Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8068740 is an industrial component featuring an exhaust air flow control non-return function with a QS-8 pneumatic connection 1 and an R3/8 pneumatic connection 2. Featuring manual actuation via a rotary knob with latch and a PBT housing material, this screw-in unit operates within a temperature range of -10 °C to 60 °C and supports operating pressures from 0.02 MPa to 1 MPa. It provides a standard nominal flow rate of 720 l/min in the flow control direction and is certified for ATEX zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8066425 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 20 and a 90-degree swivel angle. Operating at a nominal pressure of 6 bar (87 psi) within an operating range of 2 bar to 8 bar, this safety device incorporates an ISO 5211 standard valve connection and an F03 flange hole pattern. It provides a safety function that switches the actuator to a defined safety position via spring force when compressed air is switched off and the spring chamber is exhausted, achieving certifications for SIL 2 low demand mode, SIL 1 high demand mode, and up to SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered by Festo, part number 8063571 is an industrial component featuring an M80 actuator interface code and a 120GA motor-in interface code. This assembly delivers a transferable torque of 60 Nm and operates at a maximum rotational speed of 5500 rpm with a mass moment of inertia of 151 kgmm2. The unit weighs 1661 g, has a nominal length of 35 mm, offers IP40 degree of protection, and complies with VDMA24364-B2-L LABS conformity and RoHS material directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8061497 is an electromechanical linear axis featuring a ball screw with an 800 mm working stroke, a size 60 profile, and a 12 mm screw diameter with a 12 mm/U spindle pitch. This component integrates a recirculating ball bearing guide, supports stepper or servo motors, and achieves a maximum speed of 0.8 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm with a 0.15 mm reversing backlash. Designed for any mounting position, it offers a 100% duty cycle, position sensing via proximity switches or inductive sensors, and meets ISO 14644-1 Class 7 cleanroom standards along with VDMA24364 Zone III LABS conformity for Li-ion battery manufacturing with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8068739 is an industrial component featuring an exhaust air flow control non-return function with a QS-10 pneumatic connection 1 and an R1/4 pneumatic connection 2. It utilizes manual actuation via a rotary knob with latch, features a PBT housing, and supports screw-in mounting in any position. Operating pressure spans from 0.02 MPa to 1 MPa across an ambient temperature range of -10 °C to 60 °C, while meeting ATEX Zone 1, 2, 21, and 22 explosion protection standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8063569 industrial component features a nominal length of 67 mm, an M80 actuator interface code, and a 115GA motor-in interface code with a transferable torque of 60 Nm and a maximum rotational speed of 5500 rpm. Built with a mass moment of inertia of 151 kgmm² and a product weight of 1873 g, this RoHS-compliant unit operates within an ambient temperature range of -10 °C to 60 °C, supports an IP40 degree of protection, and meets VDMA24364-B2-L LABS conformity. It accommodates any mounting position, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo industrial component, part number 8066424, is a single-acting gear rack and pinion valve actuator featuring a size 20 design, an F05 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 degrees to 5 degrees. It operates within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) at a nominal operating pressure of 3 bar, withstands a burst pressure of 24 bar, and includes a safety function that switches the actuator to a defined safety position via spring force when compressed air is removed, achieving up to SIL 2 in low demand mode and SIL 3 in redundant architectures per ISO 13849 and IEC 61508. This unit provides a 12 mm shaft connection depth, an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR), and a VDI/VDE 3845 Size AA 1 connection point for positioners and position sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8061496 is an electromechanical linear axis with size 60 dimensions, a 600 mm working stroke, and an integrated ball screw featuring a 12 mm screw diameter and 12 mm/U spindle pitch. Driven by either a stepper or servo motor, this component achieves a maximum speed of 0.8 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm with a 0.15 mm reversing backlash. It incorporates a recirculating ball bearing guide, supports any mounting position, maintains a 100% duty cycle, and provides position sensing via proximity switch for inductive sensors. Certified for ISO 14644-1 Class 7 cleanrooms, VDMA24364 Zone III LABS conformity, and reduced Cu/Zn/Ni battery production, this unit is available by submitting the part number, required quantity, and application parameters for a formal quote.
View product details →
Festo
The Festo industrial component, part number 8068738, is an exhaust air flow control non-return valve featuring a QS-8 pneumatic connection 1 and an R1/4 pneumatic connection 2. Actuated manually via a rotary knob with a latch, this screw-in PBT housing unit supports an operating pressure range of 0.02 MPa to 1 MPa (0.2 bar to 10 bar) and functions within an ambient temperature of -10 °C to 60 °C. It delivers a standard nominal flow rate of 500 l/min in the flow control direction and 370 l/min to 500 l/min in the non-return direction, while carrying ATEX explosion protection certifications for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8063568 is an industrial component featuring an M80 actuator interface code and a 90GA motor input interface code, with a transferable torque of 60 Nm and a maximum rotational speed of 5500 rpm. Designed with a nominal length of 33 mm, a mass moment of inertia of 151 kgmm², and a product weight of 1332 g, it achieves an IP40 degree of protection and VDMA24364-B2-L LABS conformity with RoHS-compliant materials. This unit operates in ambient temperatures from -10 °C to 60 °C, relative air humidity between 0 and 95 percent, storage temperatures from -25 °C to 60 °C, and supports any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8066423 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 20 and an F04 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjusting range of -5 deg to 5 deg at both 0° and the nominal swivel angle, operating at a nominal pressure of 3 bar (43.5 psi) and an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi). Certified for safety functions to ISO 13849 and IEC 61508, the safety function switches the actuator to the defined safety switching position via spring force when compressed air is switched off and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8061495 is an electromechanical linear axis with a ball screw, featuring a size 60 structural design and a 500 mm working stroke. It incorporates a recirculating ball bearing guide, a 12 mm screw diameter, a 12 mm/U spindle pitch, and a reversing backlash of 0.15 mm, supporting a max speed of 0.8 m/s, a max rotational speed of 4000 rpm, and a repetition accuracy of ±0.01 mm with a 100% duty cycle. Configured for any mounting position with a stepper or servo motor, it provides position sensing via proximity switch or for inductive sensors while meeting ISO 14644-1 Class 7 cleanroom suitability and VDMA24364 Zone III LABS conformity with reduced Cu/Zn/Ni values for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8063567 is an industrial component with a nominal length of 27 mm, a product weight of 1279 g, and a mass moment of inertia of 151 kgmm². This component features an actuator interface code of M80, a motor-in interface code of 90GB, a transferable torque of 60 Nm, and a maximum rotational speed of 5500 rpm with any mounting position. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity from 0 to 95%, an IP40 degree of protection, VDMA24364-B2-L LABS (PWIS) conformity, and RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo industrial component, part number 8058981, features a size 86 designation, an actuator interface code of D60, and a motor-in interface code of 58AA. This unit supports any mounting position, achieves a maximum rotational speed of 5000 rpm, delivers a transferable torque of 9.5 Nm with a no-load driving torque of 0.25 Nm, and possesses a mass moment of inertia of 175 kgmm² alongside a product weight of 2500 g. It complies with VDMA24364-B2-L LABS conformity and RoHS material standards while operating within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity from 0 to 95%, and an IP40 degree of protection. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo industrial component, part number 8063566, features a nominal length of 26.5 mm, a mass moment of inertia of 151 kgmm², and a transferable torque of 48 Nm with a maximum rotational speed of 5500 rpm. Designed with M80 actuator and 68GA motor-in interface codes, this 911 g unit operates within an ambient temperature range of -10 °C to 60 °C and conforms to VDMA24364-B2-L LABS (PWIS) requirements. It is RoHS compliant, achieves an IP40 degree of protection, and supports installation in any mounting position under storage temperatures between -25 °C and 60 °C at 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo size 20 industrial component features a gear rack and pinion structural design with a single-acting mode of operation and a 90-degree swivel angle. Certified for safety functions to ISO 13849 and IEC 61508, the unit incorporates an ISO 5211 valve connection, VDI/VDE 3845 NAMUR compliance, and an operating pressure range of 2 bar to 8 bar. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8061494 is an electromechanical linear axis featuring a ball screw with a size of 60, a 400 mm working stroke, and a 12 mm screw diameter and spindle pitch. This component delivers a repetition accuracy of ±0.01 mm, a maximum speed of 0.8 m/s, a maximum acceleration of 15 m/s², and a 100% duty cycle while supporting both stepper and servo motor types. It includes a recirculating ball bearing guide, position sensing via proximity switches or inductive sensors, and meets ISO 14644-1 Class 7 cleanroom standards along with VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo industrial component, part number 8058980, is built with a size 86 frame and features a D60 actuator interface alongside a 57AA motor input interface. This unit operates at a maximum rotational speed of 5000 rpm, delivering a transferable torque of 9.5 Nm with a no-load driving torque of 0.25 Nm and a mass moment of inertia of 175 kgmm². Weighing 2500 g with RoHS compliance and VDMA24364-B2-L LABS conformity, it provides an IP40 degree of protection for any mounting position within ambient temperatures from -10 °C to 60 °C, relative air humidity from 0 to 95%, and storage temperatures between -25 °C and 60 °C. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8063565 is an industrial component featuring an M80 actuator interface code and an 80G motor input interface code with a nominal length of 19 mm. This part accommodates a transferable torque of 75 Nm, a maximum rotational speed of 5500 rpm, and a mass moment of inertia of 151 kgmm², operating within an ambient temperature range of -10 °C to 60 °C. Constructed with RoHS-compliant materials and conforming to VDMA24364-B2-L LABS (PWIS) standards, it achieves an IP40 degree of protection and weighs 846 g for installation in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8061493 is an electromechanical linear axis featuring a ball screw with a 300 mm working stroke, a size 60 profile, and a 12 mm screw diameter with a 12 mm/U spindle pitch. Engineered with a recirculating ball bearing guide and a reversing backlash of 0.15 mm, this unit supports stepper or servo motors, achieves a maximum speed of 0.8 m/s with $\pm$0.01 mm repetition accuracy, and operates at a 100% duty cycle in any mounting position. It conforms to VDMA24364 Zone III LABS conformity standards, meets ISO 14644-1 Class 7 cleanroom suitability, and is rated for the production of Li-ion batteries with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →