Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 553076 is an industrial component from the MS series, size 9, featuring a fiber filter structural design with a 1 µm grade of filtration and 99.99% filter efficiency. It operates within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar, 29 psi to 174 psi) using compressed air as per ISO 8573-1:2010 [6:-:4], delivering an output air quality class of ISO 8573-1:2010 [5:-:3] with standard flow rates between 350 l/min and 7000 l/min. The unit includes both fully automatic and manual non-detenting condensate drains with a maximum condensate volume of 225 ml, a residual oil content of 0.5 mg/m³, and a fine particle filter efficiency of 99%, while maintaining a moderate corrosion resistance class (CRC 2), VDMA24364-B1/B2-L LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and an operating, ambient, and storage temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 553187 is a double-acting industrial component featuring a kinematic yoke system with a size 1920 valve actuator, a 90-degree swivel angle, and an end-position adjusting range at 0 degrees from -1 to 9 degrees. This un-cushioned unit connects via an ISO 5211 flange hole pattern of F12 or F16, a 48.5 mm shaft connection depth, and a VDI/VDE 3845 NAMUR valve standard, operating at a nominal pressure of 5.6 bar across a 3 bar to 8.4 bar operating pressure range with a maximum swivel frequency of 1 Hz at 6 bar. It offers SIL 2 low demand mode safety integrity, closes to the right without position sensing, accommodates any mounting position, and carries ATEX and UKCA markings for explosion prevention in zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo Size 9 industrial component from the MS series features a fiber filter structural design with a 1 µm grade of filtration and a manual, rotating condensate drain. This unit operates within a pressure range of 0 MPa to 2 MPa (0 bar to 20 bar, 0 psi to 290 psi) and handles a maximum standard flow rate of 7000 l/min alongside a minimum standard flow rate of 350 l/min for the specified air quality class. It achieves a filter efficiency of 99.99 percent, a fine particle filter efficiency of 99 percent, a maximum condensate volume of 225 ml, and a residual oil content of 0.5 mg/m³ while processing compressed air under ISO 8573-1:2010 [6:-:4] conditions. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 553072 is an industrial component within the MS series, size 9, featuring a fiber filter structural design with a 0.01 µm grade of filtration and 99.9999 % filter efficiency. It operates within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar) using compressed air as per ISO 8573-1:2010 [6:-:4], delivering an air quality class at the output as per ISO 8573-1:2010 [3:-:2] with a standard flow rate ranging from 325 l/min to 6500 l/min. The unit includes fully automatic or manual non-detenting condensate drain options, a maximum condensate volume of 225 ml, moderate corrosion stress resistance (CRC 2), and cleanroom suitability of Class 7 according to ISO 14644-1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553186 is a double-acting industrial component featuring a kinematic yoke system with a valve actuator size of 1920, an F14 flange hole pattern, and a 90-degree swivel angle. It operates within a pressure range of 0.3 MPa to 0.84 MPa (3 bar to 8.4 bar) with a nominal operating pressure of 0.56 MPa (5.6 bar), a shaft connection depth of 48.5 mm, and no cushioning or position sensing. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22, this unit provides safety integrity up to SIL 2 low demand mode, an ISO 5211 standard valve connection, and a VDI/VDE 3845 (NAMUR) compliant valve connection. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo part number 553769 is an industrial component featuring an outside diameter range of 4 mm to 16 mm, an inside diameter range of 2.7 mm to 10.8 mm, and a Shore hardness of D 52 +/-3. This tubing is suitable for energy chains, operates with compressed air as per ISO 8573-1:2010 [7:-:-] or liquid water, and handles a temperature-dependent operating pressure from -0.95 bar to 10 bar within an ambient temperature range of -30 °C to 60 °C. It carries TÜV certification under authority B 013277 0527 00, features VDMA24364-B2-L LABS conformity, and utilizes protective grounding as the material of pneumatic tubing while being RoHS compliant. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 553070 is an MS-series industrial component of size 9 featuring a fiber filter structural design with a 0.01 µm filtration grade and 99.9999% filter efficiency. It operates within a pressure range of 0 MPa to 2 MPa (0 bar to 20 bar) and a medium and ambient temperature range of -10 °C to 60 °C, utilizing compressed air as per ISO 8573-1:2010 [6:-:4] to deliver an output air quality class of ISO 8573-1:2010 [3:-:2]. The unit incorporates a manual rotating condensate drain with a maximum condensate volume of 225 ml, a maximum standard flow rate of 6500 l/min, and a minimum standard flow rate of 325 l/min. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-100 is an industrial component featuring a robust brass housing construction. This model conforms to VDMA24364-C1-L LABS (PWIS) standards according to official manufacturer specifications. Submit your exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
The Festo 553185 is a double-acting industrial component featuring a size 1440 valve actuator with an F14 flange hole pattern and a kinematic yoke system structural design. It provides a 90-degree swivel angle with an end-position adjusting range at 0 degrees from -1 to 9 degrees, a 38.5 mm shaft connection depth, and ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR). Operating at a nominal pressure of 0.56 MPa (5.6 bar) within a 0.3 MPa to 0.84 MPa range, this un-cushioned unit achieves a maximum swivel frequency of 1 Hz at 6 bar in any mounting position without position sensing, while supporting SIL 2 low demand mode and ATEX/UKCA zone 1, 2, 21, and 22 explosion protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-73 is an industrial component featuring a brass housing material and VDMA24364-C1-L LABS (PWIS) conformity according to official manufacturer specifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo part number 553184 is a double-acting industrial component featuring a kinematic yoke system with a size 1440 valve actuator and an F12 flange hole pattern. It provides a 90-degree swivel angle, closes to the right, and operates within a pressure range of 0.3 MPa to 0.84 MPa at a nominal operating pressure of 0.56 MPa. Designed with an ISO 5211 standard valve connection and VDI/VDE 3845 compliance, this unit supports a max swivel frequency of 1 Hz at 6 bar without cushioning and holds ATEX and UKCA certifications for use in Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 552432 is a mechanical, piloted 3/2-way closed monostable industrial component featuring a piston seat design and a nominal width of 3.5 mm. Constructed with an anodized wrought aluminum alloy housing, NBR seals, and G1/8 pneumatic connections across ports 1, 2, and 3, this unit delivers a normal nominal flow rate of 120 l/min at an operating pressure range of 3.5 bar to 8 bar. It provides a corrosion resistance class of CRC 2, VDMA24364-B1/B2-L LABS conformity, an actuating force of 3.1 N, and a product weight of 160 g for through-hole mounting within an ambient temperature range of -10 °C to 60 °C. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-51 is an industrial component featuring a brass housing material and VDMA24364-C1-L LABS (PWIS) conformity as detailed in the official data sheet. To receive current pricing and lead times for this component, submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 552431 is a quick exhaust valve featuring G1/4 pneumatic connections for ports 1, 2, and 3, an 8 mm nominal width, and a wrought aluminum alloy anodized housing with NBR seals. It operates within a pressure range of 0.5 bar to 10 bar, handles ambient and medium temperatures from -20 °C to 75 °C, and delivers a standard nominal flow rate of 1700 l/min for exhaust air and 950 l/min for pressurization using compressed air as per ISO 8573-1:2010 [7:-:-]. This unit offers through-hole mounting in any position, a product weight of 250 g, a moderate corrosion resistance class (CRC) of 2, and VDMA24364-B1/B2-L LABS conformity with oil lubrication operation possible. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 553183 industrial component is a double-acting valve actuator featuring a 0960 size, F14 flange hole pattern, and a kinematic yoke system with a 90-degree swivel angle. Operating within a pressure range of 0.3 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, this un-cushioned unit connects via ISO 5211 and VDI/VDE 3845 NAMUR standards with a 38.5 mm shaft connection depth. It delivers a maximum swivel frequency of 1 Hz at 6 bar while providing ATEX and UKCA certifications for explosive zones 1, 2, 21, and 22 along with SIL 2 low demand mode capabilities. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-22 is an industrial component featuring a brass housing construction. This official Festo part complies with VDMA24364-C1-L LABS (PWIS) conformity standards. Submit the exact part number, quantity, and application requirements to receive an official quote.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-13 is an industrial component featuring a brass housing and VDMA24364-C1-L LABS (PWIS) conformity according to official manufacturer data. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 552430 is a piloted 5/2-way monostable industrial component featuring a piston gate valve structural design with a 53 mm width and a 7 mm nominal width. Operating at 24V DC with an operating and pilot pressure range of 2 bar to 10 bar, this unit delivers a normal nominal flow rate of 900 l/min through a sub-base pneumatic working port and includes an adjustable exhaust air function, mechanical spring reset, detenting manual override, soft sealing principle, and IP65 degree of protection conforming to IEC 60529 and VDI/VDE 3845 (NAMUR) standards with c UL us (OL) certification for any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 553182 is a double-acting industrial component featuring a kinematic yoke system and a size 0960 valve actuator with an F10 or F12 flange hole pattern. It operates at a nominal pressure of 0.56 MPa across an operating pressure range of 0.3 MPa to 0.84 MPa, delivering a 90-degree swivel angle that closes to the right with an end-position adjusting range at 0° from -1° to 9°. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22, this unit includes a VDI/VDE 3845 NAMUR valve connection, an ISO 5211 standard valve connection, and supports safety integrity levels up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo air gun nozzle ADNA-PDAD-09 is an industrial component featuring a brass housing material and VDMA24364-C1-L LABS (PWIS) conformity as specified in the official data sheet. To receive current pricing and lead times, submit your exact part number, quantity, and application requirements for a formal quote.
View product details →