Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 552429 is a 5/2-way monostable industrial component featuring a piloted, piston gate valve structural design with soft sealing principles and a nominal width of 7 mm. This electrical component operates on 110V AC within an operating and pilot pressure range of 2 bar to 10 bar, delivering a normal nominal flow rate of 900 l/min through a sub-base pneumatic working port. Built with an IP65 degree of protection, adjustable exhaust air function, mechanical spring reset, and detenting manual override, it conforms to the VDI/VDE 3845 NAMUR standard and carries c UL us recognition. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
The Festo part number 553060 is an industrial component belonging to the MS series, size 9, featuring a fiber filter structural design with a 1 µm grade of filtration and 99.99% filter efficiency. It operates within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar, 29 psi to 174 psi) utilizing compressed air as per ISO 8573-1:2010 [6:-:4], and includes both fully automatic and manual, non-detenting condensate drains with a maximum condensate volume of 225 ml. The unit delivers an output air quality class according to ISO 8573-1:2010 [5:-:3], supporting a standard flow rate ranging from 500 l/min to 10000 l/min, a fine particle filter efficiency of 99%, and a residual oil content of 0.5 mg/m³ across a medium, ambient, and storage temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553181 is a double-acting industrial component featuring a 0720 valve actuator size, a kinematic yoke system structural design, and an ISO 5211 standard connection for valves with F10 and F12 flange hole patterns. Operating at a nominal pressure of 0.56 MPa within a 0.3 MPa to 0.84 MPa range, this 90-degree swivel unit provides a shaft connection depth of 29.5 mm, an end-position adjusting range at 0 degrees from -1 deg to 9 deg, and a maximum swivel frequency of 1 Hz at 6 bar without cushioning. It incorporates VDI/VDE 3845 NAMUR valve connections, supports functional safety up to SIL 2 in low demand mode, and carries CE and UKCA markings for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention and protection with a right-closing direction. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 553058 is an industrial component from the MS series, size 9, featuring a fiber filter structural design with a 1 µm grade of filtration and a 99.99% filter efficiency. This unit operates within a pressure range of 0 bar to 20 bar and accommodates standard flow rates from 500 l/min to 10000 l/min for compressed air adhering to ISO 8573-1:2010 [6:-:4]. It is equipped with a manual rotating condensate drain, a maximum condensate volume of 225 ml, and maintains a residual oil content of 0.5 mg/m³ while operating at temperatures between -10 °C and 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo 552428 is a 5/2-way monostable industrial component featuring a piloted, piston gate valve design with soft sealing and a nominal width of 7 mm. Engineered with an electrical actuation type, a 230V AC operating voltage, and a normal nominal flow rate of 900 l/min, this unit operates within a pressure range of 2 bar to 10 bar and conforms to VDI/VDE 3845 (NAMUR) standards. It includes a mechanical spring reset method, an adjustable exhaust air function, a detenting manual override, and a sub-base pneumatic working port providing IP65 protection in any mounting position, backed by c UL us recognition. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 553180 is a double-acting industrial component featuring a 0480 size valve actuator with a kinematic yoke system and a 90-degree swivel angle. It incorporates an ISO 5211 standard connection for valves, a VDI/VDE 3845 (NAMUR) valve connection, F10 and F12 flange hole patterns, and a shaft connection depth of 29.5 mm without cushioning. Rated for an operating pressure range of 0.3 MPa to 0.84 MPa (3 bar to 8.4 bar) and a nominal operating pressure of 0.56 MPa (5.6 bar), this unit supports a maximum swivel frequency of 1 Hz at 6 bar and features an end-position adjusting range at 0° from -1° to 9°. Certified for safety integrity level (SIL) up to SIL 2 low demand mode, the assembly includes ATEX and UKCA markings for explosion prevention and protection in ATEX Zone 1, Zone 2, Zone 21, and Zone 22 with right-closing direction and any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 553056 is an MS series size 9 fiber filter featuring a 0.01 µm filtration grade, a maximum condensate volume of 225 ml, and fully automatic or manual non-detenting condensate drains. Operating at pressures from 0.2 MPa to 1.2 MPa (2 bar to 12 bar) with compressed air as per ISO 8573-1:2010 [6:-:4], this component achieves an output air quality class of ISO 8573-1:2010 [3:-:2] alongside a 99.9999% filter efficiency and a 7800 l/min maximum standard flow rate for air quality class. Featuring a CRC 2 moderate corrosion stress rating and ISO 14644-1 Class 7 cleanroom suitability, the unit operates within a medium and ambient temperature range of 5 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 552424 industrial component features a die-cast aluminum housing, a PE cushioning insert, and a G1/4 pneumatic connection with any mounting position. It operates within a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar), delivers an atmospheric flow rate of 3400 l/min, and generates a noise level of 77 dB(A) across an ambient temperature range of -10 °C to 70 °C. Operating with compressed air as per ISO 8573-1:2010 [7:-:-], this 17 g unit permits oil lubrication and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 553179 is a double-acting industrial component featuring a kinematic yoke system with a 0360 size valve actuator and a 90-degree swivel angle. It operates within a pressure range of 0.3 MPa to 0.84 MPa (3 bar to 8.4 bar) at a nominal operating pressure of 0.56 MPa (5.6 bar), and includes ISO 5211 valve connection with F07 and F10 flange hole patterns. Certified with ATEX and UKCA markings for explosion prevention and protection in Zone 1, Zone 2, Zone 21, and Zone 22, this unit achieves a safety integrity level up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 553054 is a size 9 industrial component from the MS series featuring a fiber filter structural design with a 0.01 µm grade of filtration and a manual, rotating condensate drain. It operates within a pressure range of 0 MPa to 2 MPa and 0 bar to 20 bar, processing compressed air per ISO 8573-1:2010 [6:-:4] to deliver an output air quality class of ISO 8573-1:2010 [3:-:2] with a maximum standard flow rate of 7800 l/min. This unit achieves a filter efficiency of 99.9999% and a fine particle filter efficiency of 99.995% at an MPPS of 0.1 µm, accommodating a maximum condensate volume of 225 ml within a moderate corrosion stress (CRC 2) environment and a temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 552423 industrial component features a die-cast aluminum housing, a G1/8 pneumatic connection, and a PE cushioning insert, weighing 8 g with any mounting position. It operates on compressed air as per ISO 8573-1:2010 [7:-:-] at pressures from 0 MPa to 1 MPa (0 bar to 10 bar), delivering an atmospheric flow rate of 2050 l/min and a noise level of 77 dB(A) within an ambient temperature range of -10 °C to 70 °C. This unit conforms to VDMA24364-B1/B2-L LABS (PWIS) standards and permits operation with oil lubrication, which is required for further use. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 553178 is a double-acting industrial component featuring a 0240 valve actuator size with a kinematic yoke system and a 90-degree swivel angle. Operating within a pressure range of 0.3 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, this unit includes an F07 and F10 flange hole pattern, a 24.8 mm shaft connection depth, and VDI/VDE 3845 NAMUR valve connections without cushioning or position sensing. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas, it supports functional safety up to SIL 2 in low demand mode and includes CE and UKCA explosion protection markings. Submit your exact part number, quantity, and application requirements to request a quote for this Festo component.
View product details →
Festo
The Festo 552422 is an industrial component featuring a die-cast aluminum housing, a PE cushioning insert, and a G1/2 pneumatic connection with a product weight of 75 g. It operates within a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) and delivers a flow rate of 10600 l/min with respect to the atmosphere while generating a noise level of 80 dB(A). Designed for any mounting position, this unit functions with compressed air conforming to ISO 8573-1:2010 [7:-:-] at ambient temperatures from -10 °C to 70 °C, and accommodates oil lubrication which is required for further use. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553177 is a double-acting industrial component featuring an 0180 size valve actuator with a kinematic yoke system and a 90-degree swivel angle. Operating at a nominal pressure of 0.56 MPa with a range from 0.3 MPa to 0.84 MPa, this unit includes an F07 and F10 flange hole pattern, a 24.8 mm shaft connection depth, and VDI/VDE 3845 NAMUR standard valve connections without cushioning or position sensing. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion protection, it achieves Safety Integrity Level 2 in low demand mode and maintains a maximum swivel frequency of 1 Hz at 6 bar in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 552421 is an industrial component featuring a die-cast aluminum housing, a PE cushioning insert, and a G3/8 pneumatic connection with any mounting position. It operates within a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) and delivers a flow rate of 5900 l/min with respect to the atmosphere using compressed air conforming to ISO 8573-1:2010 [7:-:-]. This unit operates at an ambient temperature range of -10 °C to 70 °C, generates a noise level of 82 dB(A), weighs 37 g, complies with VDMA24364-B1/B2-L LABS (PWIS) standards, and permits oil lubrication which is required for further use. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo ABMW-PDAD wall mounting kit, designated as part number 553756, features corrosion resistance class (CRC) 2 for moderate corrosion stress and VDMA24364-B1/B2-L LABS (PWIS) conformity as documented in the official Festo EN-US data sheet. Request a formal quotation for this industrial component by submitting the exact part number, required quantity, and application parameters.
View product details →
Festo
The Festo part number 553176 is a double-acting industrial component featuring a 0106 valve actuator size, a kinematic yoke system structural design, and an F05 or F07 flange hole pattern. Operating within a pressure range of 0.3 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, this unit delivers a 90-degree swivel angle with an end-position adjusting range at 0 degrees from -1 deg to 9 deg. It includes a 19.3 mm shaft connection depth, ISO 5211 standard valve connection conforming to VDI/VDE 3845 (NAMUR), no cushioning, no position sensing, and closes to the right with a max swivel frequency of 1 Hz at 6 bar. Certified for safety up to SIL 2 low demand mode and carrying CE and UKCA markings for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion protection, it supports mounting in any position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 552420 is a diaphragm regulator featuring a continuous compressed air supply, a rotary knob with detent for actuator locking, and a pressure regulation range of 0.5 bar to 12 bar. It provides constant output pressure with primary pressure compensation and secondary exhausting, supporting a normal nominal flow rate of 420 l/min with an inlet pressure range of 1 bar to 20 bar. This component weighs 120 g, accommodates G1/8 pneumatic connections and pressure gauges, and permits operation with oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo foot mounting ABMF-PDAD, designated by part number 553755, features a corrosion resistance class (CRC) of 2 for moderate corrosion stress. This industrial component conforms to VDMA24364-B1/B2-L LABS (PWIS) standards according to the official Festo data sheet. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 553175 is a double-acting industrial component featuring a 0060 valve actuator size, a kinematic yoke system structural design, and a 90-degree swivel angle. Operating within a pressure range of 0.3 MPa to 0.84 MPa and a nominal pressure of 0.56 MPa, this unit utilizes an F05 and F07 flange hole pattern alongside an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 NAMUR specifications. It includes no cushioning or position sensing, offers a 16.5 mm shaft connection depth, features an end-position adjusting range at 0° from -1° to 9°, closes to the right, and provides ATEX and UKCA certifications for use in explosion protection Zones 1, 2, 21, and 22 up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →