Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo industrial component, part number 4822696, features a size 87 frame with a 114 mm center-to-center distance and a 1:1 gear ratio. This RoHS-compliant unit operates at a maximum rotational speed of 3000 rpm, delivering a transferable torque of 3 Nm and a no-load driving torque of 0.22 Nm with a mass moment of inertia of 44.4 kgmm². Weighing 1140 g, the assembly provides an IP40 degree of protection, VDMA24364 Zone III LABS conformity, an actuator interface code T46, and motor-in interface codes 80P, 80PA, or 80RA for any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 4154770 is a double-acting industrial guide drive unit featuring a 10 mm piston diameter, a 15 mm stroke, and a yoke drive mode with a plain-bearing guide. It operates on compressed air within a 0.15 MPa to 0.8 MPa pressure range, achieving a maximum speed of 1.7 m/s with elastic cushioning rings at both ends and position sensing via a proximity switch. This component maintains ISO 14644-1 Class 6 cleanroom suitability and a 1 - Low corrosion stress resistance class across an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 4820350 is an industrial component featuring a size 21 designation with a nominal length of 15 mm and holder diameters of 11 mm and 8 mm. This RoHS-compliant unit weighs 13.7 g, offers a transferable torque of 2 Nm, a mass moment of inertia of 0.45 kgmm², and supports a maximum rotational speed of 10000 rpm in any mounting position. It operates and is stored within a temperature range of -25 °C to 60 °C, accommodates 0 to 95% relative air humidity, and conforms to VDMA24364-B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 4500008 is a 20 mm wide industrial component featuring a directly controlled 3/2 open/closed monostable valve function with a plate seat structural design and soft sealing principle. Operating at pressures ranging from -0.095 MPa to 1 MPa (-0.95 bar to 10 bar), this manual-actuation device delivers a normal nominal flow rate of 870 l/min through G1/4 pneumatic working ports and incorporates an adjustable exhaust air function with a mechanical spring reset. Certified for ATEX Zone 1, 2, 21, and 22 explosion prevention, it uses ISO 8573-1:2010 [7:-:-] compressed air and permits oil lubrication. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component features a 10 mm piston diameter, a 10 mm stroke, and a yoke drive unit operating mode with elastic cushioning rings or pads at both ends. Designed with a plain-bearing guide and position sensing via proximity switch, the double-acting unit operates within a pressure range of 0.15 MPa to 0.8 MPa and achieves a maximum speed of 1.7 m/s using compressed air. The structural design maintains a 10 mm distance from the center of gravity of the payload to the yoke plate and accommodates an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 4820335 is an industrial component featuring a size 21 designation with a nominal length of 15 mm and holder diameters of 12 mm and 8 mm. This RoHS-compliant unit weighs 13.5 g, exhibits a mass moment of inertia of 0.45 kgmm², and supports a maximum rotational speed of 10000 rpm alongside a transferable torque of 2 Nm. Operating and storing within a temperature range of -25 °C to 60 °C and 0 to 95% relative air humidity, it conforms to VDMA24364-B2-L LABS standards and accommodates any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 4500007 is a 20 mm wide piston gate valve featuring a 5/2-way monostable valve function, manual actuation, and direct control with a reversible flow direction. Operating within a pressure range of -0.95 bar to 10 bar and delivering a nominal flow rate of 750 l/min through 1/8 NPT pneumatic working ports, this component includes an adjustable exhaust air function and pneumatic spring reset. Certified for ATEX Zone 1, 2, 21, and 22 explosive environments, the unit utilizes soft sealing and accepts compressed air as per ISO 8573-1:2010 [7:-:-] with oil lubrication supported. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 4154768 is a double-acting industrial guide component featuring a 10 mm piston diameter, a 5 mm stroke, and a yoke drive unit operating mode with a plain-bearing guide. It operates on compressed air within a pressure range of 0.15 MPa to 0.8 MPa at a maximum speed of 1.7 m/s, utilizing elastic cushioning rings at both ends and position sensing via proximity switch. The unit accommodates an ambient temperature range of -10 °C to 60 °C, a 10 mm distance of the centre of gravity of the payload to the yoke plate xs, and a max permissible torque load Mx of 0.057 Nm. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 4819892 is an industrial component featuring a size 16 designation with a nominal length of 15 mm and a product weight of 13 g. This part accommodates a 5 mm diameter for holder 1 and an 8 mm diameter for holder 2, supporting a transferable torque of 1.2 Nm alongside a maximum rotational speed of 10000 rpm and a mass moment of inertia of 0.355 kgmm2. Certified to VDMA24364-B2-L LABS conformity and RoHS material compliance, the unit operates in ambient and storage temperatures ranging from -25 °C to 60 °C with 0 to 95% relative air humidity in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo mounting plate MPL-04, part number 4903, is an industrial component featuring LABS (PWIS) conformity according to VDMA24364-B1/B2-L, as specified in the official Festo EN-US data sheet. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 4819883, features a size 16 design with a nominal length of 15 mm, a 6 mm diameter for holder 1, and an 8 mm diameter for holder 2. This RoHS-compliant unit weighs 12.8 g, has a mass moment of inertia of 0.355 kgmm², and delivers a transferable torque of 1.5 Nm at a maximum rotational speed of 10000 rpm in any mounting position. It conforms to VDMA24364-B2-L LABS standards and operates within an ambient and storage temperature range of -25 °C to 60 °C alongside 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 4500006 is a 20 mm wide, 5/2-way monostable industrial component featuring a piston gate valve structural design and soft sealing principle for direct manual actuation with adjustable exhaust air. This unit provides a normal nominal flow rate of 1200 l/min through 1/4 NPT pneumatic working ports, operating across pressures from -0.095 MPa to 1 MPa with a pneumatic spring reset and positive overlap. Certified for ATEX Zone 1, 2, 21, and 22 explosive environments, the component operates on compressed air conforming to ISO 8573-1:2010 [7:-:-] and allows oil lubrication. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 4902 is a straight-design industrial component featuring a brass housing, an M5 external thread pneumatic connection 1, and a pneumatic connection 2 for tubing with a 6 mm outside diameter. This component provides a 2.5 mm nominal width, a sealing ring type of seal on the screwed plug, and operates across a pressure range of -0.95 bar to 10 bar with compressed air as per ISO 8573-1:2010 [7:-:-]. Featuring a product weight of 2 g, a corrosion resistance class of CRC 1, and an ambient temperature range of -10 °C to 60 °C, it supports any mounting position and permits oil lubrication operation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 4149947 is a double-acting industrial guide component featuring a 6 mm piston diameter and a 20 mm stroke, operating within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar). This yoke drive unit incorporates a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, achieving a maximum speed of 1.3 m/s and an impact energy of 0.012 Nm in the end positions. It offers a low corrosion stress resistance class (CRC 1), VDMA24364-B1/B2-L LABS conformity, and ISO 14644-1 Class 6 cleanroom suitability while functioning with compressed air per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 4819278 industrial component features a size 87 frame with a 114 mm center-to-center distance, a 1:1 gear ratio, and an actuator interface code T46 with a motor input interface code 87A. This RoHS-compliant part supports an IP40 degree of protection, VDMA24364 Zone III LABS conformity, any mounting position, a 3000 rpm maximum rotational speed, a transferable torque of 3 Nm, a no-load driving torque of 0.22 Nm, and a mass moment of inertia of 41.2 kgmm² at an 877 g product weight. Operational parameters include a 0 °C to 50 °C ambient temperature range, -20 °C to 60 °C storage temperature, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo part number 4901 is a 5/2-way, dominant, bistable industrial component featuring a plate seat structural design and a nominal width of 2.5 mm. Operating within a pressure range of 1 bar to 8 bar, this unit delivers a normal nominal flow rate of 105 l/min utilizing compressed air as per ISO 8573-1:2010 [7:-:-]. It weighs 130 g, functions across an ambient temperature range of 0 °C to 60 °C, and supports mounting on a sub-base, mounting frame, or via through-hole connections. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 4500005 is a 20 mm wide, 5/2-way monostable industrial component featuring a piston gate valve structural design with a soft sealing principle and positive overlap lap. Operating with a G1/8 pneumatic working port, a nominal width of 5.2 mm, and a normal nominal flow rate of 750 l/min, it provides a direct control type with a reversible flow direction, adjustable exhaust air function, and pneumatic spring reset method. This manually actuated component functions across an operating pressure range of -0.095 MPa to 1 MPa (-0.95 bar to 10 bar) and a maximum switching frequency of 0.5 Hz, utilizing compressed air as per ISO 8573-1:2010 [7:-:-] with optional oil lubrication. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention and protection, it supports any mounting position and is restricted to manual operation. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 4149946 is an industrial guide drive unit featuring a 6 mm piston diameter, a 15 mm stroke, and a yoke drive operating mode with elastic cushioning rings or pads at both ends. Designed with a plain-bearing guide, it supports a maximum speed of 1.3 m/s, an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar), and functions in any mounting position with double-acting operation using compressed air as per ISO 8573-1:2010 [7:4:4]. This component achieves ISO 14644-1 class 6 cleanroom suitability and a 1 - low corrosion stress rating, accommodating an ambient temperature range of -10 °C to 60 °C with position sensing via proximity switch. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 4810862 is a mechanical 2-way ball valve featuring a soft sealing principle and an inside diameter of 200 mm with a nominal width DN of 200. This 2/2 component provides a reversible flow direction, a flow rate Kv of 7816 m³/h, a nominal pressure PN of 20, and a breakaway torque of 600 Nm at differential pressure. It supports in-line installation in any mounting position with an F14 flange hole pattern and ANSI B16.5 class 150 flange connections, accommodating media such as vapor, compressed air, inert gas, water, and neutral liquids within a temperature range of -20 °C to 200 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 4896017 is a manual industrial component featuring a high-alloy stainless steel hand lever constructed from material number 1,4301, with a width across flats of 14 mm and an overall length of 197.9 mm. Weighing 188 g, this RoHS-compliant part supports any mounting position and offers a CRC corrosion resistance class of 3 for high corrosion stress alongside VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →