Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
This Festo industrial component features a planetary gear set with a 3:1 gear ratio, an 80 mm gearbox flange size, and an 87 mm motor flange size, delivering a continuous output torque of 85 Nm and a maximum output torque of 136 Nm at speeds up to 7000 rpm. Weighing 2100 g with a mass moment of inertia of 0.77 kgcm², the unit provides an IP54 degree of protection, a torsional backlash of 0.12 deg, a torsional rigidity of 6 Nm/arcmin, and operates within a temperature range of -25 °C to 90 °C while maintaining up to 98% efficiency. The RoHS compliant assembly includes an 80G output shaft gearbox interface, an 87A actuator gearbox interface, VDMA24364-B2-L LABS conformity, and accommodates a permissible axial shaft load of 1000 N alongside a permissible radial shaft load of 750 N. Submit part number 549432, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 547310 is a 10 mm electrical 3/2-way monostable open industrial component featuring a piston gate valve structural design with a soft sealing principle and positive overlap. Operating at 24V DC within an operating pressure range of -0.09 MPa to 0.7 MPa, this piloted unit delivers a normal nominal flow rate of 170 l/min through a QS-3 pneumatic working port. Additional specifications include external pilot air supply, pneumatic spring reset, IP40 protection, detenting and non-detenting manual override, an LED signal status display, and an external pilot pressure of 0.3 MPa to 0.7 MPa. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549670 is an industrial component featuring a double-acting kinematic yoke system with a valve actuator size of 2880, an F16 flange hole pattern, and a 90-degree swivel angle. Operating within a pressure range of 1 bar to 8.4 bar and a nominal operating pressure of 5.6 bar, this unit achieves a maximum swivel frequency of 1 Hz at 6 bar without cushioning. It includes an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR), an end-position adjusting range of -5 to 5 degrees at 0° and 85 to 95 degrees at the nominal angle, a 49.5 mm shaft connection depth, and closes to the right with position sensing rated up to SIL 2 low demand mode alongside ATEX and UKCA explosion protection markings. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 549431 is an industrial component featuring a planetary gear set with a 5:1 gear ratio, a 60 mm gearbox flange size, and a 57 mm motor flange size. This unit delivers a continuous output torque of 22 Nm, a maximum output torque of 35.2 Nm, a maximum actuator speed of 13,000 rpm, and a maximum efficiency of 98 percent while maintaining a torsional backlash of 0.17 degrees. Built with an IP54 degree of protection, a mass moment of inertia of 0.078 kgcm², a torsional rigidity of 2.3 Nm/arcmin, and RoHS-compliant materials, the 900 g assembly operates within temperatures from -25 °C to 90 °C and withstands permissible axial and radial shaft loads of 500 N and 400 N, respectively. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 547309 is a 3/2-way closed, monostable industrial component featuring a 10 mm valve size and a piston gate valve structural design. Operating on 24V DC with a normal nominal flow rate of 170 l/min, it utilizes a piloted type of control with an external pilot air supply port operating at 0.3 MPa to 0.7 MPa and an operating pressure range of -0.09 MPa to 0.7 MPa (-0.9 bar to 7 bar). This unit includes a soft sealing principle, positive overlap, pneumatic spring reset, non-reversible non-throttled exhaust air function, IP40 degree of protection, LED signal status display, QS-3 pneumatic working ports, and both detenting and non-detenting manual override options for any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 549430 is an industrial planetary gear set featuring a 60 mm gearbox flange size, a 57 mm motor flange size, and a 3:1 gear ratio. Weighing 900 g, this RoHS compliant component delivers a continuous output torque of 22 Nm, a maximum output torque of 35.2 Nm, a mass moment of inertia of 0.135 kgcm², and a maximum actuator speed of 13000 rpm with 98% maximum efficiency. It operates within a temperature range of -25 °C to 90 °C, providing an IP54 degree of protection, VDMA24364-B2-L LABS conformity, 0.17 degrees of torsional backlash, and 2.3 Nm/arcmin torsional rigidity while supporting permissible axial and radial shaft loads of 500 N and 400 N respectively through its 60G output shaft and 57A actuator interfaces. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 549669 is a double-acting industrial component featuring a kinematic yoke system with a size 1440 valve actuator and an F14 flange hole pattern. It provides a 90-degree swivel angle, an end-position adjusting range at 0° from -1° to 9° with a 38.5 mm depth shaft connection, and operates at pressures between 0.1 MPa and 0.84 MPa with a nominal operating pressure of 0.56 MPa. Certified for use in ATEX Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas, this un-cushioned unit achieves up to SIL 2 low demand mode safety integrity levels and conforms to ISO 5211 and VDI/VDE 3845 (NAMUR) valve connection standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 547308 is an electrical piston gate valve featuring a 2/2-way closed monostable function, a 10 mm valve size, and a normal nominal flow rate of 150 l/min normalized to DIN 1343. Operating at 24V DC with an operating pressure range of -0.09 MPa to 0.7 MPa and an external pilot air supply port requiring 0.3 MPa to 0.7 MPa, this component utilizes a soft sealing principle, a pneumatic spring reset method, and a QS-3 pneumatic working port. Additional specifications include IP40 protection, detenting and non-detenting manual override, positive overlap lap, an LED signal status display, and an unthrottlable exhaust air function for non-reversible flow in any mounting position. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 549429 is an industrial planetary gear set featuring a 40 mm gearbox flange size, a 42 mm motor flange size, and a 5:1 gear ratio designed for a max actuator speed of 18000 rpm. This component delivers a continuous output torque of 14 Nm, a max output torque of 22 Nm, and operates within a temperature range of -25 °C to 90 °C while maintaining an IP54 degree of protection. Weighing 350 g, the unit incorporates a 40G output shaft interface, a 42A actuator interface, and exhibits a torsional backlash of 0.25 deg with 98% max efficiency. Submit the exact part number, quantity, and application requirements to request a quote for this part.
View product details →
Festo
The Festo 549668 is a double-acting industrial component featuring a kinematic yoke system with a size 1440 valve actuator and an F12 flange hole pattern. Operating at a nominal pressure of 0.56 MPa (5.6 bar) within a 0.1 MPa to 0.84 MPa range, this un-cushioned unit delivers a 90-degree swivel angle with a 0-degree end-position adjusting range from -1 degree to 9 degrees and a maximum swivel frequency of 1 Hz at 6 bar. It incorporates an ISO 5211 standard valve connection, a VDI/VDE 3845 (NAMUR) compliant interface, a 38.5 mm shaft connection depth, right-closing direction, and ATEX/UKCA certifications for explosion protection in Zones 1, 2, 21, and 22 alongside SIL 2 low demand mode capabilities. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 549428 is an industrial planetary gear set featuring a 3:1 gear ratio, a 40 mm gearbox flange size, and a 42 mm motor flange size. This component delivers a continuous output torque of 11 Nm, a maximum output torque of 17.6 Nm, a maximum actuator speed of 18000 rpm, and a torsional backlash of 0.25 deg with a torsional rigidity of 1 Nm/arcmin. Built with an IP54 degree of protection, a VDMA24364-B2-L LABS conformity, RoHS-compliant materials, and an operating temperature range of -25 °C to 90 °C, the unit weighs 350 g and achieves a maximum efficiency of 98 %. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 547307 is an electrical 10 mm piston gate valve featuring a bistable 5/2-way function and a soft sealing principle. It delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports, operating at pressures ranging from -0.9 bar to 7 bar with a 24V DC operating voltage. Equipped with an IP40 degree of protection, positive overlap lap, and LED signal status display, this component supports both detenting and non-detenting manual override. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 549667 is a double-acting industrial component utilizing a kinematic yoke system with a 0720 size valve actuator and a 90-degree swivel angle. It features an F10 and F12 flange hole pattern, an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR), an un-cushioned 29.5 mm shaft connection depth, and an operating pressure range of 1 bar to 8.4 bar at a nominal operating pressure of 5.6 bar. Rated for up to SIL 2 low demand mode and certified with ATEX and UKCA markings for explosion prevention and protection in Zone 1, Zone 2, Zone 21, and Zone 22, this unit operates at a maximum swivel frequency of 1 Hz at 6 bar with a -1 degree to 9 degree end-position adjusting range at 0 degrees, closes to the right, and supports any mounting position without position sensing. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo 547306 industrial component is a 5/2-way monostable piston gate valve featuring an electrical actuation type and a 10 mm valve size. It operates on 24V DC with an operating pressure range of -0.09 MPa to 0.7 MPa and delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports. The unit incorporates a soft sealing principle, external pilot air supply port, pneumatic spring reset method, and an integrated LED signal status display with IP40 protection. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 549666 is a double-acting industrial component featuring a kinematic yoke system with a size 0008 valve actuator, an F03 flange hole pattern, and a 90-degree swivel angle. Operating within a pressure range of 0.1 MPa to 0.84 MPa at a nominal operating pressure of 0.56 MPa, this unit includes an ISO 5211 standard valve connection, a 10.1 mm shaft connection depth, and closes to the right with no cushioning or position sensing. Certified by TÜV Nord under certificate 212170801, the device complies with EU ATEX and UK EX directives for explosion prevention in Zones 1, 2, 21, and 22, and supports safety integrity levels up to SIL 2 in low demand mode. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 547305 is a 10 mm electrical 3/2-way monostable open industrial component featuring a piston gate valve structural design and a soft sealing principle. Operating at 24V DC with an operating pressure range of -0.09 MPa to 0.7 MPa, this piloted unit delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports and includes an LED signal status display. Additional specifications comprise an external pilot air supply port, pneumatic spring reset method, IP40 degree of protection, and both detenting and non-detenting manual override options. Submit the exact part number, quantity, and application requirements to receive an RFQ.
View product details →
Festo
The Festo part number 549656 is an industrial component featuring a wrought aluminum alloy manifold rail supporting a maximum of 10 valve positions. Weighing 242 g, this RoHS compliant unit includes a G1/8 pneumatic connection 1, an M7 pneumatic connection 2, a G1/8 pneumatic connection 3, and an M3 pilot air port 12. It possesses a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 547304 is a 3/2-way closed monostable industrial component featuring a 10 mm piston gate valve design with a soft sealing principle and positive overlap. Operating at 24V DC with an operating pressure range of -0.9 bar to 7 bar and a normal nominal flow rate of 170 l/min, this piloted valve utilizes an external pilot air supply port alongside detenting and non-detenting manual override capabilities. It includes an IP40 degree of protection, a pneumatic spring reset method, an integrated LED signal status display, and M5 pneumatic working ports that support mounting in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 549655 is an industrial component featuring a wrought aluminum alloy manifold rail supporting a maximum of nine valve positions. This 222 g unit achieves corrosion resistance class 2 for moderate corrosion stress alongside VDMA24364-B2-L LABS conformity and RoHS material compliance. Pneumatic connections comprise G1/8 for ports 1 and 3, M7 for port 2, and an M3 pilot air port 12. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 547303 is an electrical 2/2-way closed monostable piston gate valve featuring a 10 mm valve size, an M5 pneumatic working port, and a normalized nominal flow rate of 150 l/min according to DIN 1343. Operating on 24V DC within a pressure range of -0.09 MPa to 0.7 MPa, this piloted component utilizes external pilot air supply, a soft sealing principle, positive overlap lap, and a pneumatic spring reset method. Additional technical features include IP40 protection, detenting and non-detenting manual override, an unthrottlable exhaust air function, non-reversible flow direction, and an LED signal status display for any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →