Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8066438 is a single-acting gear rack/pinion valve actuator featuring an actuator size of 20, an F04 flange hole pattern, and a 90-degree swivel angle with an end-position adjusting range of -5 deg to 5 deg at both 0 deg and the nominal swivel angle. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) at a nominal operating pressure of 6 bar, this safety device incorporates a spring assembly that forces the actuator to a defined safety switching position when compressed air is switched off and the spring chamber is exhausted. It complies with ISO 5211 for standard valve connections, VDI/VDE 3845 (NAMUR) for valve connections, and VDI/VDE 3845 Size AA 1 for positioner and position sensor connection points, and is certified for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 8068912 is an industrial component featuring a die-cast aluminum plate and a product weight of 512 g with a width of 46 mm. It includes pneumatic connections 2 and 4 in G1/8 and G1/4 configurations, a corrosion resistance class of CRC 0 for no corrosion stress, and LABS conformity per VDMA24364-B1/B2-L. This RoHS-compliant unit carries a CE marking in accordance with the EU low voltage directive and incorporates a note on materials confirming compliance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8063593, features a nominal length of 48.5 mm, a mass moment of inertia of 39 kgmm², and a transferable torque of 21 Nm with a maximum rotational speed of 6000 rpm. Weighing 930 g, this unit utilizes actuator interface code N48 and motor input interface code 88A while maintaining an IP40 degree of protection and VDMA24364-B2-L LABS conformity. It operates within ambient temperatures of -10 °C to 60 °C, storage temperatures of -25 °C to 60 °C, and relative air humidity levels between 0 and 95% in any mounting position, incorporating RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8068911 is an industrial component featuring a die-cast aluminum plate and a product weight of 512 g with a width of 46 mm. This unit incorporates pneumatic connections 2 and 4 utilizing G1/8 or G1/4 ports, and includes a corrosion resistance class of CRC 0 for no corrosion stress. Materials note compliance with RoHS directives, VDMA24364-B1/B2-L LABS conformity, and a CE marking according to the EU low voltage directive. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8062770 is an electromechanical linear axis featuring a toothed belt with a 2 mm pitch, a size 45 designation, and a 500 mm working stroke driven by a 19.1 mm effective diameter drive pinion. Engineered with a recirculating ball bearing guide, this component achieves a maximum speed of 1.2 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm across a 100% duty cycle. It accommodates stepper or servo motors, permits any mounting position, provides position sensing via proximity switch or inductive sensors, and maintains an IP40 rating within an ambient temperature range of 0 °C to 50 °C. Certified for cleanroom ISO Class 7 operations, VDMA24364 Zone III LABS conformity, and reduced Cu/Zn/Ni battery production suitability, this unit is built for specialized industrial environments. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8066437 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 20 and an F03 flange hole pattern. It provides a 90-degree swivel angle, an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle, and a 10 mm shaft connection depth. Operating at a nominal operating pressure of 6 bar (0.6 MPa or 87 psi) within an operating pressure range of 2 bar to 8 bar, this safety device achieves its safety function via spring force and is certified for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Engineered by Festo with part number 8063592, this industrial component features a nominal length of 54 mm, a mass moment of inertia of 45 kgmm², and a transferable torque of 17 Nm. It accommodates a maximum rotational speed of 6000 rpm, integrates an actuator interface code of N48 alongside motor in interface codes 80P, 80PA, and 80RA, and weighs 620 g with RoHS compliance and VDMA24364-B2-L LABS conformity. The assembly functions in any mounting position across an ambient temperature range of -10 °C to 60 °C, supports storage temperatures from -25 °C to 60 °C, tolerates 0 to 95% relative air humidity, and maintains an IP40 degree of protection. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
This Festo industrial component, part number 8068790, is supplied in a pack size of 2 with a product weight of 15.5 g. The part features a corrosion resistance class of CRC 2 for moderate corrosion stress and complies with VDMA24364-B2-L LABS (PWIS) conformity alongside RoHS material requirements. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8063591, features a nominal length of 48.5 mm, a product weight of 653 g, and an IP40 degree of protection with RoHS-compliant materials. The unit accommodates an actuator interface code N48 and motor-in interface codes 70AA or 70AB, delivering a transferable torque of 21 Nm at a maximum rotational speed of 6000 rpm and a mass moment of inertia of 39 kgmm². Designed for any mounting position, it operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity from 0 to 95%, and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8062769 is an electromechanical linear axis featuring a toothed belt structural design with a size 45 footprint, a 300 mm working stroke, and a 19.1 mm drive pinion effective diameter. This component incorporates a recirculating ball bearing guide, supports stepper and servo motors, and achieves a maximum speed of 1.2 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm with a 100% duty cycle. Certified with an IP40 degree of protection and ISO 14644-1 Class 7 cleanroom suitability, it accommodates any mounting position and provides position sensing via proximity switches and inductive sensors. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8066436 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 20 and a 90-degree swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, it achieves safety integrity levels up to SIL 2 in low demand mode and SIL 1 in high demand mode, or up to SIL 3 in a redundant architecture. Operating pressure ranges from 0.2 MPa to 0.8 MPa (2 bar to 8 bar or 29 psi to 116 psi) with a nominal operating pressure of 0.3 MPa (3 bar or 43.5 psi), and the unit includes an F05 flange hole pattern conforming to ISO 5211. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8068789, has a product weight of 9.6 g and is supplied in a pack size of 2. The item features a corrosion resistance class (CRC) of 2 for moderate corrosion stress and complies with VDMA24364-B2-L LABS (PWIS) conformity alongside RoHS material regulations. Submit part number 8068789, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8063590 industrial component features an actuator interface code of N48 and a motor input interface code of 60PA with a transferable torque of 21 Nm and a maximum rotational speed of 6000 rpm. Weighing 604 g with a mass moment of inertia of 39 kgmm² and a nominal length of 48.5 mm, this RoHS compliant part operates in ambient temperatures from -10 °C to 60 °C, supports any mounting position, and provides IP40 protection alongside VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8068752 is a supply air flow control non-return valve featuring a QS-8 pneumatic connection 1 and an R1/8 pneumatic connection 2, actuated manually via a rotary knob with latch. Constructed with a PBT housing and a 13 mm width across flats, this component supports screw-in mounting in any position and provides a standard nominal flow rate of 170 l/min in the flow control direction alongside 130 l/min to 200 l/min in the non-return direction. It operates within an ambient temperature range of -10 °C to 60 °C and an operating pressure range of 0.02 MPa to 1 MPa using compressed air per ISO 8573-1:2010 [7:4:4], with ATEX explosion protection compliance for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8062768 is an electromechanical linear axis with a toothed belt featuring a size 45 designation, a 19.1 mm drive pinion effective diameter, a 2 mm toothed belt pitch, and a 200 mm working stroke with zero stroke reserve. This component incorporates a recirculating ball bearing guide, supports stepper or servo motors in any mounting position, achieves a maximum speed of 1.2 m/s, a maximum acceleration of 15 m/s2, and a repetition accuracy of ±0.1 mm with a 100% duty cycle. It provides position sensing via proximity switches or inductive sensors, IP40 protection, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and F1a reduction of Cu/Zn/Ni values for Li-ion battery production while operating in ambient temperatures from 0 °C to 50 °C and storage temperatures from -20 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8063588, features a nominal length of 62.4 mm, a mass moment of inertia of 14.5 kgmm², and a transferable torque of 12.5 Nm with a maximum rotational speed of 8000 rpm. Weighing 677 g, this RoHS compliant unit includes actuator interface code N38 and motor input interface code 72GA, achieving an IP40 degree of protection and VDMA24364-B2-L LABS conformity for installation in any mounting position. It operates within ambient temperatures from -10 °C to 60 °C, storage temperatures from -25 °C to 60 °C, and relative air humidity levels of 0 to 95%. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8066435 is a single-acting industrial component featuring a gear rack and pinion structural design with a size 20 valve actuator, an F04 flange hole pattern, and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar and a burst pressure of 24 bar, this safety device achieves its safety function via a spring assembly that switches the actuator to a defined position when compressed air is removed and the spring chamber is exhausted. It is certified for safety functions under ISO 13849 and IEC 61508 for use up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in redundant architectures. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo industrial component part number 8068751 is a supply air flow control non-return valve featuring a QS-6 pneumatic connection 1 and an R1/8 pneumatic connection 2. This device utilizes manual actuation via a rotary knob with a latch, features a PBT housing, and supports screw-in mounting in any position with a 13 mm width across flats. It operates within an ambient temperature range of -10 °C to 60 °C and an operating pressure range of 0.02 MPa to 1 MPa, utilizing compressed air as per ISO 8573-1:2010 [7:4:4] with oil lubrication operation possible. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22, it provides a standard nominal flow rate of 170 l/min in the flow control direction and 110 l/min to 200 l/min in the non-return direction. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered by Festo, part number 8063587 is an industrial component featuring a nominal length of 62.4 mm and an actuator interface code of N38 with a motor-in interface code of 68GA. The unit supports a maximum rotational speed of 8000 rpm, delivers a transferable torque of 12.5 Nm, and possesses a mass moment of inertia of 14.5 kgmm² at a product weight of 532 g. Built with RoHS-compliant materials and VDMA24364-B2-L LABS conformity, it operates at an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity between 0 and 95%, and an IP40 degree of protection in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8062201 is an industrial component featuring a flow control function and tapped mounting for 5.8 mm diameter sizing, operating within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and an ambient temperature range of -5 °C to 60 °C. It utilizes compressed air as per ISO 8573-1:2010 [7:4:4] with a nominal width of 0.7 mm to 1.8 mm, supports operation with oil lubrication, and carries c UL us recognition along with RoHS compliance and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →