Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 571339 is an industrial component featuring a block design based on the EN 60947-5-2 norm with magneto-inductive measuring principles for position. This component operates within an ambient temperature range of -20 °C to 70 °C and includes a PNP switching output with a N.O. contact, 2 mm hysteresis, 0.5 ms on and off times, 200 mA max output current, 6 W max DC switching capacity, 1.8 V voltage drop, and 0 mA minimum load current. It carries RCM, CE, and UKCA compliance marks, complies with EMC and RoHS directives, is halogen-free, features an inductive protective circuit adapted to MZ, MY, and ME coils, and supports the actuator-sensor overview application note. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 570007 is an industrial component weighing 570 g with an angled M12x1 A-coded 8-pin socket featuring an 8-wire open-end cable on the control side. It conforms to EN 61076-2-101, operates within a 0 V to 30 V AC and DC range, and provides a 2 A current rating at 40° C with a 0.8 kV surge resistance. This component utilizes a rotatable screw-type lock on the field device side and comes without a label holder. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 570527 is a square industrial component based on the VDI/VDE 3845 NAMUR norm that measures rotation angle using the magnetic Hall measuring principle with a 4 to 20 mA analog output and a repetition accuracy of plus or minus 1 degree. This unit operates within a DC voltage range of 15 V to 30 V, drawing an idle current between 12 mA and 20 mA, and features short-circuit protection, overload protection, and reverse polarity protection for all electrical connections housed via a 9-pin pluggable screw terminal supporting a 2.5 mm² nominal conductor cross-section and an M20 cable fitting for 5 mm to 13 mm cables. Rated for an ambient temperature range of -20 °C to 80 °C, the device carries RCM compliance, c UL us recognition, RoHS material compliance, and CE and UKCA markings as per EMC and RoHS directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 571334 is a 5/2-way monostable industrial component featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle. It operates at 24V DC with an operating pressure range of -0.09 MPa to 0.8 MPa (-0.9 bar to 8 bar), delivers a normal nominal flow rate of 360 l/min, and includes mechanical spring reset, piloted control with reversible flow direction, and an IP65 degree of protection when mounted. Additional verified specifications consist of detenting and non-detenting manual override, positive overlap lap, a signal status display, a pilot pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), vacuum suitability, c UL us recognition, and any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo industrial component (part number 567988) is a red TPE-U ether-based pneumatic tubing featuring a 1/4" external diameter, a Shore hardness of D 52 +/-3, and a product weight of 2.47 oz/ft. It handles compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water within a temperature-dependent operating pressure range of -14.4 psi to 145 psi, while maintaining suitability for energy chains and battery production with reduced Cu/Zn/Ni values (F1a). The tubing operates in ambient temperatures from -31 °F to 145 °F, incorporates a min. bending radius of 0.032 Feet, and complies with RoHS and UL94 HB fire test standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 570517, is a nature-colored pneumatic tubing featuring a 14 mm outside diameter, a 9.5 mm inside diameter, an 80 mm bending radius relevant for flow rate, and a 45 mm minimum bending radius. Constructed with a Shore hardness of D 52 +/-3 and a product weight of 0.0773 kg/m, the RoHS-compliant tubing supports compressed air and water operating mediums within a temperature-dependent operating pressure range of -0.95 bar to 10 bar. TÜV certified under authority B 013277 0527 00, the element exhibits VDMA24364-B2-L LABS conformity and operates in ambient temperatures from -30 °C to 60 °C while accommodating plug connections for 14 mm outside diameter tubing in energy chains. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 569998 is an industrial component featuring a product weight of 4.7 g and a corrosion resistance class of CRC 2 for moderate corrosion stress. Constructed with steel DIN rail mounting material, this RoHS compliant item maintains VDMA24364-B2-L LABS conformity regarding PWIS. Request a formal quote by submitting the exact part number, required quantity, and application specifications.
View product details →
Festo
The Festo 571333 is an electrical 5/2-way monostable industrial component utilizing a piston gate valve structural design with a soft sealing principle and positive overlap lap. Featuring a 20 mm valve size, this piloted component delivers a normal nominal flow rate between 670 l/min and 840 l/min at an operating pressure ranging from -0.09 MPa to 0.8 MPa and a pilot pressure of 3 bar to 8 bar. It operates on 24V DC, provides IP65 protection in the mounted state according to IEC 60529, includes a signal status display, and incorporates both detenting and non-detenting manual overrides alongside mechanical spring reset. Submit the exact part number, quantity, and application requirements to request a formal quote for this c UL us-recognized part.
View product details →
Festo
The Festo part number 570516 is a black pneumatic tubing component with a 14 mm outside diameter, a 9.5 mm inside diameter, and a Shore hardness of D 52 +/-3. It features an 80 mm bending radius relevant for flow rate, a 45 mm minimum bending radius, and is suitable for energy chains while operating within a temperature-dependent pressure range of -0.95 bar to 10 bar for compressed air according to ISO 8573-1:2010 [7:-:-]. Certified by TÜV under authority B 013277 0527 00, this RoHS-compliant RoHS component accommodates a pneumatic connection for a 14 mm outside diameter plug connection and withstands ambient temperatures from -30 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 569997 is a 13 g industrial component featuring a brass plug and screws, a steel circlip, and FPM seals. This RoHS-compliant part complies with VDMA24364 Zone III LABS conformity and is rated for CRC 0 no corrosion stress. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 571303 is a pilot-controlled diaphragm regulator featuring a 3-way proportional pressure control valve with a soft sealing principle and an electrical actuation type via a DC operating voltage range of 21.6 V to 26.4 V. It offers a pressure regulation range of 0.06 bar to 6 bar (0.006 MPa to 0.06 MPa), an inlet pressure range up to 8 bar (0.8 MPa), a maximum pressure hysteresis of 0.03 bar, a normal nominal flow rate of 1750 l/min, and an 8 mm nominal width pressurization with a 7 mm exhaust nominal width. This component includes a backlit LCD display, a mechanical spring reset method, piloted control, and short-circuit and reverse polarity protection for all electrical connections, while operating in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo 569996 is an industrial component weighing 10 g, featuring a plug and screws made of brass, a circlip made of steel, and FPM seals. This RoHS compliant part complies with VDMA24364 Zone III LABS conformity and possesses a corrosion resistance class (CRC) of 0 for no corrosion stress. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 570506 is a single-acting industrial component featuring a size 4 design with a 4 mm stroke and a pushing mode of operation. This self-adjusting cushioning unit operates in any mounting position within an ambient temperature range of -10 °C to 80 °C, absorbing a maximum energy of 0.6 J per stroke with a 100 N max stop force. It offers a corrosion resistance class of CRC 2, adheres to VDMA24364-B2-L LABS conformity, and weighs 5 g without position sensing. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 571302 is a pilot-controlled diaphragm regulator featuring a 3-way proportional pressure control valve with an 8 mm nominal width pressurization and a 7 mm exhaust nominal width. This electrical component provides a pressure regulation range of 0.06 bar to 6 bar, an inlet pressure range up to 8 bar, and a normal nominal flow rate of 1750 l/min utilizing soft sealing and a mechanical spring reset method. Integrated features include LED display type, reverse polarity and short-circuit protection for all electrical connections, and operation within a DC operating voltage range of 21.6 V to 26.4 V. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
This Festo industrial component, part number 567984, is a green TPE-U ether-based pneumatic tubing featuring a 5/8 inch external diameter and a Shore hardness of D 52 +/-3. The tubing operates with compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water, supporting a temperature-dependent operating pressure ranging from -14.4 psi to 145 psi across an ambient temperature range of -31 °F to 145 °F. Designed with a minimum bending radius of 0.125 feet and a bending radius relevant for flow rate of 0.288 feet, the RoHS compliant part is suitable for energy chains and the production of Li-ion batteries with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 569995 is an industrial component weighing 8 g featuring a brass plug and screws, a steel circlip, and FPM seals. This RoHS compliant part exhibits a corrosion resistance class of CRC 0 for no corrosion stress and conforms to VDMA24364 Zone III LABS PWIS requirements. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 570504 is an electromechanical linear axis featuring a toothed belt with a 5 mm pitch, a 52.52 mm drive pinion effective diameter, and a size 120 designation. This component incorporates a plain-bearing guide and supports any mounting position with a working stroke ranging from 50 mm to 8500 mm. Driven by either a stepper or servo motor, it achieves a maximum speed of 5 m/s, a maximum acceleration of 50 m/s², and a repetition accuracy of ±0.08 mm under a 100% duty cycle. Operating within an ambient temperature range of -10 °C to 60 °C, the unit delivers a maximum driving torque of 34.2 Nm alongside maximum forces Fy of 380 N and Fz of 1600 N while maintaining an IP40 degree of protection and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 567983, is a green TPE-U ether-based pneumatic tubing featuring a 1/2-inch external diameter and a Shore hardness of D 52 +/-3. It accommodates compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water within a temperature-dependent operating pressure range of -14.4 psi to 145 psi, and an ambient temperature range of -31 °F to 145 °F. The tubing is suitable for energy chains and Li-ion battery production with reduced Cu/Zn/Ni values (F1a), and weighs 9.46 oz/ft with a minimum bending radius of 0.075 feet. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 569994 is an industrial component featuring a product weight of 7 g with RoHS compliant materials. Constructed with brass screws, a steel circlip, a brass plug, and FPM seals, this part operates with a VDMA24364 Zone III LABS conformity and a CRC 0 corrosion resistance class. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 571301 is a pilot-controlled diaphragm regulator featuring a 3-way proportional pressure control valve with electrical actuation and a mechanical spring reset method. It operates within a pressure regulation range of 0.06 bar to 6 bar (0.006 MPa to 0.6 MPa), an inlet pressure range of 0 bar to 8 bar (0 MPa to 0.8 MPa), a DC operating voltage range of 21.6 V to 26.4 V, and delivers a normal nominal flow rate of 1750 l/min with soft sealing, an 8 mm pressurization nominal width, and a 7 mm exhaust nominal width. This component includes a backlit LCD display, short-circuit and reverse polarity protection for all electrical connections, and maintains outlet pressure in an uncontrolled form if the supply cable breaks according to its safety instructions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →