Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8122807
Media separated solenoid valve VYKB-F10-M32-16-PE-5HPA
Festo part number 8122807 is an electrical rocker valve featuring a diaphragm seal with a soft sealing principle and side electrical connection via a cable with a plug featuring connection pattern HP. This 3/2 monostable directly controlled valve has a 1.6 mm nominal width, a non-reversible flow direction, a mechanical spring reset, and contains EPDM and PEEK media-contacting materials with an internal volume of 35 µl. Designed for gaseous and liquid media within a 0 °C to 50 °C medium temperature range, it incorporates a flange fluid connector, has no manual override, and mounts using a through-hole for an M2 screw in any mounting position while requiring a maximum particle size of 5 µm based on material resistance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118960
Guided drive DFM-63-200-P-A-KF-F1A
This Festo industrial component, part number 8118960, is a double-acting guide drive unit with a 63 mm piston diameter, a 200 mm stroke, and a yoke operating mode. It features a recirculating ball bearing guide, elastic cushioning rings or pads at both ends, position sensing via proximity switch, and accommodates an operating pressure from 1 bar to 10 bar at a maximum speed of 0.6 m/s in any mounting position. The unit operates with compressed air as per ISO 8573-1:2010 [7:4:4], allows oil lubrication, meets VDMA24364-B1/B2-L LABS conformity, achieves ISO 14644-1 cleanroom class 6, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8129245
PROFINET Interface CPX-AP-A-PN-CU
The Festo 8129245 industrial component features dimensions of 50.1 mm x 107.3 mm x 94.2 mm including the interlinking block, a width of 50.1 mm, and a product weight of 167 g with screwed-on mounting in any position. It operates within an ambient temperature of -20 °C to 50 °C subject to IEC 61131-2:2017 derating, supports up to 80 modules, and achieves protection class III with a contamination level of 2 under low corrosion stress (CRC 1). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8117047
Standards-based cylinder DSNA-N-4"- -
This Festo double-acting industrial component features a 4" piston diameter, adjustable pneumatic cushioning at both ends, and a configurable stroke ranging from 0.25 to 48 inches that operates within a pressure range of 6.96 to 139.925 psi. Built with a tie rod structural design conforming to the NFPA/T3.6.7 standard, it accommodates any mounting position and provides position sensing via proximity switch. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8122806
Media separated solenoid valve VYKB-F10-M22C-16-PF-1HPA
The Festo 8122806 is a directly controlled 2/2-way closed monostable rocker valve featuring a soft sealing principle and a 1.6 mm nominal width. Designed with FFPM and PEEK media-contacting materials, this size 10 component supports both liquid and gaseous media within a 0 °C to 50 °C temperature range and accommodates a maximum particle size of 5 µm. It utilizes an electrical side connection with a cable and plug featuring connection pattern HP, a mechanical spring reset, and through-hole mounting for an M2 screw in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this industrial component.
View product details →Filtration Group
77687619
Filtration Group 77687619 — Filter Element
The Filtration Group 77687619 (FILTERELEMENT 852 493 SMX 10 / 356208) is an industrial component featuring a 10 µm filtration rating and a glasfaser filter element material. This replacement element operates with a permissible differential pressure of 20 bar. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
8118959
Guided drive DFM-63-160-P-A-KF-F1A
The Festo part number 8118959 is a double-acting industrial drive unit featuring a yoke structural design with a 63 mm piston diameter and a 160 mm stroke. Engineered with a recirculating ball bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, this component operates at pressures from 1 bar to 10 bar with a maximum speed of 0.6 m/s. It utilizes compressed air as per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -5 °C to 60 °C, supports oil lubrication, and maintains ISO 14644-1 Class 6 cleanroom suitability with reduced Cu/Zn/Ni values for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Rehau
PC 17,6X13
Rehau PC 17,6X13 — PC special pneumatic hose 17,6 x 13 mm of Rehau
The Rehau PC 17,6X13 is a special pneumatic hose featuring dimensions of 17,6 x 13 mm and is identified by GTIN 4050571543297. This official Rehau industrial component is designated under the official product name PC special pneumatic hose 17,6 x 13 mm of Rehau. Submit your exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8117046
Standards-based cylinder DSNA-N-3 1/4"- -
The Festo 8117046 is a double-acting industrial component featuring a 3 1/4" piston diameter, an adjustable pneumatic cushioning at both ends, and an operating pressure range of 6.96 psi to 139.925 psi. Built with a tie rod structural design conforming to NFPA/T3.6.7 standards, this unit supports strokes from 0.25 in to 48 in and enables position sensing via proximity switch. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] in any mounting position across a temperature range of -5 to 80°C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8129244
EtherNet/IP interface CPX-AP-A-EP-M12
The Festo industrial component, part number 8129244, features dimensions of 50.1 mm x 107.3 mm x 57.5 mm including the interlinking block, a width dimension of 50.1 mm, and a product weight of 113 g. This module supports a maximum of 80 modules, utilizes screwed-on mounting in any position, and operates within an ambient temperature range of -20 °C to 50 °C subject to IEC 61131-2:2017 derating. It is rated for protection class III, contamination level 2, and low corrosion stress (CRC 1), with specified tolerances for storage, vibration, shock, altitude up to 3500 m, and relative air humidity from 5 to 95% non-condensating. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8122805
Media separated solenoid valve VYKB-F10-M22C-16-PV-1HPA
The Festo 8122805 is a 2/2-way closed, monostable industrial component featuring a rocker valve with a diaphragm seal and a soft sealing principle. Designed with an electrical connection at the side via a cable with a plug, it utilizes direct electrical actuation and a mechanical spring reset to control gaseous and liquid media through a 1.6 mm nominal width and flange fluid connector. Its wetted materials consist of PEEK and FPM, housing an internal volume of 35 µl while operating within a medium temperature range of 0 °C to 50 °C and accommodating a maximum particle size of 5 µm. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
8118958
Guided drive DFM-63-125-P-A-KF-F1A
The Festo 8118958 is a double-acting industrial drive unit featuring a 63 mm piston diameter, a 125 mm stroke, and a yoke drive mode with a 50 mm payload center of gravity distance to the yoke plate. This guide structural design incorporates a recirculating ball bearing, elastic cushioning rings or pads at both ends, position sensing via proximity switch, and operates at pressures from 0.1 MPa to 1 MPa with a maximum speed of 0.6 m/s in any mounting position. Operating on compressed air complying with ISO 8573-1:2010 [7:4:4], the unit accommodates oil lubrication and meets ISO 14644-1 cleanroom Class 6 as well as VDMA24364-B1/B2-L LABS conformity with reduced Cu/Zn/Ni values for Li-ion battery production. Submit your exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
8117045
Standards-based cylinder DSNA-N-2 1/2"- -
The Festo 8117045 is a double-acting industrial component featuring a 2 1/2" piston diameter, an adjustable pneumatic cushioning system at both ends, and a stroke range from 0.25 to 48 inches that conforms to NFPA/T3.6.7 standards. Operating within a pressure range of 6.96 to 139.925 psi (0.048 to 0.965 MPa), this unit supports compressed air per ISO 8573-1:2010 [7:4:4] and permits oil-lubricated operation. Position sensing is achieved via proximity switch across an operating temperature range of -5 to 80°C with a corrosion resistance class of CRC 1. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8122804
Media separated solenoid valve VYKB-F10-M22C-16-PE-1HPA
The Festo part number 8122804 is an electrical direct-controlled 2/2-way closed monostable rocker valve featuring a soft sealing principle, a diaphragm seal, and a size 10 structural design with side electrical connections via a cable with a plug. Engineered with EPDM and PEEK media-contacting materials, a 1.6 mm nominal width, and a non-reversible flow direction, this component accommodates both liquid and gaseous media within a medium temperature range of 0 °C to 50 °C, subject to media resistance and a maximum particle size of 5 µm. It includes a 35 µl internal volume, a mechanical spring reset method, no manual override, and flange fluid connectors, while supporting mounting via through-holes for M2 screws in any position. Submit the exact part number, quantity, and application requirements to request a quote for this industrial component.
View product details →
Festo
8129243
EtherCAT interface CPX-AP-A-EC-M12
The Festo part number 8129243 is an industrial component measuring 50.1 mm in width, 107.3 mm in length, and 57.5 mm in height including the interlinking block, with a total product weight of 113 g. Designed for screwed-on mounting in any position, it accommodates a maximum of 80 modules and operates within an ambient temperature range of -20 °C to 50 °C subject to IEC 61131-2:2017 derating. This Class III component features a corrosion resistance class of 1, a contamination level of 2, and withstands specified vibration and shock resistance levels up to 30 g/11 ms for direct mounting or DIN rail configurations. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8118957
Guided drive DFM-63-100-P-A-KF-F1A
The Festo 8118957 industrial component features a 63 mm piston diameter, a 100 mm stroke, and a yoke drive unit operating mode with a recirculating ball bearing guide. Designed for double-acting operation with compressed air, it functions at operating pressures between 1 bar and 10 bar, achieves a maximum speed of 0.6 m/s, and incorporates elastic cushioning rings at both ends with position sensing via proximity switch. The unit meets ISO 14644-1 Cleanroom Class 6 standards and VDMA24364-B1/B2-L LABS conformity, with restricted use of copper, zinc, and nickel, making it suitable for specific battery production environments. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8117044
Standards-based cylinder DSNA-N-2"- -
The Festo 8117044 double-acting industrial component features a 2-inch piston diameter, an adjustable pneumatic cushioning at both ends, and a stroke length ranging from 0.25 to 48 inches that conforms to the NFPA/T3.6.7 standard. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 12.905 psi to 139.925 psi, this unit supports any mounting position and includes position sensing via a proximity switch. Submit the exact part number, quantity, and application requirements for a quote.
View product details →Filtration Group
77687601
Filtration Group 77687601 — Industrial Component
The Filtration Group 77687601 (Manufacturer Model: Filterelement 852493MIC25 852493MIC25 RMR493L20B HY 15512 RL-005-L-20-B) is an industrial component featuring a 25 µm filtration rating. This filter element operates within a permissible differential pressure of 20 bar. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
8122803
Media separated solenoid valve VYKB-F10-M22C-16-PF-5HPA
The Festo 8122803 is a size 10 industrial component featuring a 2/2-way, closed, monostable valve function with a soft sealing principle and a 1.6 mm nominal width. This directly controlled, electrically actuated rocker valve with a diaphragm seal incorporates FFPM and PEEK media-contacting materials, a non-reversible flow direction, and a side electrical connection utilizing a cable with plug in connection pattern HP. Designed with an internal volume of 35 µl, it accommodates both liquid and gaseous media within a medium temperature range of 0 °C to 50 °C and mounts via a through-hole for an M2 screw in any position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8129241
PROFINET Interface CPX-AP-A-PN-M12
The Festo part number 8129241 is an industrial component with dimensions of 50.1 mm width, 107.3 mm length, and 57.5 mm height including the interlinking block, weighing 108 g with a screwed-on mounting type supporting up to 80 modules in any mounting position. It operates within an ambient temperature of -20 °C to 50 °C, a storage temperature of -20 °C to 70 °C, 5% to 95% non-condensing relative air humidity, a nominal altitude of use up to 2000 m ASL, and a max installation height of 3500 m, requiring ambient temperature derating according to IEC 61131-2:2017 for altitudes above 2000 m ASL. Featuring a corrosion resistance class of 1, protection class III, contamination level 2, along with specified vibration and shock resistance ratings as per EN 60068 and FN standards, this unit provides defined mechanical and environmental tolerances. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →