Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo size 16 industrial component is a double-acting pneumatic parallel gripper featuring two jaws driven by a ball guide with a positively driven motion sequence and a stroke of 3 mm per jaw. Operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi), this unit achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and a minimum opening time of 29 ms at 6 bar with position sensing via proximity switch. It accommodates any mounting position, excludes specific metals containing copper, zinc, or nickel by mass, and requires no gripping force backup while maintaining 0 mm jaw backlash Sz and 0 deg angular play. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
This Festo industrial component, part number 8112993, features a straight design with a nominal width of 8 mm and an internal thread G1/4 pneumatic connection 1 paired with a pneumatic connection 2 for 10 mm outside diameter tubing. Built with a nickel-plated brass housing, external hexagon SW17 mounting, and a blue releasing ring, it operates within a pressure range of -0.95 bar to 8 bar for compressed air compliant with ISO 8573-1:2010 [7:4:4]. The part supports any mounting position, allows lubricated operation, meets VDMA24364 Zone III LABS conformity, and achieves ISO 14644-1 Class 4 cleanroom suitability at a weight of 26.76 g in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118626 is a double-acting industrial guide drive unit featuring a 12 mm piston diameter, a 30 mm stroke, and a yoke drive mode with a payload center of gravity distance of 25 mm to the yoke plate. This component utilizes elastic cushioning rings or pads at both ends, a plain-bearing guide, and position sensing via proximity switch, operating at pressures between 0.2 MPa and 1 MPa (2 bar to 10 bar) with a maximum speed of 0.8 m/s. It accommodates compressed air per ISO 8573-1:2010 [7:4:4] with optional oil lubrication, achieves ISO 14644-1 cleanroom class 6, complies with VDMA24364-B1/B2-L LABS conformity, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values while excluding specific metals by mass across an ambient temperature range of -20 °C to 80 °C in any mounting position. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo size 16 pneumatic parallel gripper features two gripper jaws operating on a double-acting system with a lever structural design, ball guide, and laterally connected positively driven motion sequence. This component provides a 3 mm stroke per gripper jaw, a repetition accuracy of 0.02 mm, zero gripper jaw angular play and backlash, and an operating pressure range of 1 bar to 8 bar. Position sensing is achieved via proximity switch, supporting a maximum operating frequency of 3 Hz and a minimum opening time of 29 ms at 6 bar with any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8112992 is a standard straight industrial component featuring a push-pull structural design with a 6 mm nominal width and an external hexagon SW17 mounting type. Constructed with a nickel-plated brass housing and a blue releasing ring, this unit includes an internal thread G1/4 pneumatic connection 1 and accommodates a pneumatic tubing outside diameter of 8 mm for connection 2. It operates within a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8118625 is a double-acting industrial drive unit featuring a yoke structural design, a 12 mm piston diameter, and a 25 mm stroke with elastic cushioning rings or pads at both ends. Operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and utilizing a plain-bearing guide, this component achieves a maximum speed of 0.8 m/s while supporting compressed air media per ISO 8573-1:2010 [7:4:4] with optional oil lubrication. It is classified under CRC 0 corrosion resistance, complies with VDMA24364-B1/B2-L LABS conformity, meets ISO 14644-1 cleanroom Class 6 suitability, and restricts copper, zinc, and nickel constituents to maintain compatibility with Li-ion battery production under reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive an RFQ.
View product details →
Festo
The Festo 8114566 is a 7.5 mm wide size 7 direct-controlled electrical rocker valve featuring a diaphragm seal and soft sealing principle with FFPM and PEEK media-contacting materials. This monostable 2/2 closed valve has a 1.2 mm nominal width, a flanged fluid connector, and supports reversible flow with restrictions for both liquid and gaseous media. Designed with a mechanical spring reset, socket electrical connection utilizing connection diagram Q7 with 2 pins, and through-hole mounting for an M2 screw, it can be installed in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8112991 is a standard straight industrial component featuring a nominal width of 4.5 mm, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing utilizing a push-pull structural design with a blue releasing ring. Constructed with a nickel-plated brass housing, this part weighs 22.67 g, mounts via an external hexagon SW17 in any position, and operates within a pressure range of -0.095 MPa to 0.8 MPa for compressed air as per ISO 8573-1:2010 [7:4:4] under ambient temperatures from -5 °C to 60 °C. Packaged in a quantity of 10, the RoHS-compliant assembly offers VDMA24364 Zone III LABS conformity, CRC 1 low corrosion stress resistance, ISO 14644-1 Class 4 cleanroom suitability, and permits lubricated operation. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered with a size 16 pneumatic actuator system and a double-acting parallel gripper function, this Festo industrial component part number 8116786 features two gripper jaws with a stroke of 3 mm each. The unit utilizes a ball guide supporting a max. operating frequency of 3 Hz, a repetition accuracy of 0.02 mm, and an operating pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi). Position sensing is accomplished via proximity switch, while the structural design incorporates a lateral connection direction, lever, side mounting type for gripper fingers, and positively driven motion sequence. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8118624 is a double-acting industrial component featuring a 12 mm piston diameter, a 20 mm stroke, and a yoke drive unit operating mode with a 25 mm centre of gravity distance from the payload to the yoke plate. This unit operates on compressed air per ISO 8573-1:2010 [7:4:4] within a 0.2 MPa to 1 MPa pressure range, utilizing a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch. Constructed with a corrosion resistance class of CRC 0 and restricted copper, zinc, and nickel content for Li-ion battery production suitability, it functions across ambient temperatures from -20 °C to 80 °C and achieves cleanroom compatibility of ISO Class 6. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8112990 is a standard industrial component featuring a straight design with a nominal width of 2.5 mm, an internal thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for a 4 mm outside diameter tubing utilizing a push-pull principle. Constructed with a nickel-plated brass housing, external hexagon SW17 mounting type, and a blue releasing ring, this part operates within a pressure range of -0.95 bar to 8 bar and ambient temperatures from -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Each pack size contains 10 units, weighing 22.8 g each, with VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8116785 is a double-acting parallel pneumatic gripper featuring two jaws with a size 16 rating and a 3 mm stroke per jaw. This component utilizes a ball guide with a positively driven motion sequence, a lateral connection direction, and supports any mounting position with position sensing via proximity switch. It operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, or 14.5 psi to 116 psi) with a max operating frequency of 3 Hz and a minimum opening time of 29 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8118623 is a double-acting industrial component featuring a 12 mm piston diameter, a 10 mm stroke, and a yoke drive unit operating mode with a plain-bearing guide. It operates on compressed air according to ISO 8573-1:2010 [7:4:4] within a 2 bar to 10 bar operating pressure range, utilizing elastic cushioning rings or pads at both ends and accommodating position sensing via proximity switch. This guide unit achieves Class 6 cleanroom suitability per ISO 14644-1 and meets VDMA24364-B1/B2-L LABS conformity with specific copper, zinc, and nickel restrictions for battery production compatibility. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8112989 is a straight-design industrial component featuring a nominal width of 8 mm, an internal thread G1/8 pneumatic connection 1, and a connection for 10 mm outside diameter pneumatic tubing 2. Constructed with a nickel-plated brass housing and an external hexagon SW17 mounting type, this component operates within a pressure range of -0.095 MPa to 0.8 MPa and a temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers any mounting position, a push-pull structural design, a blue releasing ring, and a pack size of 10 with a unit product weight of 27.66 g. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8114564 is a direct-controlled 3/2 monostable industrial component featuring a soft-sealing rocker valve with a diaphragm seal, a 1.2 mm nominal width, and a 7.5 mm width dimension in a size 7 frame. Engineered with FFPM and PEEK media-contact materials, this electrical actuation valve utilizes a mechanical spring reset, accommodates reversible flow with restrictions, and connects via a 2-pin socket with connection diagram Q7. It includes a flange fluid connector, lacks manual override, operates with liquid and gaseous media, and mounts in any position utilizing through-holes for M2 screws. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8116784 is an industrial component designed for a gripper, featuring a size of 10 and an 8 mm stroke. Weighing 3.7 g with an NBR protective cap, this RoHS-compliant part operates within an ambient temperature range of -10 °C to 60 °C and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) alongside VDMA24364-B2-L LABS conformity. It mounts via insertion in a slot from above. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8112988 is a standard straight industrial component featuring a 6 mm nominal width, an internal thread G1/8 pneumatic connection 1, and a pneumatic connection 2 for an 8 mm outside diameter tubing utilizing a push-pull structural design with a blue releasing ring. Constructed with a nickel-plated brass housing and an external hexagon SW14 mounting type, this part operates at pressures from -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -5 °C to 60 °C. It offers any mounting position, a corrosion resistance class of 1, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and permits lubricated operation while weighing 16.98 g in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8118600 is an industrial component of size 4 belonging to the MS series. This product features a mounting bracket made of steel and has a product weight of 30 g with RoHS compliant materials. It is rated for a corrosion resistance class (CRC) of 2 for moderate corrosion stress and conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8116783 is an industrial component designed for use with a gripper, featuring a size of 10 and a 4 mm stroke. Constructed with an NBR protective cap and RoHS-compliant materials, this 2.7 g unit operates within an ambient temperature range of -10 °C to 60 °C. It is capable of being inserted in a slot from above and meets VDMA24364-B2-L LABS conformity while being suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8114536 is a size 10 industrial component featuring a contracting diaphragm structural design with a nominal length of 80 mm and a stroke ranging from 0 mm to 20 mm. Operating single-acting in a pulling mode with compressed air up to 0.8 MPa, this TÜV-certified part delivers a maximum contraction of 25 percent of its nominal length alongside a maximum additional freely suspended load of 30 kg. It maintains a cyclic muscle repetition accuracy of 1 percent or less of the nominal length within an ambient temperature range of -5 °C to 60 °C and exhibits a moderate corrosion resistance class of 2. Submit the exact part number, quantity, and application requirements for a quote.
View product details →