Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
Engineered by Festo, part number 8085342 is an IP54-rated miter gear unit featuring a 3:1 gear ratio, a 40 mm gearbox flange size, and a 40 mm motor flange size. This component delivers a continuous output torque of 4.5 Nm, a maximum output torque of 7 Nm, a maximum actuator speed of 18000 rpm, and operates within a temperature range of -25 °C to 90 °C. The unit weighs 500 g, supports a mass moment of inertia of 0.049 kgcm², incorporates a torsional backlash of 0.35 deg, and complies with VDMA24364-B2-L LABS conformity and RoHS material standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8083720 is an electrical mini-slide featuring a ball screw with a 12 mm screw diameter, a 12 mm/U spindle pitch, and a 150 mm working stroke with 0 mm stroke reserve. This component utilizes a recirculating ball bearing guide, an integrated actuator, an absolute single-turn magnetic rotor position sensor, and a user interface with an LED display and integrated end-position sensing. It operates at a 100% duty cycle with insulation protection class B, delivering a maximum speed of 0.24 m/s, a maximum acceleration of 5 m/s², and a repetition accuracy of ±0.015 mm in any mounting position via motor encoder or proximity switch position sensing. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Engineered with a 10 mm stroke and a 6 mm piston diameter, this double-acting Festo industrial component utilizes a yoke drive unit and a recirculating ball bearing guide. The structural design integrates a double piston, piston rod, and slide with elastomer cushioning at both non-adjustable ends, operating within a pressure range of 0.15 MPa to 0.8 MPa and supporting a maximum speed of 0.5 m/s. Position sensing is achieved via proximity switch, while operating conditions accommodate compressed air as per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8082143 is a reducing sleeve featuring an internal square and external octagon structural design with a length of 17 mm and a product weight of 190 g. Constructed from sintered stainless steel with RoHS compliance, this component offers a corrosion resistance class of 2 for moderate corrosion stress and LABS conformity per VDMA24364 Zone III. Connection 1 functions as the actuator outlet with an SW17 design, while connection 2 serves as the reducing outlet with an SW14 design. This item is supplied in a pack size of 10 units. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8085198 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 200 mm stroke, and a yoke structural design incorporating a piston rod, slide, and ball bearing cage guide. Operating via compressed air within a pressure range of 14.5 psi to 116 psi and an operating speed up to 0.8 m/s, this component utilizes external hydraulic cushioning and provides position sensing via proximity switches with a repetition accuracy of 0.02 mm or less. The unit functions in any mounting position across an ambient temperature range of -10 °C to 60 °C, exhibits a low corrosion stress resistance class of 1, and meets ISO 14644-1 Class 6 cleanroom standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8082142 is a 16 mm industrial reducing sleeve featuring a structural design with an internal square and external octagon, supplied in a pack size of 10 with a total product weight of 130 g. Manufactured with a sintered steel and stainless sleeve material that includes RoHS compliant materials, this component achieves a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364 Zone III LABS conformity. Connection 1 functions as the actuator outlet with an SW14 design, while Connection 2 functions as the reducing outlet with an SW11 design. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8083719 is an electrical mini-slide featuring an integrated actuator, ball screw structural design, size 60 dimensions, and a 12 mm screw diameter with a 12 mm/U spindle pitch. This component includes a recirculating ball bearing guide, a 125 mm working stroke with 0 mm stroke reserve, and supports any mounting position with a 100% duty cycle, Class B insulation protection, maximum speed of 0.24 m/s, maximum acceleration of 5 m/s², and repetition accuracy of ±0.015 mm. Functional equipment encompasses an absolute single-turn magnetic rotor position sensor, motor encoder or proximity switch position sensing, a user interface with an LED display, and configurable, non-galvanically isolated digital logic outputs. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8085197 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 150 mm stroke, and a yoke structural design incorporating a piston rod, slide, and ball bearing cage guide. Operating with compressed air conforming to ISO 8573-1:2010 [7:4:4] across a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar; 14.5 psi to 116 psi), this component achieves a maximum speed of 0.8 m/s with a repetition accuracy of <= 0.02 mm. It is equipped with external hydraulic cushioning, position sensing via proximity switch, and adjustable end-position ranges of 32 mm at the front and 30.4 mm at the rear, functioning in any mounting position within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8078739 industrial component features an anodized wrought aluminum alloy adapter plate with steel screws and steel centering elements, weighing 232 g. This RoHS compliant part offers a moderate corrosion resistance class (CRC 2) and VDMA24364-B2-L LABS conformity while supporting any mounting position via through-hole, screw, or centering sleeve installation methods. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8078399 is an electrical piston gate valve featuring a switchable 5/2- or 3/2-way valve function with a 32 mm width and a normal nominal flow rate of 1250 l/min normalized to DIN 1343. Operating at 230V AC within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar), this piloted component utilizes a NAMUR connection pattern conforming to VDI/VDE 3845 standards, internal pilot air supply, and a mechanical spring reset method. It includes an adjustable exhaust air function, soft sealing principle, positive overlap, and detenting or non-detenting manual override, achieving IP65 and IP67 protection ratings with a plug socket as per IEC 60529 and DNVGL-TAA000011J certification. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8082141 is an industrial reducing sleeve featuring an internal square and external octagon structural design with a length of 16 mm and a product weight of 180 g. Built with a sintered steel and stainless sleeve material and RoHS compliant construction, this component includes Connection 1 as an actuator outlet in a SW14 design and Connection 2 as a reducing outlet in a SW9 design. It delivers a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364 Zone III LABS conformity, supplied in a pack size of 10. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8085196 is a double-acting industrial drive unit featuring a 25 mm piston diameter, a 125 mm stroke, and a yoke structural design with a piston rod and slide. This component utilizes external hydraulic cushioning, a ball bearing cage guide, and position sensing via proximity switch, operating within a pressure range of 1 bar to 8 bar (14.5 psi to 116 psi) and supporting speeds up to 0.8 m/s with a repetition accuracy of 0.02 mm or less. Built with an adjustable end-position range of 32 mm at the front and 30.4 mm at the rear, it operates on compressed air conforming to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 8083718 is an electrical mini-slide featuring a ball screw with a 12 mm screw diameter, a 12 mm/U spindle pitch, and a 100 mm working stroke with zero stroke reserve. This component utilizes a recirculating ball bearing guide, an integrated actuator, an absolute single-turn magnetic rotor position sensor, and a motor encoder, achieving a repetition accuracy of ±0.015 mm, a maximum speed of 0.24 m/s, and a maximum acceleration of 5 m/s². Equipped with an LED display, a user interface, and integrated end-position sensing, the unit operates at a 100% duty cycle within insulation protection class B, supports any mounting position, and features configurable, non-galvanically isolated digital logic outputs. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8082140 is a reducing sleeve with a structural design featuring an internal square and external octagon, supplied in a pack size of 10 units with each component weighing 50 g. Connection 1 functions as the actuator outlet with an SW11 design, while connection 2 serves as the reducing outlet with an SW9 design and an overall length of 11 mm. Built with a sintered steel and stainless sleeve material, this RoHS compliant component features a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8078398 is an electrical piston gate valve featuring a switchable 5/2- or 3/2-way valve function with a width of 32 mm and a normal nominal flow rate of 1250 l/min. This piloted component operates at 24V DC with an operating pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar), utilizing internal pilot air supply, a soft sealing principle, and a NAMUR connection pattern conforming to VDI/VDE 3845 standards. Certified by DNVGL-TAA000011J and rated IP65/IP67 with a plug socket, the unit includes an adjustable exhaust air function, mechanical spring reset, positive overlap lap, non-reversible flow direction, and detenting or non-detenting manual override for any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8085195 is a double-acting industrial component featuring a 25 mm piston diameter, a 100 mm stroke, and a yoke drive unit with a piston rod and slide. It operates on compressed air within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, or 14.5 psi to 116 psi) and utilizes a ball bearing cage guide, external hydraulic cushioning, and proximity switch position sensing. Designed with an adjustable end-position range of 32 mm at the front length and 30.4 mm at the rear length, it achieves a maximum speed of 0.8 m/s and a repetition accuracy of 0.02 mm or less. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8083717 is an electrical mini-slide featuring an integrated actuator and a ball screw with a 12 mm screw diameter and 12 mm/U spindle pitch, configured with a recirculating ball bearing guide and a 75 mm working stroke with 0 mm stroke reserve. This component achieves a maximum speed of 0.24 m/s, a maximum acceleration of 5 m/s², and a repetition accuracy of ±0.015 mm across a 100% duty cycle with class B insulation protection. It includes position sensing via a motor encoder and proximity switch, an absolute single-turn magnetic rotor position sensor, a user interface with an LED display, and configurable, non-galvanically isolated digital logic outputs supporting any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8082139 is an industrial component featuring a structural design with an internal square, an external octagon, and a reducing sleeve made of sintered steel and stainless materials. This reducing sleeve weighs 1075 g, measures 36 mm in length, and is supplied in a pack size of 5 with RoHS compliance. Connection 1 functions as the actuator outlet with an SW36 design, while Connection 2 serves as the reducing outlet with an SW27 design. The component is classified with a corrosion resistance class of CRC 2 for moderate corrosion stress and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8085194 industrial component is a double-acting drive unit featuring a 25 mm piston diameter, an 80 mm stroke, and a ball bearing cage guide with a yoke structural design. Operating on compressed air within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi), it achieves a maximum speed of 0.8 m/s and a repetition accuracy of 0.02 mm or less. This unit includes external hydraulic cushioning, adjustable end-position ranges of 32 mm at the front and 30.4 mm at the rear, and position sensing via proximity switch for an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8078307 is a transparent industrial component measuring 5.4 mm in width, 11.6 mm in height, and 23 mm in length with a product weight of 0.3 g. Designed for clip mounting, this RoHS-compliant and halogen-free part accommodates cable diameters from 3.3 mm to 4.8 mm and features VDMA24364-B2-L LABS conformity alongside a corrosion resistance class of CRC 4 for particularly high corrosion stress within an ambient temperature range of -40 °C to 100 °C. Supplied in a pack size of 100, this component is available now. Submit the exact part number, quantity, and application requirements for a quote.
View product details →