification for safety functions up to SIL 2 in low demand mode and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8062786 is an electromechanical linear axis featuring a toothed belt drive with a size 80 frame, a 33.42 mm drive pinion effective diameter, a 3 mm toothed belt pitch, and a 200 mm working stroke. Driven by a stepper or servo motor, this assembly achieves a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², a repetition accuracy of ±0.1 mm, and a 100% duty cycle utilizing an integrated recirculating ball bearing guide. Built with IP40 protection, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and reduced Cu/Zn/Ni values for Li-ion battery production, it operates in ambient temperatures from 0 °C to 50 °C with any mounting position and position sensing via proximity switches or inductive sensors. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8068941 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 2300 and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a nominal operating pressure of 6 bar (87 psi), this safety device closes to the right and utilizes spring force to switch to a defined safety position when compressed air is removed and the spring chamber is exhausted. It includes an ISO 5211 standard valve connection with an F1216 flange hole pattern, a 48 mm shaft connection depth, and VDI/VDE 3845 compliance for NAMUR valves and size AA 3 positioners or sensors. Certified for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in redundant architectures according to ISO 13849 and IEC 61508, it supports any mounting position and features end-position adjusting ranges of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo industrial component, part number 8063619, features a nominal length of 92.5 mm, a product weight of 2499 g, and an IP40 degree of protection with VDMA24364-B2-L LABS conformity. This part accommodates any mounting position, a maximum rotational speed of 5500 rpm, a transferable torque of 47 Nm, and a mass moment of inertia of 151 kgmm². Operating parameters include an ambient temperature range of -10 °C to 60 °C, storage temperatures between -25 °C and 60 °C, relative air humidity from 0 to 95%, RoHS compliant materials, an N80 actuator interface code, and a 120GC motor-in interface code. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8066452 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 300 and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, this safety device achieves its safety switching position via spring force upon the exhaustion of the spring chamber. It conforms to ISO 5211 and VDI/VDE 3845 standards, offers SIL 2 low demand and SIL 1 high demand capabilities (or up to SIL 3 in a redundant architecture), and can be mounted in any position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo size 60 electromechanical linear axis features an integrated toothed belt with a 3 mm pitch, a 24.83 mm drive pinion effective diameter, and a 2000 mm working stroke incorporating a recirculating ball bearing guide. This component operates with a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm at a 100% duty cycle, supporting either stepper or servo motors with position sensing via proximity switches or inductive sensors. Certified to ISO 14644-1 Class 7 cleanroom suitability and VDMA24364 Zone III LABS conformity, the unit functions in ambient temperatures from 0 °C to 50 °C with an IP40 degree of protection and is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Manufactured by Festo, this industrial component (Part Number: 8063618) features an actuator interface code of N80, a motor input interface code of 120GB, and a transferable torque of 47 Nm with a mass moment of inertia of 151 kgmm². The unit operates at a maximum rotational speed of 5500 rpm in any mounting position, presenting a nominal length of 82.5 mm, a product weight of 2181 g, an IP40 degree of protection, and RoHS-compliant materials conforming to VDMA24364-B2-L LABS (PWIS). It functions within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and relative air humidity levels from 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 8068940, is a double-acting gear rack and pinion valve actuator featuring an ISO 5211 F1216 flange hole pattern and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 to 5 degrees. Engineered for safety-related control systems, this safety device achieves its designated switching position through compressed air pressurization and supports applications up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a nominal operating pressure of 5.5 bar, the unit includes a VDI/VDE 3845 NAMUR valve connection and a VDI/VDE 3845 Size AA 3 connection point for positioners and position sensors. Submit part number 8068940, quantity, and application requirements to request a formal quote.
View product details →