Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8143713 is a double-acting pneumatic parallel gripper featuring a size 16 design, a complete stroke of 32 mm, and 16 mm of stroke per gripper jaw utilizing a gear rack and pinion mechanism with ball guides. Operating at pressures from 1 bar to 7 bar (14.5 psi to 101.5 psi), this two-jaw component achieves a repetition accuracy of 0.06 mm, elastic cushioning rings at both ends, zero jaw angular play, and zero backlash with a maximum operating frequency of 1 Hz. It includes position sensing via proximity switch, allows any mounting position, and excludes specific metals with copper, zinc, or nickel by mass as the main constituent. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo electromechanical linear axis features a size 120 structural design with a 600 mm working stroke, a 15 mm screw diameter, and a 20 mm/U spindle pitch utilizing a ball screw. It accommodates stepper or servo motors up to a maximum rotational speed of 3000 rpm, delivering a maximum speed of 1 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.02 mm with a 100% duty cycle. The unit includes a recirculating ball bearing guide, exhibits a reversing backlash of 150 µm, features VDMA24364 Zone III LABS conformity, and is classified as ISO 14644-1 Class 8 cleanroom suitable as well as F1a compliant for Li-ion battery production with restricted Cu/Zn/Ni material variants. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8141750 industrial component is a planetary gear set featuring an 8:1 gear ratio, an 80 mm gearbox flange size, and a 100 mm motor flange size with an 80G output shaft interface and a 100A actuator interface. It achieves a continuous output torque of 50 Nm, a maximum output torque of 80 Nm, a torsional backlash of 0.12 degrees, a torsional rigidity of 8.4 Nm/arcmin, and a maximum efficiency of 97 percent while supporting a maximum actuator speed of 7000 rpm. Weighing 2300 g with a gearbox mass moment of inertia of 0.37 kgcm², this RoHS compliant unit operates within a temperature range of -25 °C to 90 °C, provides an IP54 degree of protection, conforms to VDMA24364-B2-L LABS standards, and permits an axial shaft load of 1000 N alongside a radial shaft load of 750 N. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8137094 is an industrial component utilizing a mechanical and electrical measuring principle with a contact-based switching output and a single-pin toggle switch element function. It features an Omron SS-5 microswitch, supports an operating voltage range of 0 V to 230 V AC and 0 V to 30 V DC with a maximum output current of 3 A for both AC and DC, and operates within an ambient temperature range of -20 °C to 80 °C. Certified to SIL 3 with documentation issued by Eurocert under SIL202587141, the unit carries c CSA us (OL) certification alongside CE and UKCA markings compliant with relevant EU and UK directives and RoHS standards. Electrical integration is achieved via a 10-pin straight terminal strip utilizing screw and spring-loaded terminals. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8143712 is a size 16 pneumatic industrial component featuring a parallel gripper function with two gripper jaws, a complete stroke of 16 mm, and a stroke of 8 mm per jaw. Utilizing a double-acting actuator system with elastic cushioning rings or pads at both ends, it delivers a repetition accuracy of 0.06 mm and operates within a pressure range of 1 bar to 7 bar (14.5 psi to 101.5 psi). This flat-mounting flat structural design incorporates a gear rack and pinion with a ball guide, allowing zero angular play and zero backlash, while supporting position sensing via proximity switches. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 8141749 is an industrial miter gear component featuring an 80 mm gearbox flange size, a 100 mm motor flange size, and a 20:1 gear ratio designed to handle a continuous output torque of 120 Nm and a maximum output torque of 240 Nm. Built with an IP54 degree of protection, a 0.25 deg torsional backlash, a 5.1 Nm/arcmin torsional rigidity, and an operating temperature range of -25 °C to 90 °C, this RoHS-compliant unit accommodates a maximum actuator speed of 7000 rpm and a max efficiency of 93%. It weighs 5100 g with a mass moment of inertia of 1.013 kgcm², an 80G output shaft interface, a 100A actuator interface, VDMA24364-B2-L LABS conformity, and permissible shaft loads of 1000 N axial and 750 N radial. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8124501 is an electromechanical linear axis featuring a ball screw with a size of 120, a working stroke of 550 mm, and a spindle pitch of 20 mm/U. This unit integrates a recirculating ball bearing guide, accommodates either a stepper or servo motor, and achieves a maximum speed of 1 m/s alongside a repetition accuracy of ±0.02 mm. Built with VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 8 cleanroom suitability, and reduced Cu/Zn/Ni values for Li-ion battery manufacturing, it operates at a 100% duty cycle in any mounting position. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8137093 is an industrial component featuring CE marking as per the EU explosion protection directive (ATEX) and EU RoHS directive, alongside UKCA marking according to UK EX and RoHS instructions. It provides explosion prevention and protection for ATEX/CN/IEC-EX/UKEX Zone 0, Zone 1, Zone 2, Zone 20, Zone 21, and Zone 22, with an ATEX category gas of II 1G, ignition protection Ex ia IIC T6/T5 Ga, ATEX category dust of II 1D, and dust ignition protection Ex ia IIIC Txx°C Da. Certified by Eurocert, FTZU, and GYJ under certificates including SIL202587141, FTZU 17 ATEX 0105X, GYJ20.1409X, and IECEx FTZU 17.0017X, the unit operates with a maximum input voltage Vi of 30 V, negligibly small effective internal inductance Li and capacitance Ci, explosive ambient temperatures detailed in the ATEX and IECEx certificates, and RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component features a 12:1 miter gear ratio, an 80 mm gearbox flange size, and a 100 mm motor flange size, delivering a continuous output torque of 120 Nm and a maximum output torque of 240 Nm. Built with an IP54 degree of protection, a mass moment of inertia of 1.379 kgcm², a torsional backlash of 0.25 deg, and a maximum actuator speed of 7000 rpm, the unit supports an operating temperature range of -25 °C to 90 °C, an axial shaft load of 1000 N, and a radial shaft load of 750 N while weighing 5100 g with RoHS compliance and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo Motion App GAMM-A10 is an industrial component detailed in the official Festo EN-US data sheet. It features a controlled flow rate accuracy of plus or minus 4 l/min, while the actuated flow rate accuracy is not specified. Request a formal quote for part number 8143568 by submitting your exact quantity and application requirements.
View product details →
Festo
The Festo 8124500 is an electromechanical linear axis featuring a ball screw with a size 120, a 500 mm working stroke, and a 20 mm/U spindle pitch. Designed with a recirculating ball bearing guide and a 15 mm screw diameter, this component operates at a maximum speed of 1 m/s, a maximum rotational speed of 3000 rpm, and an acceleration rate up to 15 m/s² with a repetition accuracy of ±0.02 mm and a 100% duty cycle. It provides VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 8 cleanroom suitability, and restricted metal variants making it suitable for the production of Li-ion batteries with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8141747 industrial component features an 8:1 miter gear ratio with an 80 mm gearbox flange size and a 100 mm motor flange size, delivering a continuous output torque of 50 Nm and a maximum output torque of 190 Nm. Engineered with a 0.22 degree torsional backlash, a torsional rigidity of 4.2 Nm/arcmin, and an operating temperature range of -25 °C to 90 °C, this 4500 g unit supports a maximum actuator speed of 7000 rpm and achieves 94% maximum efficiency while maintaining IP54 protection and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a quote on this RoHS compliant unit.
View product details →
Festo
The Festo Remote Commissioning GFCH-3-G-R, part number 8136847, provides seven hours of on-site technical services including data backup, Festo Automation Suite software introduction, configuration and parameterization, system testing, electrical and travel path checks, and remote commissioning support for 3-axis systems with a safety module. Service provision requires 8 to 10 days subject to agreement, and customers must ensure mechanical assembly of the YJKP kit, required voltages, local software installations, administrator rights, communication tools, and qualified personnel presence. Submit the exact part number, quantity, and application requirements to request a formal quote for this service.
View product details →
Festo
The Festo part number 8143427 is a double-acting pneumatic parallel gripper featuring two jaws, a size 20 designation, an 80 mm complete stroke, and a 40 mm stroke per gripper jaw. Operating at pressures from 0.1 MPa to 0.7 MPa (1 bar to 7 bar / 14.5 psi to 101.5 psi), this component utilizes a gear rack/pinion structural design with a ball guide, elastic cushioning rings or pads at both ends, and achieves a repetition accuracy of 0.06 mm with zero angular play and zero backlash. It supports position sensing via proximity switch, allows mounting in any position, features a max operating frequency of 1 Hz, and restricts specific metal constituents in its variants while offering a minimum opening time of 240 ms at 6 bar without gripping force backup. Submit the exact part number, quantity, and application requirements to request a formal quote for this item.
View product details →
Festo
The Festo 8124499 is an electromechanical linear axis featuring a ball screw with a 15 mm screw diameter, 20 mm/U spindle pitch, and 450 mm working stroke. Designed with a size 120 profile and a recirculating ball bearing guide, this unit operates at a 100% duty cycle, delivering a maximum speed of 1 m/s, maximum acceleration of 15 m/s², and repetition accuracy of ±0.02 mm. It accommodates either a stepper motor or servo motor up to 3000 rpm max rotational speed, incorporates VDMA24364 Zone III LABS conformity, meets ISO 14644-1 Class 8 cleanroom standards, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8141746 industrial component features an 80 mm gearbox and motor flange size with a 20:1 miter gear ratio, delivering a continuous output torque of 120 Nm and a maximum output torque of 192 Nm. Operating within a temperature range of -25 °C to 90 °C, this IP54-rated unit accommodates a maximum actuator speed of 7000 rpm while maintaining a torsional backlash of 0.25 deg and a mass moment of inertia of 1.013 kgcm². The RoHS-compliant assembly weighs 5000 g and supports a maximum efficiency of 93 %, a torsional rigidity of 5.1 Nm/arcmin, and permissible axial and radial shaft loads of 1000 N and 750 N, respectively. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Festo offers the Remote commissioning GFCH-2-G-R, designated as part number 8136846, encompassing five hours of on-site work for data backup, documentation, Festo Automation Suite software introduction, configuration, parameterization, system testing, electrical and travel path checks, and remote support for 2-axis systems with a safety module. Service provision requires 8 to 10 days subject to agreement, and customers must provide mechanical assembly of the YJKP kit, required voltages, network infrastructure, pre-installed software including FFT, TeamViewer or Bomgar, administrator rights, a stable internet connection, and qualified personnel on site. Submit exact part numbers, quantities, and application requirements to request a quote for this service.
View product details →
Festo
This Festo industrial component (Part Number: 8143426) is a double-acting pneumatic parallel gripper featuring two jaws, a size 20 designation, a 40 mm complete stroke, and a 20 mm stroke per gripper jaw. The structural design incorporates a flat mounting type for gripper fingers, a gear rack and pinion mechanism with positively driven motion sequence, a ball guide, and elastic cushioning rings or pads at both ends, yielding a repetition accuracy of 0.06 mm, zero max. gripper jaw angular play, and zero max. gripper jaw backlash. Operating at pressures from 1 bar to 7 bar (0.1 MPa to 0.7 MPa / 14.5 psi to 101.5 psi) with a maximum operating frequency of 1 Hz and a minimum opening time of 120 ms at 6 bar, the unit supports position sensing via proximity switch and excludes specific metals by mass as outlined in the manufacturer variants. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8141745 is an industrial miter gear unit featuring an 80 mm gearbox and motor flange size with a 12:1 gear ratio. It delivers a continuous output torque of 120 Nm, a maximum output torque of 192 Nm, and operates at a maximum actuator speed of 7000 rpm within a temperature range of -25 °C to 90 °C. Built with an IP54 degree of protection, 0.25 deg torsional backlash, and VDMA24364-B2-L LABS conformity, this RoHS-compliant component weighs 5000 g and supports a maximum efficiency of 94 %. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo remote commissioning service, part number 8136845, provides expert on-site and remote support for 1-axis systems equipped with a safety module. Encompassing three hours of on-site work, the service includes data backup, documentation, Festo Automation Suite software introduction, configuration, parameterization, system testing, and verification of electrical connections and travel paths. Service provision is scheduled within 8 to 10 days subject to agreement, and requires customer-provided prerequisites including mechanical YJKP kit assembly, necessary voltage supplies, local software installations, and a stable internet connection. Submit the exact part number, quantity, and application requirements to request a quote for this Festo service.
View product details →