Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 534533 is an electrical 2x3/2 open monostable industrial component featuring a piston gate valve structural design with soft sealing and a pneumatic spring reset method. Measuring 26 mm in width and conforming to ISO 15407-1 standards for its sub-base size 26 mm pneumatic working port, this 24V DC unit delivers a normal nominal flow rate of 900 l/min across an operating pressure range of 0.3 MPa to 0.8 MPa. It achieves IP65 and NEMA 4 degrees of protection while carrying RCM, c UL us, CE, and UKCA compliance markings. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 533475 is a double-acting industrial component featuring a kinematic yoke system with a 0015 valve actuator size and a 90-degree swivel angle. It operates within a pressure range of 0.1 MPa to 0.84 MPa (1 bar to 8.4 bar) at a nominal operating pressure of 0.56 MPa (5.6 bar), offering an F04 flange hole pattern and VDI/VDE 3845 (NAMUR) valve connection compliance. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention with SIL 2 low demand mode capabilities, this unit includes no cushioning or position sensing and mounts in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 535617 is an electrical, monostable 3/2-way closed on/off valve featuring a mechanical spring reset and non-reversible flow direction. Powered by 230 V AC at 50/60 Hz with class H insulation, this component operates across a pressure range of -0.09 MPa to 0.8 MPa and supports a 100% duty cycle with IP66 protection. Certified for explosive atmospheres with ATEX, IEC-Ex, and CCC-Ex ratings, it includes a detenting manual override and complies with EU explosion protection directives. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 535616 is an electrical 3/2-way closed, monostable on/off valve featuring a mechanical spring reset and non-reversible flow direction. Engineered for a 100% duty cycle, this component operates across a pressure range of -0.09 MPa to 0.8 MPa and runs on 110 V AC at 50/60 Hz with class H insulation. It holds IP66 protection, detenting manual override, and comprehensive ATEX, IEC-Ex, and CCC-Ex certifications for explosive gas and dust environments. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 533467 is a blue industrial component featuring a working length of 6 m, an outside diameter of 12.4 mm, an inside diameter of 8 mm, and 53 windings with a winding diameter of 51 mm. This part operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -40 °C to 60 °C, supporting an operating pressure of -0.095 MPa to 0.9 MPa for the entire temperature range and -0.095 MPa to 1.3 MPa under temperature-dependent conditions. It is equipped with G3/8 external threads on both pneumatic connections, exhibits a nominal tightening torque of 13 Nm with a ±20% tolerance, and weighs 560 g with a corrosion resistance class of 1 and Shore hardness of A 87 +/-3. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 534532 is a 26 mm wide industrial component featuring a 2x3/2 closed, monostable valve function and a piston gate valve structural design with a soft sealing principle. Operating at 24V DC with an operating pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), this electrical-actuation unit delivers a normal nominal flow rate of 900 l/min through an ISO 15407-1 size 26 mm sub-base pneumatic working port. It incorporates a pneumatic spring reset method, non-detenting manual override, adjustable exhaust air function via a throttle plate or individual sub-base, and an IP65 and NEMA 4 degree of protection while carrying RCM, c UL us, CE, and UKCA compliance marks. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 535615 is a 3/2-way closed monostable electrical on/off valve featuring a mechanical spring reset and non-reversible flow direction. Engineered with IP66 protection, Class H insulation, and a 24 V DC 3.0 W coil operating at 100% duty cycle, this component supports pressures from -0.09 MPa to 0.8 MPa and includes a detenting manual override. It carries ATEX, IEC-Ex, and CCC-Ex certifications for explosive gas and dust environments with specified ambient temperature ranges up to -65°C to +55°C. Submit the exact part number, quantity, and application requirements to receive an RFQ quote.
View product details →
Festo
The Festo 533466 is an industrial component featuring a blue exterior, a working length of 4.8 m, an outside diameter of 12.4 mm, an inside diameter of 8 mm, and 41 windings with a winding diameter of 51 mm and block length of 1.176 m. This part operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -40 °C to 60 °C, supporting an operating pressure of -0.095 MPa to 0.9 MPa for the entire temperature range and -0.095 MPa to 1.3 MPa under temperature-dependent conditions. Equipped with external thread G3/8 pneumatic connections on both ends, it features a shore hardness of A 87 +/-3 and D 50 +/-3, a nominal tightening torque of 13 Nm with a ±20% tolerance, a bending radius relevant for flow rate of 65 mm, a CRC rating of 1, LABS conformity VDMA24364-B1/B2-L, and a product weight of 480 g. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 534531 is an electrical 5/3-way pressurized industrial component featuring a piston gate valve design with a soft sealing principle and a 26 mm width. Operating on 24V DC within an operating pressure range of -0.09 MPa to 1.6 MPa, it delivers a normal nominal flow rate of 1000 l/min and conforms to ISO 15407-1 standards with an IP65 and NEMA 4 degree of protection. This unit includes a mechanical spring reset method, non-detenting manual override, and adjustable exhaust air function via a throttle plate or individual sub-base, supported by RCM, c UL us, CE, and UKCA compliance markings. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 535614 is a 3/2-way, closed, monostable electrical industrial component featuring a mechanical spring reset and a non-reversible flow direction. This on/off valve operates within a pressure range of -0.09 MPa to 0.8 MPa (-0.9 bar to 8 bar, -13.05 psi to 116 psi) and includes a detenting manual override, an IP65 degree of protection, and a 100% duty cycle with insulation class H. It carries CE marking per the EU explosion protection directive (ATEX) alongside international certifications including EPL Da, EPL Db, EPL Ga, and EPL Gb, with ignition protection types rated for specific explosive ambient temperatures ranging from -40°C to 65°C at a maximum input voltage of 31 V and input power of 2.98W. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component (Part Number 533465) is a blue pneumatic part featuring a working length of 6 m, an outside diameter of 10 mm, an inside diameter of 6 mm, and 66 windings with a winding diameter of 42 mm. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -40 °C to 60 °C, supporting an operating pressure of -0.095 MPa to 1 MPa for the entire temperature range and up to 1.5 MPa in temperature-dependent conditions. Equipped with G1/4 external thread pneumatic connections on both ends, the 430 g assembly exhibits a block length of 1.323 m, a bending radius relevant for flow rate of 50 mm, and a nominal tightening torque of 10 Nm with a ±20% tolerance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 534530 is a 26 mm wide electrical 5/3 exhausted piston gate valve featuring a soft sealing principle and a nominal width of 9 mm. Operating at 24V DC within a pressure range of -0.9 bar to 16 bar, this component achieves a normal nominal flow rate of 1000 l/min and conforms to ISO 15407-1 with an IP65 and NEMA 4 degree of protection. It includes mechanical spring reset, non-detenting manual override, and adjustable exhaust air functions, backed by RCM, c UL us, CE, and UKCA compliance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 533464, is a blue pneumatic part featuring a 4.8 m working length, a 10 mm outside diameter, a 6 mm inside diameter, and external thread G1/4 connections on both ends. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -40 °C to 60 °C, supporting an operating pressure of -0.095 MPa to 1 MPa over the entire temperature range and up to 1.5 MPa in temperature-dependent conditions. The unit has a block length of 1.17 m, a 50 mm bending radius relevant for flow rate, a 42 mm winding diameter, 50 windings, a nominal tightening torque of 10 Nm with a ±20% tolerance, a Shore hardness of A 87 +/-3 and D 50 +/-3, a corrosion resistance class of CRC 1, VDMA24364-B1/B2-L LABS conformity, and a product weight of 340 g. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 534529 is a 26 mm wide electrical 5/3-way closed piston gate valve featuring a soft sealing principle and a mechanical spring reset method. This component delivers a normal nominal flow rate of 1000 l/min across an operating pressure range of -0.09 MPa to 1.6 MPa, and operates on 24V DC with an IP65 and NEMA 4 degree of protection. Featuring an ISO 15407-1 sub-base pneumatic working port size of 26 mm, non-detenting manual override, and adjustable exhaust air function, the unit carries RCM, c UL us, CE, and UKCA compliance markings. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 533463, is a blue pneumatic part featuring a 2.4 m working length, a 10 mm outside diameter, a 6 mm inside diameter, a 0.891 m block length, and 21 windings with a 42 mm winding diameter. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -40 °C to 60 °C, supporting an operating pressure from -0.095 MPa to 1 MPa and a temperature-dependent operating pressure up to 1.5 MPa. Equipped with external thread G1/4 pneumatic connections on both ends, the 275 g assembly achieves a nominal tightening torque of 10 Nm with a ±20% tolerance, a Shore hardness of A 87 +/-3 and D 50 +/-3, a bending radius relevant for flow rate of 50 mm, a CRC rating of 1, and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 535586 size 10 sensor rail features a structural design assembled with structural adhesive and is RoHS compliant. This industrial component accommodates any mounting position and operates within an ambient temperature range of 5 °C to 60 °C. It provides a corrosion resistance class of 2 for moderate corrosion stress alongside VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 533462 is a single-acting industrial component featuring a 0960 valve actuator size, an F14 flange hole pattern, and a kinematic yoke system structural design. It operates with a 90-degree swivel angle, closes to the right, and provides an end-position adjusting range from -1 degree to 9 degrees at 0 degrees and from 81 degrees to 91 degrees at the nominal swivel angle, with one end position optionally adjustable. This un-cushioned unit operates at pressures from 5.6 bar to 8.4 bar, achieves a nominal operating pressure and spring force connection pressure of 5.6 bar, and delivers a maximum swivel frequency of 1 Hz at 6 bar while supporting up to SIL 2 low demand mode safety integrity levels. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 534528 is an electrical 24V DC piloted piston gate valve featuring a 5/2-way, dominant, bistable function with soft sealing and a non-detenting manual override. Built with a 26 mm width conforming to ISO 15407-1, this component delivers a normal nominal flow rate of 1100 l/min across an operating pressure range of -0.09 MPa to 1.6 MPa through a size 26 mm sub-base working port. It provides IP65 and NEMA 4 protection while carrying RCM, c UL us, CE, and UKCA compliance certifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 535585 is a size 10 sensor rail featuring a structural design held together with structural adhesive. It operates within an ambient temperature range of 5 °C to 60 °C and supports any mounting position. Featuring a corrosion resistance class of CRC 2 for moderate corrosion stress, the component includes materials compliant with VDMA24364-B2-L LABS conformity and RoHS standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 533461 is a single-acting industrial component featuring a size 0960 valve actuator with a kinematic yoke system structural design and an F14 flange hole pattern. It provides a 90-degree swivel angle with a closing direction to the right, operating within a pressure range of 0.42 MPa to 0.84 MPa and achieving a maximum swivel frequency of 1 Hz at 6 bar. This model includes an ISO 5211 standard valve connection, a VDI/VDE 3845 NAMUR standard connection for valves, and safety integrity level support up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →