Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 552654 is an industrial component featuring a wrought aluminum alloy manifold rail with a maximum of 4 valve positions and a product weight of 126 g. This component includes G1/8 pneumatic connection 1 and G1/8 pneumatic connection 3, while meeting RoHS compliance, VDMA24364-B2-L LABS conformity, and CRC 2 moderate corrosion stress resistance. Request a formal quote for this exact part number by submitting your required quantity and application specifications.
View product details →
Festo
The Festo part number 553092 is an MS-series size 9 industrial component featuring a fiber filter structural design with a 1 µm grade of filtration and 99.99% filter efficiency. This unit operates within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar, 29 psi to 174 psi) and supports a maximum standard flow rate of 7000 l/min alongside a minimum standard flow rate of 350 l/min for compressed air as per ISO 8573-1:2010 [6:-:4]. Equipped with a maximum condensate volume of 225 ml and dual fully automatic or manual, non-detenting condensate drains, the device delivers an output air quality class of ISO 8573-1:2010 [5:-:3] with 0.5 mg/m³ residual oil content. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 553195 is a single-acting industrial component featuring a kinematic yoke system with a 90-degree swivel angle and an ISO 5211 flange hole pattern of F05 or F07. This size 0053 actuator operates at a nominal pressure of 0.56 MPa within an operating pressure range of 0.35 MPa to 0.84 MPa, while supporting safety integrity levels up to SIL 2 in low demand mode. Request a quote by submitting the exact part number, required quantity, and your application specifications.
View product details →
Festo
The Festo part number 552653 is an industrial component featuring a wrought aluminum alloy manifold rail with a maximum of 3 valve positions and a product weight of 105 g. This component includes G1/8 pneumatic connections 1 and 3, and utilizes RoHS-compliant materials with a corrosion resistance class (CRC) of 2 for moderate corrosion stress and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 553090 is an industrial component from the MS series, size 9, featuring a fiber filter structural design with a 1 µm grade of filtration and a manual, rotating condensate drain. This unit operates within a pressure range of 0 MPa to 2 MPa (0 bar to 20 bar, 0 psi to 290 psi) and handles a maximum standard flow rate of 7000 l/min alongside a minimum standard flow rate of 350 l/min for compressed air conforming to ISO 8573-1:2010 [6:-:4]. It achieves a 99.99% filter efficiency, a 99% fine particle filter efficiency, a maximum condensate volume of 225 ml, and outputs compressed air per ISO 8573-1:2010 [5:-:3] with a residual oil content of 0.5 mg/m³ across a medium and ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 553194 is a single-acting industrial component featuring a kinematic yoke system and a 90-degree swivel angle. Operating within a pressure range of 3.5 bar to 8.4 bar at a nominal pressure of 5.6 bar, this unit includes an ISO 5211 flange hole pattern of F05 or F07 and a VDI/VDE 3845 NAMUR valve connection. It provides functional safety up to SIL 2 in low demand mode and achieves a maximum swivel frequency of 1 Hz at 6 bar with no cushioning. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 552652 industrial component features a wrought aluminum alloy manifold rail supporting a maximum of two valve positions and a product weight of 84 g. This unit is classified with a corrosion resistance class (CRC) of 2 for moderate corrosion stress and maintains VDMA24364-B2-L LABS conformity with RoHS-compliant materials. Pneumatic connections 1 and 3 both utilize G1/8 sizing. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 553088 is an MS series size 9 industrial component featuring a fiber filter structural design with a 0.01 µm grade of filtration and 99.9999% filter efficiency. Operating within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar), this unit processes compressed air according to ISO 8573-1:2010 [6:-:4] to deliver output air quality class [3:-:2] at standard flow rates between 325 l/min and 6500 l/min. It includes fully automatic and manual non-detenting condensate drains with a maximum condensate volume of 225 ml, and is rated for a medium and ambient temperature range of 5 °C to 60 °C with a moderate corrosion resistance class of 2. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 552651 is an industrial component featuring a steel cover plate and NBR seals with a product weight of 6 g. It is RoHS compliant and exhibits a corrosion resistance class of CRC 2 for moderate corrosion stress, alongside VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 553193 is a single-acting industrial component featuring a 0030 valve actuator size, F04 flange hole pattern, and a kinematic yoke system structural design with a 90-degree swivel angle. It operates at a nominal pressure of 0.56 MPa (5.6 bar) within an operating pressure range of 0.35 MPa to 0.84 MPa, utilizes a VDI/VDE 3845 NAMUR standard valve connection, and provides safety integrity level up to SIL 2 low demand mode. This un-cushioned unit closes to the right, accommodates any mounting position, and offers an adjustable end-position range from -1 to 9 degrees at 0 degrees and 81 to 91 degrees at the nominal swivel angle. Submit the exact part number, quantity, and application requirements to receive an official price quote.
View product details →
Festo
The Festo Size 9 industrial component from the MS series is a fiber filter featuring a 0.01 µm grade of filtration and a 99.9999 % filter efficiency. Operating within a pressure range of 0 MPa to 2 MPa (0 bar to 20 bar), this unit processes compressed air conforming to ISO 8573-1:2010 [6:-:4] to an output air quality class of ISO 8573-1:2010 [3:-:2] at standard flow rates between 325 l/min and 6500 l/min. It includes a manual, rotating condensate drain with a maximum condensate volume of 225 ml, exhibits a corrosion resistance class of 2 for moderate corrosion stress, and meets ISO 14644-1 cleanroom suitability class 7 with a medium and ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553192 is a single-acting industrial component featuring a 0015 size valve actuator, an F04 flange hole pattern, and a kinematic yoke system structural design with a 90-degree swivel angle. Operating within a pressure range of 0.35 MPa to 0.84 MPa and a nominal pressure of 0.56 MPa, this un-cushioned unit offers an end-position adjusting range from -1 to 9 degrees at 0° and 81 to 91 degrees at the nominal swivel angle, with one end position optionally adjustable. It includes an ISO 5211 standard connection for valves, a VDI/VDE 3845 NAMUR valve connection, a 13.2 mm shaft connection depth, a closing direction to the right, and safety integrity level support up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 552562 is an industrial component featuring an AS-Interface fieldbus interface and flat cable plug connections for both fieldbus and load voltage. It accommodates a maximum of 8 valve positions, 8 solenoid coils, and 8 inputs, operating across an AS-Interface DC voltage range of 26.5 V to 31.6 V and a load voltage range of 21.6 V DC to 26.4 V DC. Built with reverse polarity protection for all electrical operating voltage connections, device-specific diagnostics for input short circuits and overloads, and a corrosion resistance class of CRC 2, it maintains precise power and signal distributions with specified debounce times and current consumption parameters. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 553191 is a single-acting industrial component featuring a kinematic yoke system with a size 0015 valve actuator and a 90-degree swivel angle. Operating within a pressure range of 3.5 bar to 8.4 bar and supporting SIL 2 low demand mode, it includes an F03 and F05 flange hole pattern conforming to ISO 5211. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 552561 is an industrial component featuring an AS-Interface fieldbus interface and flat cable plug connections for both fieldbus and load voltage. It supports a maximum of 4 valve positions, 4 solenoid coils, and 4 inputs, operating within an AS-Interface DC voltage range of 26.5 V to 31.6 V and a load voltage range of 21.6 V to 26.4 V DC. The unit includes reverse polarity protection for all electrical operating voltage connections, device-specific diagnostics for short circuit or overload of inputs, and a moderate corrosion resistance class (CRC 2). Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 553190 is a double-acting industrial component featuring a structural kinematic yoke system with a valve actuator size of 5760 and an ISO 5211 F25 flange hole pattern. It operates within a pressure range of 0.3 MPa to 0.84 MPa at a nominal operating pressure of 0.56 MPa, delivering a 90-degree swivel angle with no cushioning and a max swivel frequency of 1 Hz at 6 bar. This unit includes VDI/VDE 3845 NAMUR valve connections, right-closing direction, an end-position adjusting range of -5 degrees to 5 degrees at 0 degrees and 85 degrees to 95 degrees at the nominal angle, a 58 mm shaft connection depth, and carries CE and UKCA markings per ATEX and UK EX directives alongside SIL 2 low demand mode capabilities. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 552560 is an industrial component featuring an AS-Interface fieldbus interface via a flat cable plug and a load voltage connection via a flat cable plug operating within a 21.6 V to 26.4 V DC range. This device supports a maximum of 8 valve positions, 8 solenoid coils, 8 inputs, and 2 slaves per device, incorporating reverse polarity protection for all electrical operating voltage connections along with device-specific diagnostics for short circuit or overload of inputs. Built with a Corrosion Resistance Class of CRC 2 for moderate corrosion stress and LABS conformity to VDMA24364-B1/B2-L, it operates with a nominal AS-Interface DC voltage of 26.5 V and a nominal load voltage of 24 V DC. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 553189 is a double-acting industrial component featuring a size 3840 valve actuator with an F16 flange hole pattern and a kinematic yoke system structural design. This unit provides a 90-degree swivel angle with an un-cushioned design, offering an end-position adjusting range of -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal swivel angle. Operating within a pressure range of 0.3 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, it includes VDI/VDE 3845 NAMUR valve connection conformity, SIL 2 low demand mode safety integrity, and ATEX and UKCA explosion protection markings. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 552559 is an industrial component featuring an AS-Interface fieldbus interface via a flat cable plug and a load voltage connection via a flat cable plug operating within a range of 21.6 V to 26.4 V DC. This unit supports a maximum of 4 valve positions, 4 solenoid coils, and 4 inputs, incorporating device-specific diagnostics for short circuit or overload of inputs with a 3 ms debounce time. Built with a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364-B1/B2-L LABS conformity, it includes reverse polarity protection across all electrical operating voltage connections and accommodates 1 slave per device. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553188 is a double-acting industrial component featuring a size 2880 valve actuator with a kinematic yoke system structural design and F16 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjusting range of -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal swivel angle, operating at a nominal pressure of 0.56 MPa within an operating pressure range of 0.3 MPa to 0.84 MPa. This un-cushioned unit includes an ISO 5211 standard connection for the valve, VDI/VDE 3845 NAMUR valve connection conformance, a 49.5 mm shaft connection depth, closes to the right, operates at a maximum swivel frequency of 1 Hz at 6 bar in any mounting position, lacks position sensing, and achieves a safety integrity level up to SIL 2 low demand mode alongside CE and UKCA markings per EU and UK explosion protection directives. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →