Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8203317
Push-in connector NPQO-D-Q10-E-P5
The Festo 8203317 is a straight industrial component featuring a 9 mm nominal width and a 20.1 mm tubing insertion depth utilizing a push-pull structural design for 10 mm outside diameter pneumatic tubing on both connections. This part operates with compressed air according to ISO 8573-1:2010 [7:4:4], inert gases, carbon dioxide, air, oxygen, and nitrogen, supporting an operating pressure of -0.9 bar to 3 bar across its full temperature range of 0 °C to 120 °C and up to 12 bar in temperature-dependent conditions. Built with a moderate corrosion stress rating and VDMA24364 Zone III LABS conformity, the 14.12 g unit is mountable in any position and complies with ISO 18562 biocompatibility, ASTM G 93 and ISO 15001 oxygen suitability, and a maximum hydrocarbon impurity level of 550 MGM. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8211836
Quarter turn actuator DFPD-6500-SY-Y-90-RD-F1625
The Festo size 6500 industrial component, part number 8211836, features a double-acting kinematic yoke system with an F1625 flange hole pattern and a 90-degree swivel angle. Operating at a nominal pressure of 5.5 bar with an 18 bar burst pressure, this unit includes standard ISO 5211 valve connections, VDI/VDE 3845 NAMUR compliance, and an ATEX CE marking. Certified for safety functions up to SIL 2 in low demand mode and SIL 3 in redundant architecture pursuant to ISO 13849 and IEC 61508, the device supports any mounting position and features adjustable end-positions from -5 to 5 degrees at both 0 degrees and the nominal swivel angle. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8198555
Solenoid valve VSVA-B-B52-H-D1-F8
The Festo 8198555 is an electrical 5/2-way bistable industrial component featuring a piston gate valve structural design and a standardized 1800 l/min nominal flow rate according to ISO 8778. Built with a 42 mm width, soft sealing principle, positive overlap lap, and internal pilot air supply, this unit operates within a 3 bar to 10 bar pressure range while conforming to ISO 5599-1 standards for size 1 sub-base pneumatic working ports. It provides IP65 and NEMA 4 degrees of protection, a non-detenting manual override, adjustable exhaust air function via individual sub-base, and supports any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8203316
Push-in connector NPQO-D-Q8-Q6-P10
The Festo part number 8203316 is a straight industrial component featuring a push-pull structural design with a nominal width of 5 mm and a tubing insertion depth of 17.6 mm for an 8 mm outside diameter pneumatic tubing connection. It operates with compressed air as per ISO 8573-1:2010 [7:4:4], inert gases, carbon dioxide, air, oxygen, and nitrogen across a medium temperature range of 0 °C to 120 °C and an ambient temperature range of 0 °C to 60 °C. This pack size of 10 components supports an operating pressure of -0.09 MPa to 0.3 MPa across the entire temperature range and -0.09 MPa to 1.6 MPa depending on temperature, while offering moderate corrosion stress resistance with a CRC rating of 2. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8192303
Ball screw axis ELGD-BS-KF-120-800-0H-10P
The Festo 8192303 is an electromechanical linear axis featuring a size 120 structural design with an 800 mm working stroke and a recirculating ball bearing guide. Equipped with a ball screw of 25 mm diameter, 10 mm/U spindle pitch, and ±0.02 mm reversing backlash, this unit operates at a maximum speed of 0.5 m/s, a maximum rotational speed of 3200 rpm, and a repetition accuracy of ±0.01 mm with a 100% duty cycle. It accommodates stepper or servo motors in any mounting position, provides position sensing for inductive sensors, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) while conforming to VDMA24364-C1-L LABS standards. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
8211835
Quarter turn actuator DFPD-9500-SY-Y-90-RD-F1625
The Festo part number 8211835 is a double-acting industrial component featuring a kinematic yoke system with a 9500 valve actuator size, an F1625 flange hole pattern, and a 90-degree swivel angle. Operating within a pressure range of 3 bar to 4.6 bar (43.5 psi to 66.7 psi) and certified for safety functions to ISO 13849 and IEC 61508, this unit supports SIL 2 low demand mode or SIL 3 in a redundant architecture. It incorporates an ISO 5211 standard valve connection, a VDI/VDE 3845 NAMUR valve connection, and a VDI/VDE 3845 Size AA 3 connection point for positioners and position sensors. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8198554
Solenoid valve VSVA-B-M52-AH-D1-F8
The Festo part number 8198554 is an electrical 5/2-way monostable industrial component utilizing a piston gate valve structural design with a nominal width of 8 mm and a 42 mm width. Featuring an ISO 5599-1 size 1 sub-base pneumatic working port, this piloted valve delivers a standardized nominal flow rate of 1800 l/min according to ISO 8778 across an operating pressure range of 3 bar to 10 bar. It includes internal pilot air supply, a pneumatic spring reset method, soft sealing, adjustable exhaust air via individual sub-base, non-detenting manual override, and IP65 and NEMA 4 degree of protection ratings. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
8203315
Push-in connector NPQO-D-Q8-E-P10
This straight-design industrial component from Festo features a 7 mm nominal width and a push-pull structural design with an 17.85 mm tubing insertion depth for 8 mm outside diameter pneumatic tubing connections. Operating with compressed air, inert gases, carbon dioxide, air, oxygen, and nitrogen, the unit handles temperature-dependent operating pressures up to 1.6 MPa and handles full-temperature operating pressures down to -0.09 MPa across medium temperatures of 0 °C to 120 °C. The 9.19 g pack size of 10 components achieves CRC 2 moderate corrosion stress resistance and complies with VDMA24364 Zone III LABS conformity, ISO 18562 biocompatibility, and ASTM G 93 and ISO 15001 oxygen suitability standards. Submit part number 8203315, required quantity, and application requirements to request a quote.
View product details →
IMI-Norgren
QM/162063/00
IMI-Norgren QM/162063/00 — Verschleißteilsätze
The IMI-Norgren QM/162063/00 is an industrial component manufactured by IMI-Norgren with a part number of QM/162063/00 and an unstated GTIN-13. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this IMI-Norgren part.
View product details →Filtration Group
70517051
Filtration Group 70517051 — Filter Element
The Filtration Group 70517051 is a filter element featuring a filtration rating of 25 µm. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8192302
Ball screw axis ELGD-BS-KF-120-600-0H-10P
The Festo 8192302 is an electromechanical linear axis featuring a size 120 structural design with an integrated ball screw and a 600 mm working stroke. Engineered with a recirculating ball bearing guide, a 25 mm screw diameter, and a 10 mm/U spindle pitch, this unit delivers a repetition accuracy of ±0.01 mm, a ball screw reversing backlash of ±0.02 mm, and a maximum speed of 0.5 m/s at a 100% duty cycle. It supports any mounting position, accommodates stepper or servo motors, includes position sensing for inductive sensors with an incremental linear potentiometer measuring principle, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) under VDMA24364-C1-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8211834
Quarter turn actuator DFPD-3500-RP-90-RD-F16
The Festo industrial component, part number 8211834, is a double-acting gear rack and pinion valve actuator featuring a size 3500 designation and an F16 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle, alongside an ISO 5211 standard valve connection and a 50 mm shaft connection depth. Operating within a pressure range of 2 bar to 6.8 bar and a nominal operating pressure of 5.5 bar, this unit achieves a burst pressure of 20.43 bar and includes ATEX CE marking as per the EU explosion protection directive. Furthermore, the actuator supports functional safety up to SIL 2 in low demand mode and SIL 3 in a redundant architecture, certified to ISO 13849 and IEC 61508 standards with VDI/VDE 3845 NAMUR and VDI/VDE 3845 Size AA 3 compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8203314
Push-in connector NPQO-D-Q6-Q4-P10
The Festo part number 8203314 is an industrial component featuring a straight design and a nominal width of 3 mm with a push-pull structural principle for pneumatic tubing outside diameter 6 mm. It operates with compressed air as per ISO 8573-1:2010 [7:4:4], inert gases, carbon dioxide, air, oxygen, and nitrogen across a temperature range of 0 °C to 120 °C, supporting an operating pressure from -0.09 MPa to 0.3 MPa and temperature-dependent operating pressure up to 1.6 MPa. Each pack size contains 10 units, weighing 6.37 g each, with a corrosion resistance class of 2 and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8198553
Solenoid valve VSVA-B-M52-MH-D1-F8
The Festo 8198553 is a 5/2-way monostable industrial component featuring an electrical actuation type, piloted control with internal pilot air supply, and a piston gate valve structural design with a mechanical spring reset method. This 42 mm wide component conforms to ISO 5599-1 with a size 1 sub-base pneumatic working port, a nominal width of 8 mm, a standardized nominal flow rate of 1800 l/min according to ISO 8778, and an operating pressure range of 0.3 MPa to 1 MPa (3 bar to 10 bar). It incorporates a soft sealing principle, positive overlap lap, non-detenting manual override, adjustable exhaust air function via individual sub-base, non-reversible flow direction, and an IP65 / NEMA 4 degree of protection for installation in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
8192301
Ball screw axis ELGD-BS-KF-120-500-0H-10P
The Festo 8192301 is an electromechanical linear axis featuring a size 120 structural design with a ball screw, 500 mm working stroke, 25 mm screw diameter, and 10 mm/U spindle pitch. This component operates with a recirculating ball bearing guide, ball screw reversing backlash of ±0.02 mm, repetition accuracy of ±0.01 mm, max. speed of 0.5 m/s, max. acceleration of 15 m/s², and max. rotational speed of 3200 rpm while supporting a 100% duty cycle in any mounting position. Configured for stepper or servo motors with incremental linear potentiometer measurement and position sensing for inductive sensors, the unit meets VDMA24364-C1-L LABS conformity and is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8211030
Suction cup with connection OGVM-125-A-N-G38F
Engineered with a 125 mm round protective bellows 1.5-fold shape and 32 mm suction cup height compensation, this Festo industrial component provides a nominal width of 8 mm, a suction cup volume of 241 cm³, and a product weight of 183 g in black. Operating within a pressure range of -95 kPa to 0 kPa and a nominal operating pressure of -60 kPa, it delivers a holding force of 587 N and a lateral force of 426 N for a minimum workpiece radius of 140 mm. Featuring a G3/8 internal thread vacuum connection with an upward connection position, the unit mounts in any position, operates in ambient temperatures from -20 °C to 80 °C using atmospheric air based on ISO 8573-1:2010 [7:-:-], and meets CRC 2 moderate corrosion stress alongside VDMA24364-A1/A2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8203313
Push-in connector NPQO-D-Q6-E-P10
The Festo 8203313 is a straight industrial component featuring a 5 mm nominal width and a push-pull structural design with a 15.6 mm tubing insertion depth for 6 mm outside diameter pneumatic tubing on both connections. It operates with compressed air according to ISO 8573-1:2010 [7:4:4], inert gases, carbon dioxide, air, oxygen, and nitrogen across an ambient temperature range of 0 °C to 60 °C and a medium temperature range of 0 °C to 120 °C. This pack of 10 components weighs 6.43 g each, offers a corrosion resistance class of 2, and adheres to VDMA24364 Zone III LABS conformity, ISO 18562 biocompatibility, and ASTM G 93 and ISO 15001 oxygen suitability standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8198552
Solenoid valve VSVA-B-T22C-MZD-D1-F8
The Festo 8198552 is an electrically actuated industrial component featuring a 2x2/2 closed, monostable valve function and a piston gate valve structural design with a soft sealing principle. This piloted valve conforms to ISO 5599-1 with a size 1 sub-base pneumatic working port, an 8 mm nominal width, and a standardized nominal flow rate of 1700 l/min according to ISO 8778. It offers an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar), an IP65 and NEMA 4 degree of protection, a mechanical spring reset method, and a detenting manual override. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
IMI-Norgren
MC225MH
IMI-Norgren MC225MH — Stossdämpfer (1 item)
The IMI-Norgren MC225MH is an industrial component designated by the official product name MC225MH STOSSDÄMPFER M20X1,5. This part features an M20x1,5 specification as detailed in the manufacturer nomenclature. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8203312
Push-in connector NPQO-D-Q4-E-P10
The Festo 8203312 is a straight industrial component featuring a 3 mm nominal width and a push-pull structural design with a 14.8 mm tubing insertion depth for 4 mm outside diameter pneumatic tubing on both connections. This part operates with compressed air, inert gases, carbon dioxide, air, oxygen, and nitrogen, supporting a temperature-dependent operating pressure from -0.09 MPa to 1.6 MPa and a medium temperature range of 0 °C to 120 °C. Supplied in a pack size of 10 with a product weight of 4.76 g each, it achieves a CRC 2 corrosion resistance class and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →