Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8069006
Shock absorber retainer DAYP-L8-25
The Festo industrial component, part number 8069006, features a size 25 configuration with a product weight of 224 g and supports any mounting position via through-hole installation. This unit is constructed with high-alloy stainless steel stops, galvanized steel stop screws and nuts, and material notes including RoHS compliance and copper-free construction, while achieving a CRC 1 low corrosion stress rating and VDMA24364-B1/B2-L LABS conformity for ambient temperatures between 0 °C and 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8063802
Linear actuator DLGF-...-40- -PPSA
The Festo 8063802 is a double-acting industrial component featuring a 40 mm piston diameter, an adjustable stroke from 50 mm to 1000 mm, and self-adjusting pneumatic end-position cushioning with a 12.9 mm cushioning length. Operating on compressed air according to ISO 8573-1:2010 [7:-:-] within a pressure range of 0.15 MPa to 0.8 MPa, this unit delivers a theoretical force of 754 N at 6 bar in both retracting and advancing directions. It incorporates a basic guide with recirculating ball bearings, positive locking driver principle, and position sensing via proximity switch, alongside a Class 6 cleanroom suitability rating per ISO 14644-14. Submit the exact part number, quantity, and application requirements to request a quote for this Festo component.
View product details →
Festo
8062794
Belt driven linear actuator ELGC-TB-KF-80-1800
The Festo 8062794 is an electromechanical linear axis featuring a toothed belt with a 3 mm pitch, an 80 size, a 33.42 mm drive pinion effective diameter, and a 1800 mm working stroke with 0 mm stroke reserve. Guided by a recirculating ball bearing and driven by either a stepper or servo motor, this IP40-rated component achieves a max speed of 1.5 m/s, a max acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm with a 100% duty cycle in any mounting position. Position sensing is accomplished via proximity switch or for inductive sensors, while its construction meets VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom standards, and reduced Cu/Zn/Ni values (F1a) for Li-ion battery production suitability within ambient temperatures of 0 °C to 50 °C and storage temperatures of -20 °C to 60 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →IMI-Norgren
WD1D-8DA-N1B
IMI-Norgren WD1D-8DA-N1B — Industrial Component
Source the IMI-Norgren WD1D-8DA-N1B industrial component directly for your facility's integration needs. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8069005
Shock absorber retainer DAYP-L8-20
The Festo 8069005 industrial component features a size 20 specification and weighs 165 g with a through-hole mounting type supporting any mounting position. Constructed with high-alloy stainless steel stops, galvanized steel stop screws and nuts, and RoHS-compliant, copper-free materials, this part has a CRC 1 low corrosion stress rating and VDMA24364-B1/B2-L LABS conformity for ambient temperatures between 0 °C and 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8066459
Quarter turn actuator DFPD-N-160-RP-90-RS60-F0710-R3-EP
The Festo part number 8066459 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 160 and a 90-degree swivel angle. Operating within a pressure range of 2 bar to 8 bar, this safety device includes an adjustable end-position range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle, and incorporates an ISO 5211 standard connection for valves. Certified for safety functions to ISO 13849 and IEC 61508, the unit provides safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and up to SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8063801
Linear actuator DLGF-...-32- -PPSA
The Festo part number 8063801 is a double-acting industrial component with a 32 mm piston diameter and an adjustable stroke length from 50 mm to 1000 mm. Operating on compressed air according to ISO 8573-1:2010 [7:-:-] at pressures between 0.15 MPa and 0.8 MPa, this unit delivers a theoretical force of 483 N in both retracting and advancing directions at 6 bar. It features self-adjusting pneumatic end-position cushioning with an 11.6 mm cushioning length, a basic guide with a recirculating ball bearing, and positive locking slot driver principle. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8062793
Belt driven linear actuator ELGC-TB-KF-80-1500
The Festo 8062793 is an electromechanical linear axis with a toothed belt featuring a size 80 frame, a 33.42 mm drive pinion effective diameter, a 3 mm toothed belt pitch, and a 1500 mm working stroke with 0 mm stroke reserve. Guided by a recirculating ball bearing and compatible with stepper or servo motors, this unit achieves a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm for 100% duty cycle operations. Operating within ambient temperatures of 0 °C to 50 °C, the IP40-rated assembly includes position sensing via proximity switches or inductive sensors and meets ISO 14644-1 Class 7 cleanroom standards, VDMA24364 Zone III LABS conformity, and reduced Cu/Zn/Ni specifications for Li-ion battery manufacturing. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
8069004
Shock absorber DYSS-12-12-Y1F
The Festo 8069004 is a size 12 industrial component operating as a single-acting push type with a 12 mm stroke and 12 mm cushioning length. This unit features self-adjusting cushioning, supports any mounting position without position sensing, and delivers a max stop force of 1000 N, a max impact velocity of 1.5 m/s, and a max energy absorption of 10 J per stroke. It operates within an ambient temperature range of -5 °C to 80 °C, features a corrosion resistance class of 2 for moderate corrosion stress, and complies with VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →IMI-Norgren
WD1D-8DA-N1A
IMI-Norgren WD1D-8DA-N1A — Industrial Component
The IMI-Norgren WD1D-8DA-N1A is an industrial component manufactured by IMI-Norgren. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8063800
Linear actuator DLGF-...-25- -PPSA
The Festo part number 8063800 is a double-acting industrial component featuring a 25 mm piston diameter, an adjustable stroke length from 50 mm to 1000 mm, and a basic guide with recirculating ball bearings utilizing a positive locking driver principle. Operating within a pressure range of 0.15 MPa to 0.8 MPa utilizing compressed air conforming to ISO 8573-1:2010 [7:-:-], this unit delivers a theoretical force of 295 N both advancing and retracting at 6 bar. It incorporates self-adjusting pneumatic end-position cushioning with a 9 mm cushioning length, proximity switch position sensing, and an ambient temperature range of 0 °C to 60 °C, alongside ISO 14644-1 cleanroom suitability class 6. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8069003
Shock absorber DYSS-10-10-Y1F
The Festo part number 8069003 is a size 10 industrial component operating in a single-acting pushing mode with a 10 mm stroke and self-adjusting cushioning. This unit features an ambient temperature range of -10 °C to 80 °C, a corrosion resistance class of 2 for moderate stress, and VDMA24364-B2-L LABS conformity for any mounting position without position sensing. It accommodates a max impact velocity of 1.5 m/s, a max stop force of 700 N, a max tightening torque of 8 Nm, and a max energy absorption of 6 J per stroke up to 25000 J per hour. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8066458
Quarter turn actuator DFPD-N-160-RP-90-RS30-F0710-R3-EP
The Festo part number 8066458 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 160 and an F0710 flange hole pattern. Operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi) at a nominal operating pressure of 3 bar (43.5 psi), this safety device provides a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. It incorporates an ISO 5211 standard connection for valves, a VDI/VDE 3845 NAMUR valve connection, a VDI/VDE 3845 Size AA 1 connection point for positioners and position sensors, and a 24 mm shaft connection depth that can be mounted in any position. Certified for safety functions to ISO 13849 and IEC 61508, the safety function executes via spring force to switch the actuator to the defined safety position when compressed air is switched off and the spring chamber is exhausted, achieving up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
8062792
Belt driven linear actuator ELGC-TB-KF-80-1200
The Festo 8062792 is an electromechanical linear axis with a toothed belt featuring a size 80 frame, a 33.42 mm drive pinion effective diameter, a 3 mm toothed belt pitch, and a 1200 mm working stroke utilizing an integrated recirculating ball bearing guide. This unit delivers a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.1 mm across a 100% duty cycle, with position sensing via proximity switch or inductive sensors for compatible stepper and servo motors. Certified with VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and reduced Cu/Zn/Ni values for Li-ion battery production, the IP40-rated assembly operates in ambient temperatures from 0 °C to 50 °C in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8063799
Linear actuator DLGF-...-20- -PPSA
The Festo 8063799 is a double-acting industrial component featuring a 20 mm piston diameter, an adjustable stroke range from 50 mm to 1000 mm, and self-adjusting pneumatic end-position cushioning with a 9.6 mm cushioning length. Operating within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar), this unit delivers a theoretical force of 188 N in both advancing and retracting directions when supplied with 6 bar compressed air conforming to ISO 8573-1:2010 [7:-:-]. It utilizes a basic guide with a recirculating ball bearing, positive locking driver principle, and proximity switch position sensing, while accommodating any mounting position and offering variants with or without mounting holes. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8069002
Shock absorber DYSS-8-8-Y1F
The Festo part number 8069002 is a single-acting industrial component featuring a size 8 specification, an 8 mm stroke, and self-adjusting cushioning with an 8 mm cushioning length. It operates in any mounting position with a pushing mode of operation, no position sensing, a maximum impact velocity of 1.5 m/s, and a maximum stop force of 500 N. Designed with a corrosion resistance class of 2 and VDMA24364-B2-L LABS conformity, this unit functions within an ambient temperature range of -10 °C to 80 °C while delivering a maximum energy absorption per stroke of 3 J and a maximum energy absorption per hour of 18000 J. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →IMI-Norgren
802004003
IMI-Norgren 802004003 — Industrial Component
This industrial component is manufactured by IMI-Norgren under part number 802004003. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8063639
Dispense head VTOE-8-D9-T3-M22C-08-F-P-P-M
The Festo 8063639 is a directly controlled 2/2-way closed monostable industrial component featuring a soft sealing principle, a nominal width of 0.8 mm, and an internal volume of 113 µl with fluid connections. This 9 mm wide assembly incorporates a 1 mm wide by 30 mm long dosing needle, enabling a minimum dosing volume of 5 µl and a water flow rate of 2000 µl/s at a maximum operating pressure of 0.05 MPa (0.5 bar, 7.25 psi). Featuring an any-position mounting capability and a mechanical spring reset method, the unit achieves a maximum switching frequency of 4 Hz with a 7 ms on-switching time and a 2 ms off-switching time. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8066457
Quarter turn actuator DFPD-N-120-RP-90-RS60-F0507-R3-EP
The Festo part number 8066457 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 120, an F0507 flange hole pattern, and a nominal swivel angle of 90 degrees. This safety device operates at a nominal pressure of 6 bar (87 psi) across an operating pressure range of 2 bar to 8 bar, incorporating a spring assembly that switches the actuator to a defined safety position when compressed air is removed and the spring chamber is exhausted. Certified to ISO 13849 and IEC 61508, the unit provides safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture, featuring a VDI/VDE 3845 NAMUR standard valve connection and VDI/VDE 3845 Size AA 1 positioner connection point. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
8062791
Belt driven linear actuator ELGC-TB-KF-80-1000
The Festo 8062791 is an electromechanical linear axis featuring a toothed belt with a 3 mm pitch, a size 80 frame, a 33.42 mm drive pinion effective diameter, and a 1000 mm working stroke incorporating a recirculating ball bearing guide. This component supports any mounting position, accommodates stepper or servo motors, allows position sensing via proximity switches or inductive sensors, and achieves a maximum acceleration of 15 m/s², a maximum speed of 1.5 m/s, and a repetition accuracy of ±0.1 mm at a 100% duty cycle. Rated to IP40 with an ambient operating temperature range of 0 °C to 50 °C and storage between -20 °C and 60 °C, the unit conforms to VDMA24364 Zone III LABS, meets ISO 14644-1 Class 7 cleanroom standards, and is suited for Li-ion battery production with reduced Cu/Zn/Ni values (F1a). Submit part number 8062791, quantity, and application requirements for a formal quote.
View product details →