Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8198552 is an electrically actuated industrial component featuring a 2x2/2 closed, monostable valve function and a piston gate valve structural design with a soft sealing principle. This piloted valve conforms to ISO 5599-1 with a size 1 sub-base pneumatic working port, an 8 mm nominal width, and a standardized nominal flow rate of 1700 l/min according to ISO 8778. It offers an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar), an IP65 and NEMA 4 degree of protection, a mechanical spring reset method, and a detenting manual override. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8203312 is a straight industrial component featuring a 3 mm nominal width and a push-pull structural design with a 14.8 mm tubing insertion depth for 4 mm outside diameter pneumatic tubing on both connections. This part operates with compressed air, inert gases, carbon dioxide, air, oxygen, and nitrogen, supporting a temperature-dependent operating pressure from -0.09 MPa to 1.6 MPa and a medium temperature range of 0 °C to 120 °C. Supplied in a pack size of 10 with a product weight of 4.76 g each, it achieves a CRC 2 corrosion resistance class and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8192300 is an electromechanical linear axis with a ball screw structural design, featuring a 400 mm working stroke, size 120 format, and 25 mm screw diameter with a 10 mm/U spindle pitch. Driven by either a stepper or servo motor, this unit achieves a maximum speed of 0.5 m/s, a maximum acceleration of 15 m/s², a maximum rotational speed of 3200 rpm, a repetition accuracy of ±0.01 mm, and a ball screw reversing backlash of ±0.02 mm. Built with a recirculating ball bearing guide and an incremental linear potentiometer measuring principle for inductive sensor position sensing, the axis operates at a 100% duty cycle in any mounting position while conforming to VDMA24364-C1-L LABS standards and reduced Cu/Zn/Ni values for Li-ion battery production. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8211029 is a round 1.5-fold protective bellows industrial component featuring a 100 mm suction cup diameter, a 26 mm height compensation, and a nominal width of 8 mm with an internal thread G3/8 vacuum connection. Operating within a pressure range of -95 kPa to 0 kPa at an ambient temperature of -20 °C to 80 °C, this 104 g black component delivers a holding force of 379 N and a lateral force of 346 N at a nominal operating pressure of -60 kPa. It exhibits a VDMA24364-A1/A2-L LABS conformity and a moderate corrosion stress rating of CRC 2 for atmospheric air operating media based on ISO 8573-1:2010 [7:-:-]. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8198551 is a monostable electrical industrial component featuring a 2x3/2 open/closed piston gate valve design with a 42 mm width and an ISO 8778 standardized nominal flow rate of 1400 l/min. Operating between -0.9 bar and 10 bar, this piloted valve incorporates a soft sealing principle, mechanical spring reset, adjustable exhaust air via individual sub-base, and an IP65 and NEMA 4 degree of protection conforming to ISO 5599-1. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8211028 is a round protective bellows 1.5-fold industrial component featuring an 80 mm suction cup diameter, 22 mm suction cup height compensation, and a nominal width of 8 mm with an internal thread G3/8 vacuum connection positioned up. Operating within a pressure range of -95 kPa to 0 kPa and a nominal operating pressure of -60 kPa, this black 69 g unit delivers a holding force of 246 N and a lateral force of 225 N at nominal operating pressure. It accommodates a minimum workpiece radius of 75 mm, a suction cup volume of 64 cm³, an ambient temperature range of -20 °C to 80 °C, and operates using atmospheric air based on ISO 8573-1:2010 [7:-:-] with moderate corrosion stress CRC 2 and VDMA24364-A1/A2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8203311 is an L-shaped industrial component featuring a 10 mm nominal width, a 22 mm tubing insertion depth, and an O-ring seal on the screwed plug with integrated mounting holes. Designed with a push-pull structural principle and a maximum tightening torque of 10 Nm, this unit operates across an ambient temperature range of 0 °C to 60 °C and a medium temperature range of 0 °C to 120 °C. It supports a temperature-dependent operating pressure of -0.09 MPa to 1.2 MPa and handles compressed air, inert gases, carbon dioxide, air, oxygen, and nitrogen with a moderate corrosion resistance class of CRC 2. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8192299 is an electromechanical linear axis featuring a size 120 structural design with a ball screw, 300 mm working stroke, and 0 mm stroke reserve. This component utilizes a recirculating ball bearing guide, a 25 mm screw diameter, and a 10 mm/U spindle pitch, delivering a maximum speed of 0.5 m/s, a maximum rotational speed of 3200 rpm, and a maximum acceleration of 15 m/s² with a 100% duty cycle. It operates with a ball screw reversing backlash of ±0.02 mm, repetition accuracy of ±0.01 mm, incremental linear potentiometer measuring principle, and position sensing for inductive sensors while supporting stepper or servo motors in any mounting position. Compliant with VDMA24364-C1-L LABS conformity, the unit is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Engineered by Festo, part number 8198550 is an electrical piston gate valve featuring a 2x3/2 open monostable valve function, mechanical spring reset, and a standardized nominal flow rate of 1400 l/min according to ISO 8778. This component offers an ISO 5599-1 size 1 sub-base pneumatic working port, an operating pressure range of -0.09 MPa to 1 MPa, and IP65 and NEMA 4 protection ratings. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 50 mm round protective bellows 1.5-fold industrial component features a 7 mm nominal width, 11.5 mm suction cup height compensation, and 15 cm³ suction cup volume with an internal thread G3/8 vacuum connection. Operating at a nominal pressure of -60 kPa within a -95 kPa to 0 kPa range, this black 36 g unit delivers a 90 N holding force and 72 N lateral force at nominal operating pressure. Rated at CRC 2 for moderate corrosion stress and VDMA24364-A1/A2-L LABS conformity, it functions across an ambient temperature range of -20 °C to 80 °C using atmospheric air based on ISO 8573-1:2010 [7:-:-] in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8203310, is an L-shaped push-pull fitting featuring an 8 mm nominal width, a 20.1 mm tubing insertion depth, an O-ring seal on the screwed plug, and integrated mounting holes. It operates within a temperature-dependent pressure range of -0.9 bar to 12 bar and a temperature range of 0 °C to 120 °C for compatible media including compressed air, inert gases, carbon dioxide, oxygen, and nitrogen. The unit offers moderate corrosion resistance with a CRC rating of 2, VDMA24364 Zone III LABS conformity, and a maximum tightening torque of 10 Nm in any mounting position. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo 40 mm round protective bellows 1.5-fold industrial component features a 10 mm suction cup height compensation, a 7.8 cm³ suction cup volume, and a nominal width of 4 mm with an internal thread G3/8 vacuum connection positioned at the top. Operating effectively within a pressure range of -95 kPa to 0 kPa and an ambient temperature range of -20 °C to 80 °C, this 28 g black part delivers a holding force of 60 N and a lateral force of 62 N at its nominal operating pressure of -60 kPa. It exhibits a moderate corrosion resistance class of 2 and VDMA24364-A1/A2-L LABS conformity while accommodating a minimum workpiece radius of 30 mm in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8198549 is a 2x3/2 closed, monostable industrial component featuring a piloted, piston gate valve design with a soft sealing principle and positive overlap. This electrical unit provides a standardized nominal flow rate of 1400 l/min across an operating pressure range of -0.09 MPa to 1 MPa, incorporating a mechanical spring reset, detenting manual override, and external pilot air supply. Built to ISO 5599-1 standards with an IP65 and NEMA 4 degree of protection, the 42 mm wide assembly includes an ISO size 1 pneumatic working sub-base and adjustable exhaust air function via individual sub-bases for flexible mounting in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8192298 is an electromechanical linear axis featuring a ball screw structural design with a size 120 format, a 200 mm working stroke, and a 25 mm screw diameter with a 10 mm/U spindle pitch. Engineered for any mounting position, this component utilizes a recirculating ball bearing guide, supports stepper and servo motors, and achieves a maximum speed of 0.5 m/s, a maximum rotational speed of 3200 rpm, and a maximum acceleration of 15 m/s². It features a ball screw reversing backlash of ±0.02 mm, a repetition accuracy of ±0.01 mm, a 100% duty cycle, an incremental linear potentiometer measuring principle, and position sensing for inductive sensors, while complying with VDMA24364-C1-L LABS conformity and F1a suitability for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
This Festo industrial component, part number 8203309, is an L-shaped push-pull fitting featuring a nominal width of 8 mm, an O-ring screwed plug seal, and integrated mounting holes. It operates within a temperature range of 0 °C to 120 °C, handling compressed air, inert gases, carbon dioxide, air, oxygen, and nitrogen with a maximum tightening torque of 9 Nm. Packaged in a quantity of five, the unit achieves a moderate corrosion resistance class of 2 and supports VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 30 mm round protective bellows 1.5-fold industrial component features a 9 mm height compensation and a 4 mm nominal width with an internal thread G3/8 vacuum connection positioned upward. Operating within a pressure range of -95 kPa to 0 kPa and a nominal operating pressure of -60 kPa, this 27 g black unit delivers a holding force of 37 N and a lateral force of 31 N at nominal pressure. It is rated for ambient temperatures from -20 °C to 80 °C, features a corrosion resistance class of 2, and accommodates a minimum workpiece radius of 25 mm with a suction cup volume of 5.5 cm³. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8203308 is an L-shaped industrial component featuring a 6 mm nominal width, 17.6 mm tubing insertion depth, and an O-ring seal on the screwed plug with integrated mounting holes. This pack of 10 utilizes a push-pull structural design, operates with compressed air, inert gases, carbon dioxide, air, oxygen, or nitrogen, and offers a maximum tightening torque of 9 Nm across an ambient temperature range of 0 °C to 60 °C. It provides a corrosion resistance class of 2 for moderate stress, VDMA24364 Zone III LABS conformity, and operates under a temperature-dependent pressure of -0.09 MPa to 1.6 MPa alongside a constant temperature range pressure of -0.09 MPa to 0.3 MPa. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8198548 is an electrical, piloted industrial component featuring a 2x3/2 open monostable valve function with a piston gate valve structural design and soft sealing principle. Conforming to ISO 5599-1 with size 1 pneumatic working ports and an external pilot air supply, this unit delivers a standardized nominal flow rate of 1300 l/min across an operating pressure range of 3 bar to 10 bar. It includes an 8 mm nominal width, a 42 mm width dimension, adjustable exhaust air via individual sub-base, pneumatic spring reset, positive overlap lap, reversible flow direction, detenting manual override, and IP65 and NEMA 4 degree of protection for installation in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8192297 is an electromechanical linear axis featuring a size 120 structural design with a ball screw, a 1000 mm working stroke, and a 0 mm stroke reserve. Driven by a stepper or servo motor with a maximum rotational speed of 2342 rpm, this unit achieves a maximum speed of 0.2 m/s, a max acceleration of 15 m/s², and a 100% duty cycle utilizing a recirculating ball bearing guide. It includes a 25 mm screw diameter, a 5 mm/U spindle pitch, an incremental linear potentiometer measuring principle, and position sensing for inductive sensors, delivering a ball screw reversing backlash of ±0.02 mm and repetition accuracy of ±0.01 mm in any mounting position. The component conforms to VDMA24364-C1-L LABS (PWIS) and is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component features a round protective bellows 1.5-fold suction cup with a 20 mm diameter, a 2 cm³ volume, and a 5.8 mm height compensation, designed for a minimum workpiece radius of 12.5 mm. Operating within a pressure range of -95 kPa to 0 kPa and an ambient temperature span of -20 °C to 80 °C, the 24 g unit delivers a holding force of 15 N and a lateral force of 15 N at a nominal operating pressure of -60 kPa. It incorporates a G3/8 internal vacuum connection facing upward, allowing mounting in any position with a moderate corrosion stress class of CRC 2. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →