Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8201000 is an industrial drive shaft adapter featuring a size 25 structural design with a quenched and tempered steel drive shaft adapter material. This component weighs 160 g, supports any mounting position via through-hole and centering sleeve, and accommodates a piston diameter of Ø25 with a maximum bending moment of 10 Nm and a maximum static axial load of 450 N. It operates within ambient temperatures of 0 °C to 60 °C, exhibits a corrosion resistance class of CRC 1, complies with VDMA24364-C1-L LABS conformity and RoHS material notes, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values (F1a) alongside ISO 14644-1 Class 9 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8197468 is an industrial component featuring an actuator interface code of N48 and motor-in interface codes of 60P and 60PA, with a transferable torque of 12.5 Nm and a max rotational speed of 8000 rpm. This RoHS compliant part has a nominal length of 41 mm, a product weight of 328 g, a mass moment of inertia of 14.5 kgmm², and an IP40 degree of protection. It supports any mounting position, VDMA24364-B2-L LABS conformity, an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8207226 is an industrial component designed for grippers featuring size 16 and any mounting position. Weighing 42 g with RoHS compliance and CRC 2 moderate corrosion stress resistance, it utilizes a wrought aluminum alloy anodized gripper jaw, plate, and finger, alongside a POM cap, galvanized steel screws, and a steel centering pin adhering to VDMA24364 Zone III LABS conformity. This unit mounts directly via screws onto a pneumatic gripper and operates within an ambient temperature range of -5 °C to 50 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8200999 is a size 20 drive shaft adapter for piston diameters of 20 mm, constructed from quenched and tempered steel with a product weight of 93 g. This industrial component features a corrosion resistance class of 1, VDMA24364-C1-L LABS conformity, RoHS compliance, and ISO 14644-1 Class 9 cleanroom suitability while supporting battery production with reduced Cu, Zn, and Ni values. It mounts in any position via a through-hole and centering sleeve, withstanding a maximum static axial load of 350 N, a maximum bending moment of 5 Nm, storage temperatures from -20 °C to 60 °C, and ambient operating temperatures from 0 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8192254 is an electromechanical linear axis featuring a size 60 structural design with a ball screw, a 200 mm working stroke, and a 12 mm screw diameter with a 5 mm/U spindle pitch. This component integrates a recirculating ball bearing guide, accommodates stepper or servo motors, and achieves a maximum speed of 0.6 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm with a 100% duty cycle. It provides a ball screw reversing backlash of ±0.02 mm, incremental linear potentiometer measurement, position sensing for inductive sensors, and VDMA24364-C1-L LABS conformity while being suitable for Li-ion battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8197467 is an industrial component featuring a nominal length of 42 mm, a product weight of 401 g, and a mass moment of inertia of 14.5 kgmm², configured with actuator interface code N48 and motor input interface code 40G. This assembly supports a transferable torque of 12.5 Nm at a maximum rotational speed of 8000 rpm, operates within an ambient temperature range of -10 °C to 60 °C, and maintains an IP40 degree of protection with VDMA24364-B2-L LABS conformity. Constructed with RoHS-compliant materials for any mounting position, it tolerates storage temperatures from -25 °C to 60 °C and relative air humidity levels between 0 and 95%. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8207225 industrial component operates on a 24 V DC nominal voltage with an operating range of 19.2 to 30 V DC, a current consumption of 120 mA, and a maximum power supply of 6 A. This IP20-rated, protection class III device features a dual core 500 MHz CPU, 12 digital inputs, LED status indications, and a socket strip I/O electrical connection with a 3.5 mm grid. Weighing 270 g, the unit is constructed in compliance with RoHS standards, VDMA24364-B2-L LABS conformity, and CRC 0 corrosion resistance, while meeting EN 61131-2 standards for vibration and shock resistance within an ambient temperature range of 0 °C to 55 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8200998 is an industrial drive shaft adapter of size 16 constructed from quenched and tempered steel with a product weight of 75 g. Featuring a corrosion resistance class of 1 and VDMA24364-C1-L LABS conformity, this RoHS compliant component accommodates a maximum static axial load of 140 N, a maximum bending moment of 4 Nm, and mounts in any position via a through-hole and centering sleeve. It is suitable for battery production with reduced Cu/Zn/Ni values (F1a) and meets ISO 14644-1 Class 9 cleanroom suitability for operating ambient temperatures between 0 °C and 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8197466, features a nominal length of 44 mm, a mass moment of inertia of 14.5 kgmm², a transferable torque of 12.5 Nm, and a product weight of 504 g. The unit supports any mounting position, a maximum rotational speed of 8000 rpm, an actuator interface code of N48, and a motor-in interface code of 87A, with RoHS-compliant materials and VDMA24364-B2-L LABS conformity. Operating parameters include an ambient temperature range of -10 °C to 60 °C, storage temperatures between -25 °C and 60 °C, 0 to 95% relative air humidity, and an IP40 degree of protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8192253 is an electromechanical linear axis featuring a ball screw structural design with a 60 size, 100 mm working stroke, 12 mm screw diameter, and 5 mm/U spindle pitch. Engineered with a recirculating ball bearing guide and a ball screw reversing backlash of ±0.02 mm, this component achieves a maximum speed of 0.6 m/s, a maximum rotational speed of 6667 rpm, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm. It supports 100% duty cycle operation with either a stepper or servo motor, incorporates an incremental linear potentiometer for position sensing, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) alongside VDMA24364-C1-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8206421 is an industrial component featuring a valve manifold design with interchangeable valve sizes and a lateral connection position, compatible with the VTUX-A-P valve manifold. Measuring 49.9 mm x 117.4 mm x 53.9 mm in width, length, and height, this size 1 | 2 unit supports a maximum of 24 solenoid coils and operates at a nominal DC load voltage of 24 V, requiring SELV/PELV fixed power supplies. It carries RCM compliance, KC-EMV, CE, and UKCA markings, demonstrates a contamination level of 2, and achieves a corrosion resistance class of 2 with a degree of protection rated at IP40. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8200997 is a size 12 drive shaft adapter featuring a quenched and tempered steel construction with a low corrosion stress rating (CRC 1) and VDMA24364-C1-L LABS conformity. This component supports a maximum static axial load of 80 N, a maximum bending moment of 2 Nm, and mounts in any position via a through-hole and centering sleeve. It complies with RoHS regulations and meets ISO 14644-1 Class 9 cleanroom suitability as well as F1a specifications for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 8197465, features a nominal length of 46 mm, a mass moment of inertia of 39 kgmm², and a transferable torque of 21 Nm with a maximum rotational speed of 6000 rpm. This RoHS-compliant unit incorporates an actuator interface code N48 and a motor input interface code 60H, while offering IP40 protection and VDMA24364-B2-L LABS conformity for any mounting position. Operating within an ambient temperature range of -10 °C to 60 °C and storage temperatures between -25 °C and 60 °C, the 452 g assembly withstands relative air humidity levels from 0 to 95%. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8200780 is a double-acting pneumatic parallel gripper featuring two jaws with an 80 mm complete stroke, a 40 mm stroke per jaw, and a heavy-duty guide mechanism utilizing a double piston, piston gate valve, T-shape design, and gear rack/pinion. It operates within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, or 29 psi to 116 psi) and achieves a repetition accuracy of 0.03 mm, with a maximum angular play of 0.2 degrees and a jaw backlash of 0.05 mm. This component includes elastic cushioning rings at both ends without a fixed metal stop, permits mounting in any position, and supports position sensing via proximity switch alongside specific material restrictions excluding mass copper, zinc, and nickel. Please submit your exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 8197464, features a nominal length of 59 mm, a product weight of 851 g, and a mass moment of inertia of 39 kgmm² with a transferable torque of 17 Nm. It operates at a maximum rotational speed of 6000 rpm in any mounting position and complies with VDMA24364-B2-L LABS conformity and RoHS material restrictions. The unit functions within an ambient temperature range of -10 °C to 60 °C, storage temperatures between -25 °C and 60 °C, and relative air humidity levels of 0 to 95%, while maintaining an IP40 degree of protection and utilizing actuator interface code N48 and motor input interface code 100A. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8191934 is an industrial 2-way ball valve featuring a quarter turn pneumatic actuator and a soft sealing principle for in-line installation in any mounting position. Built with an Rp2 1/2 fitting connection, an F07 flange hole pattern, and a nominal width DN of 63, this 2/2 reversible flow valve operates at a nominal pressure PN of 25 and an operating pressure range of 0.55 MPa to 0.8 MPa. It handles a flow rate Kv of 535 m³/h across a medium temperature range of -10 °C to 200 °C, utilizing compressed air, inert gas, water without water vapor, or neutral liquids. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered with an ether-based TPE-U material, the Festo 8205522 industrial component is a tubing solution featuring a 12 mm outside diameter, an 8 mm inside diameter, and a 33 mm minimum bending radius. It operates within a temperature range of -35 °C to 60 °C at pressures from -0.095 MPa to 1 MPa, utilizing compressed air conforming to ISO 8573-1:2010 [7:-:-] or liquid, ice-free water. This TÜV-certified product is suitable for energy chains and battery production with reduced Cu/Zn/Ni values while carrying a UL94 HB material fire test rating and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8197463 industrial component features a nominal length of 41 mm, a product weight of 374 g, and an actuator interface code of N38 with a motor-in interface code of 60H. This part delivers a transferable torque of 16 Nm at a maximum rotational speed of 8000 rpm, exhibiting a mass moment of inertia of 14.5 kgmm² and an IP40 degree of protection. Operating within an ambient temperature range of -10 °C to 60 °C and storage temperatures from -25 °C to 60 °C, it accommodates 0 to 95% relative air humidity in any mounting position while meeting VDMA24364-B2-L LABS conformity and RoHS material directives. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8191933 is a 2-way pneumatic soft-sealed ball valve featuring a quarter turn actuator and an Rp2 fitting connection. This in-line mountable component operates at pressures ranging from 0.55 MPa to 0.8 MPa (5.5 bar to 8 bar, 79.75 psi to 116 psi) with a nominal pressure PN of 25 and a nominal width DN of 50. It handles media temperatures from -10 °C to 200 °C, delivering a flow rate Kv of 292 m³/h based on EN 10226-1 and ISO 5211 norms. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo industrial component (part number 8200779) is a double-acting pneumatic parallel gripper featuring two jaws, a size 32 designation, a complete stroke of 40 mm, and a stroke per gripper jaw of 20 mm. Its structural design incorporates a double piston, guide, piston gate valve, T-shape, gear rack/pinion, and heavy-duty guide, delivering a repetition accuracy of 0.03 mm, maximum gripper jaw angular play ax, ay of 0.2 deg, and maximum gripper jaw backlash Sz of 0.05 mm. The unit operates within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi) with elastic cushioning rings or pads at both ends without a fixed metal stop, achieving a minimum opening time of 96 ms and closing time of 70 ms at 6 bar. Position sensing is accomplished via proximity switch, and position variants exclude metals with copper, zinc, or nickel by mass as the main constituent with specific exceptions. Submit the exact part number, quantity, and application requirements to receive an RFQ.
View product details →