Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8092096 is a double-acting industrial component featuring a 25 mm piston diameter and a 15 mm stroke with a piston rod at one end. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a 0.6 bar to 10 bar pressure range, this unit delivers a theoretical advancing force of 295 N and a retracting force of 247 N at 6 bar. It incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and maintains ISO 14644-1 Class 5 cleanroom suitability for ambient temperatures from 0 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8097207, features a 20-meter cable with an energy chain-compatible characteristic and operates within a DC and AC voltage range of 0 V to 30 V at a 5 A current rating at 40° C. The field device side utilizes a straight square socket connection with 2 occupied pins using connection diagram H7 coded for motor brake, while the control side terminates with 2 open-ended wires and no label holder. Designed with a 2 kV surge resistance, connector cable test conditions are available upon request. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8102818 is a single-acting gear rack and pinion industrial valve actuator featuring a size 120 body, an F07 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal angle. Built with a shaft connection depth of 19 mm, an ISO 5211 standard valve connection, and VDI/VDE 3845 NAMUR and AA 1 compliance for positioners and sensors, it operates at a nominal pressure of 3.5 bar (50.75 psi) within an operating pressure range of 2 bar to 8 bar and a burst pressure of 24 bar. Certified as a safety device to ISO 13849 and IEC 61508 for SIL 2 low demand, SIL 1 high demand, and SIL 3 in redundant architectures, the unit performs its safety function by switching to the defined safety position via spring force when compressed air is switched off and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8105929 is an industrial component featuring an actuator interface code of D40 and a motor input interface code of 60AA with a transferable torque of 12.5 Nm and a product weight of 363 g. Built with RoHS compliant materials, this unit supports any mounting position, VDMA24364-B2-L LABS conformity, and an IP40 degree of protection. Operating parameters include an ambient temperature range of -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo EPCO-40-50-5P-ST-E (1472501) is an electric cylinder identified by GTIN 4052568233327. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo industrial component.
View product details →
Festo
The Festo 8092095 is a double-acting industrial component featuring a 25 mm piston diameter and a 40 mm stroke, utilizing elastic cushioning rings at both ends to absorb 0.3 J of impact energy in the end positions. Operating within a pressure range of 0.06 MPa to 1 MPa, this piston-and-rod assembly delivers a theoretical advancing force of 295 N and a retracting force of 247 N at 6 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4]. It accommodates any mounting position, provides position sensing via proximity switch, and maintains ISO 14644-1 Class 5 cleanroom suitability alongside a CRC 1 low corrosion resistance rating. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8097206 is an industrial component featuring a straight square socket connection with a 2-pin H7 connection technology coded for a motor brake on the field device side, and an open end with 2 wires on the control side without a label holder. This assembly supports a DC and AC operating voltage range of 0 V to 30 V, a current rating of 5 A at 40° C, and a surge resistance of 2 kV across a 15 m cable characteristic suitable for energy chains. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8105928 industrial component is designed with an actuator interface code of D40 and a motor input interface code of 58AA, providing a transferable torque of 12.5 Nm at a product weight of 354 g. This unit features any mounting position, VDMA24364-B2-L LABS conformity, RoHS compliant materials, and an IP40 degree of protection. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8102817 is a single-acting gear rack/pinion industrial valve actuator featuring a size 80 actuator, an F07 flange hole pattern, and a 90-degree swivel angle with an end-position adjusting range of -5 to 5 degrees at both 0 degrees and the nominal swivel angle. Operating at a nominal pressure of 6 bar (87 psi) within an operating pressure range of 2 to 8 bar (29 to 116 psi) and a burst pressure of 24 bar, this safety device includes a safety function that switches the actuator to the defined safety position via spring force when compressed air is switched off and the spring chamber is exhausted. Certified to ISO 13849 and IEC 61508 for functional safety up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture, it incorporates a 19 mm shaft connection depth, universal mounting position, ISO 5211 standard valve connection, VDI/VDE 3845 (NAMUR) valve connection compliance, and a VDI/VDE 3845 Size AA 1 connection point for positioners and position sensors. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8092094 is a double-acting industrial component featuring a 25 mm piston diameter, a 40 mm stroke, and elastic cushioning rings or pads at both ends. Operating on compressed air within a 0.6 bar to 10 bar pressure range, this unit delivers a theoretical retracting force of 247 N and advancing force of 295 N at 6 bar. It incorporates a piston rod at one end with an external thread, achieves ISO 14644-1 Class 5 cleanroom suitability, and functions within ambient temperatures from 0 °C to 80 °C in any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo industrial component, part number 8105927, features an actuator interface code of S38 and a motor input interface code of 58AA with a transferable torque rating of 6.5 Nm. Weighing 339 g, this RoHS-compliant unit supports any mounting position, VDMA24364-B2-L LABS conformity, and an IP40 degree of protection. Operating parameters include an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and relative air humidity from 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8097205 is an industrial component featuring a 25-meter cable with an energy-chain-suitable characteristic and an absence of a label holder. Electrical connection 1 on the field device side utilizes a straight, 4-pin, 4-wire square socket featuring connection technology H6 coded for motors, while electrical connection 2 on the control side consists of an open end with 4 pins and 4 occupied wires. This assembly supports a DC and AC operating voltage range of 0 V to 300 V, a current rating of 9.5 A at 40° C, and a surge resistance of 2 kV, with connector cable test conditions available upon request. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo EAMM-A-D32-67A-S1 (2256397) is an axial kit manufactured by Festo, identified by GTIN 4052568264574. This industrial component integrates mechanical drive components according to the official product specification. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8102816 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 80 and a 90-degree swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, this safety device achieves its safety switching position through spring force when compressed air is switched off and the spring chamber is exhausted, supporting up to SIL 2 in low demand mode and SIL 3 in a redundant architecture. It operates at a nominal pressure of 4.5 bar within an operating pressure range of 2 bar to 8 bar, and incorporates an ISO 5211 standard valve connection with a F07 flange hole pattern. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
Engineered by Festo, part number 8105926 is an industrial component featuring an actuator interface code of S38 and a motor-in interface code of 60AA with a transferable torque rating of 6.5 Nm and a product weight of 365 g. The unit functions with any mounting position, provides an IP40 degree of protection, and conforms to VDMA24364-B2-L LABS (PWIS) requirements, utilizing RoHS-compliant materials. Operating parameters include an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8092093 is a double-acting industrial component featuring a 25 mm piston diameter and a 10 mm stroke with a piston rod at one end. Designed with a piston and piston rod structural design, it operates within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar) using compressed air as per ISO 8573-1:2010 [7:4:4] and includes elastic cushioning rings at both ends. Position sensing is achieved via proximity switch, delivering a theoretical force of 295 N advancing and 247 N retracting at 6 bar while accommodating an ambient temperature range of 0 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo 8097204 industrial component is a 20-meter connector cable featuring a straight, square 4-pin socket on the field device side with connection diagram H6 coded for motors, and an open-end 4-pin connection on the control side. This cable operates within a 0 V to 300 V range for both AC and DC, supports a current rating of 9.5 A at 40° C, and provides a surge resistance of 2 kV without a label holder. Built with characteristics suitable for energy chains, the wiring includes all 4 occupied pins on both ends while connector cable test conditions remain available on request. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8105924 is an industrial component featuring a transferable torque of 6.5 Nm, a product weight of 362 g, and an actuator interface code of S38 alongside a motor-in interface code of 60RA. This RoHS-compliant unit offers VDMA24364-B2-L LABS conformity, an IP40 degree of protection, and supports mounting in any position. Operating ambient temperatures range from -10 °C to 60 °C within 0 to 95 percent relative air humidity, with storage temperatures permissible between -25 °C and 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8092092 is a double-acting industrial component featuring a 25 mm piston diameter and a 25 mm stroke with a piston rod at one end. This piston and piston rod assembly operates within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4] and includes elastic cushioning rings at both ends. It delivers a theoretical force of 295 N advancing and 247 N retracting at 6 bar, while maintaining ISO 14644-1 Class 5 cleanroom suitability and a Class 1 corrosion resistance rating. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8102815 is a single-acting gear rack and pinion industrial component featuring a valve actuator size of 80, an F07 flange hole pattern, and a nominal swivel angle of 90 degrees with an adjustable end-position range of -5 to 5 degrees at both 0 degrees and the nominal angle. Certified for safety functions to ISO 13849 and IEC 61508, this safety device achieves SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture by switching to a defined safety position via spring force when compressed air is removed and the spring chamber is exhausted. It operates within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) with a nominal operating pressure of 3.5 bar and a burst pressure of 24 bar, utilizing an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR and AA 1 interfaces for positioners and sensors in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →