Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8001178
Vertical pressure shut-off plate VABF-S4-2-L1D2-C
The Festo 8001178 industrial component is built to ISO 15407-2 standards with an 18 mm width and a die-cast aluminum housing weighing 231 g. Operating at pressures up to 1 MPa and 10 bar within an ambient temperature range of -5 °C to 50 °C, this unit provides IP65 and NEMA 4 protection while utilizing compressed air per ISO 8573-1:2010 [7:4:4]. It supports vertical stacking on a manifold or individual sub-base and carries CE and UKCA markings in accordance with electrical equipment directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8022785
Pressure sensor SPAW-B2R-G12M-2PA-M12
The Festo 8022785 is a piezoresistive pressure sensor engineered to measure relative pressure across a range of -0.1 to 0.1 MPa (-1 to 1 bar, -14.5 to 14.5 psi) with an accuracy of 1 %FS and a repetition accuracy of 0.15 %FS. This component operates with compressed air as per ISO 8573-1:2010 [-:-:-], liquid media, and gaseous media within a medium temperature range of -20 °C to 85 °C and an ambient temperature range of 0 °C to 80 °C. It features two PNP switching outputs with freely programmable and switchable functions, a maximum output current of 250 mA, and a 4 to 20 mA analog output with a 3 ms rise time, supported by RCM, c UL us, CE, UKCA, and RoHS compliances. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8005028
Quarter turn actuator DAPS-0053-090-RS3-F0507-MW
This Festo industrial component features a size 0053 valve actuator with a kinematic yoke system and a single-acting mode of operation that closes to the right. Operating within a pressure range of 0.42 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, the unit incorporates an ISO 5211 flange hole pattern of F05 or F07, a 92-degree swivel angle, and a 19.3 mm depth shaft connection. Certified for use in ATEX Zone 1, Zone 2, Zone 21, and Zone 22 environments, the assembly provides safety integrity level SIL 2 compliance for both high and low demand modes. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8002375
Filter regulator LFR-1/4-D-7-MIDI-A-MPA
The Festo 8002375 is a D-series Midi filter regulator with a structural design incorporating a pressure gauge and a metal bowl guard. It features a rotary knob with detent actuator lock, a fully automatic condensate drain with a 43 cm³ max condensate volume, and a 40 µm grade of filtration. Operating at an input pressure of 2 bar to 12 bar, it provides a pressure regulation range of 0.5 bar to 7 bar with a normal nominal flow rate of 2100 l/min for compressed air or inert gases. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
8000870
Verkettungsplatte VABX-
The Festo part number 8000870 is an industrial component featuring a soft sealing principle and a lateral connection position with reverse polarity protection. It accommodates sizes 1, 2, or 3 with width dimensions of 10.55 mm, 12.55 mm, 16.05 mm, or 19.05 mm, valve sizes of 10 mm or 15 mm, and supports 1 to 4 valve positions in any mounting position. Integrated functions comprise an electric ejector pulse, electric ejector pulse valve, coding cover for internal or external control air supply control, flow control valve, pressure sensor, pressure transmitter, electric on-off valve, filter, and electric air-saving function, alongside diagnostics via LED and internal communication and vibration and shock resistance per specified standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8022784
Pressure sensor SPAW-P100R-G14F-2PA-M12
The Festo part number 8022784 is an industrial component utilizing a metal thin-film pressure sensor to measure relative pressure across a range of 0 MPa to 10 MPa (0 bar to 100 bar, 0 psi to 1450 psi) with an overload pressure rating of 20 MPa, 200 bar, or 2900 psi. It features an accuracy of 1 %FS, a repetition accuracy of 0.15 %FS, two programmable PNP switching outputs, and a 4-20 mA analog output with a 3 ms rise time. Operating within a medium temperature range of -20 °C to 85 °C and an ambient temperature range of 0 °C to 80 °C, this component processes compressed air as per ISO 8573-1:2010 [-:-:-], liquid media, and gaseous media. It carries RCM compliance, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8002374
Filter regulator LFR-1/4-D-MIDI-A-MPA
The Festo 8002374 is a Midi size Series D filter regulator with pressure gauge featuring a rotary knob with detent actuator lock and a fully automatic condensate drain. It offers an operating pressure of 2 bar to 12 bar, a pressure regulation range of 0.5 bar to 12 bar, and a normal nominal flow rate of 2000 l/min for compressed air as per ISO 8573-1:2010 [7:9:-] and inert gases. Designed for vertical mounting within ±5°, this component includes a 43 cm³ max condensate volume, a metal bowl guard, and a 40 µm grade of filtration. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
8005027
Quarter turn actuator DAPS-0053-090-RS2-F0507-MW
The Festo part number 8005027 is a single-acting industrial component featuring a kinematic yoke system with a 0053 actuator size and a 92-degree swivel angle. Operating within a pressure range of 0.35 MPa to 0.84 MPa, it includes an ISO 5211 flange hole pattern of F05 or F07, a 19.3 mm shaft connection depth, and one optionally adjustable end position closing to the right. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas, this model provides functional safety up to SIL 2 in both high and low demand modes without position sensing or cushioning. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8000850
Solenoid valve VUVX-...T1
The Festo part number 8000850 is an electrical industrial component featuring a piston slide structural design with a soft sealing principle and a piloted type of control. This unit accommodates multiple valve functions including 2x3/2 and 5-way configurations, operating at 24V DC with a standardized nominal flow rate ranging from 340 l/min to 1650 l/min and an operating pressure of -0.9 bar to 7 bar. It incorporates adjustable exhaust air function, external pilot air supply ports, signal status display, and mechanical or pneumatic spring reset methods across a width of 10.35 mm to 15.3 mm. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
8022783
Pressure sensor SPAW-P50R-G14F-2PA-M12
The Festo part number 8022783 is an industrial component utilizing a metal thin-film pressure sensor to measure relative pressure across a range of 0 to 5 MPa (0 to 50 bar or 0 to 725 psi) with an overload pressure rating of 10 MPa (100 bar or 1450 psi). This device accommodates compressed air as per ISO 8573-1:2010 [-:-:-], liquid media, and gaseous media at medium temperatures ranging from -20 °C to 85 °C, while operating within an ambient temperature range of 0 °C to 80 °C. It delivers an accuracy of 1 %FS, a repetition accuracy of 0.15 %FS, and features dual 2xPNP switching outputs with a maximum output current of 250 mA alongside a 4 - 20 mA analog output with a 3 ms rise time. Certified with RCM compliance and c UL us - Listed (OL) marks, the unit adheres to EU and UK directives for EMC and RoHS. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8002373
Filter regulator LFR-1/4-D-5M-MIDI-MPA
The Festo 8002373 is a Midi size Series D filter regulator with an integrated pressure gauge, featuring a structural design that combines filtration and pressure control. This component operates within a pressure range of 1 bar to 16 bar and a regulation range of 0.5 bar to 12 bar, delivering a normal nominal flow rate of 1600 l/min for compressed air or inert gases. Equipped with a 5 µm filtration grade, a manual rotating condensate drain, a 43 cm³ max condensate volume, and a metal bowl guard, the unit mounts vertically within ±5° and is secured via a rotary knob actuator lock with detent. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Danfoss Industrieautomatik
032U1266
Danfoss Industrieautomatik 032U1266 — Solenoid Valve
The Danfoss Industrieautomatik solenoid valve, part number 032U1266, is a servo-operated diaphragm component featuring a G 1 port size and a 22.0 mm nominal size within a brass housing. This normally closed (NC) device incorporates an FKM seal and operates within a differential pressure range of 0,3 to 10 bar across a media temperature span of -30 to 100 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8005026
Quarter turn actuator DAPS-0053-090-RS1-F0507-MW
The Festo part number 8005026 is a single-acting industrial component featuring a kinematic yoke system and a 0053 size valve actuator with F05 and F07 flange hole patterns. It delivers a 92-degree swivel angle, a 19.3 mm shaft connection depth, and one optionally adjustable end position with no cushioning. Operating at a nominal pressure of 0.56 MPa (5.6 bar) with an operating range from 0.28 MPa to 0.84 MPa, the unit incorporates VDI/VDE 3845 NAMUR valve connections, SIL 2 safety integrity levels for high and low demand modes, and ATEX/UKCA certifications for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8000815
Valve manifold VTUX-A-S-APA-
Engineered by Festo with part number 8000815, this electrical piston gate valve utilizes soft sealing and a piloted control type supporting internal or external pilot air supply ports. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of -1 bar to 7 bar and a pilot pressure of 1.5 bar to 7 bar, delivering a standardized nominal flow rate from 470 l/min to 690 l/min. The component features a tie rod mounting design with a width dimension of 10.55 mm to 16.05 mm, an ambient temperature range of -5 °C to 50 °C, adjustable exhaust air function, and CRC 1 low corrosion stress. Certified with c UL us - Listed (OL) and RCM compliance mark while carrying CE marking as per EU EMC and RoHS directives, it offers IP20, IP40, and IP65 protection degrees along with multiple configurable valve functions including 5/2-way, 5/3-way, and 2x3/2 configurations. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8022782
Pressure sensor SPAW-P25R-G14F-2PA-M12
The Festo part number 8022782 is an industrial component utilizing a metal thin-film pressure sensor to measure relative pressure across a range of 0 to 2.5 MPa, 0 to 25 bar, or 0 to 362.5 psi with an accuracy of 1 %FS and a repetition accuracy of 0.15 %FS. This device operates with compressed air as per ISO 8573-1:2010 [-:-:-], liquid media, and gaseous media within a medium temperature of -20 °C to 85 °C and an ambient temperature of 0 °C to 80 °C, featuring an overload pressure threshold of 5 MPa, 50 bar, or 725 psi. Electrical features include dual 2xPNP switching outputs with a freely programmable switching function, switchable switching element function, and a maximum output current of 250 mA, alongside a 4 to 20 mA analog output with a 3 ms rise time. Compliance certifications comprise RCM, c UL us-Listed (OL), CE marking per EU EMC and RoHS directives, UKCA marking to UK instructions for EMC and RoHS, and RoHS material compliance. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8002372
Filter regulator LFR-1/4-D-MIDI-MPA
The Festo part number 8002372 is a Series D Midi filter regulator with a structural design incorporating a pressure gauge and a rotary knob with detent for actuator locking. This unit operates within a pressure range of 1 bar to 16 bar, provides a pressure regulation range of 0.5 bar to 12 bar, and delivers a normal nominal flow rate of 2000 l/min for compressed air or inert gases. Featuring a 40 µm filtration grade, a manual rotating condensate drain, a 43 cm³ max condensate volume, and a metal bowl guard, it operates in a vertical ±5° mounting position with moderate corrosion stress resistance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8000810
Valve manifold VTUX-A-P-APA-
The Festo part number 8000810 is an electrically actuated industrial component featuring a piston gate valve structural design with a soft sealing principle and a piloted type of control. This unit operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of -1 bar to 7 bar, a pilot pressure range of 1.5 bar to 7 bar, and an ambient temperature range of -5 °C to 50 °C. It accommodates various valve functions including 2x3/2 and 5-way configurations, providing a standardized nominal flow rate from 470 l/min to 690 l/min with adjustable exhaust air function and tie rod mounting. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8005025
Quarter turn actuator DAPS-1920-090-R-F1216-MW-T6
The Festo part number 8005025 is a double-acting industrial component featuring a kinematic yoke system with a size 1920 valve actuator, a 92-degree swivel angle, and a 48.5 mm shaft connection depth. Operating at a nominal pressure of 0.56 MPa (5.6 bar) within a 0.3 MPa to 0.84 MPa range, this unit includes F12 and F16 flange hole patterns, ISO 5211 valve connections, and VDI/VDE 3845 NAMUR compliance without cushioning or position sensing. Certified by TÜV Nord (certificate 212170801) for ATEX Zone 1, Zone 2, Zone 21, Zone 22, and UK EX use with II 2G gas classification, it supports up to SIL 2 in both high and low demand modes while closing to the right in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8022781
Pressure sensor SPAW-P16R-G14F-2PA-M12
The Festo part number 8022781 is an industrial component utilizing a metal thin-film pressure sensor to measure relative pressure across a range of 0 to 1.6 MPa, 0 to 16 bar, or 0 to 232 psi, with an overload pressure rating of 3.2 MPa, 32 bar, or 464 psi. It operates with compressed air complying with ISO 8573-1:2010 [-:-:-], liquid media, and gaseous media within a medium temperature range of -20 °C to 85 °C and an ambient temperature range of 0 °C to 80 °C. Featuring an accuracy of 1 %FS, a repetition accuracy of 0.15 %FS, two freely programmable and switchable PNP switching outputs with a maximum output current of 250 mA, and a 4 - 20 mA analog output with a 3 ms rise time, the unit carries RCM compliance, c UL us - Listed (OL), CE, and UKCA markings while remaining RoHS compliant. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
8002371
Pressure regulator LR-1/2-D-7-MAXI-MPA
The Festo 8002371 is a Maxi size, Series D pilot-controlled piston control valve featuring a rotary knob with detent for actuator locking and a built-in pressure gauge. It delivers a constant output pressure with secondary exhausting across a regulation range of 0.5 bar to 7 bar, handling an operating pressure up to 16 bar and a normal nominal flow rate of 10700 l/min for compressed air or inert gases. Weighing 1200 g with a CRC rating of 2 and moderate corrosion stress resistance, this component operates within a temperature range of -10 °C to 60 °C and supports front panel mounting, in-line installation, or accessory mounting in any position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →