Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8092109 is a double-acting industrial component featuring a 25 mm piston diameter and a 20 mm stroke, operating within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4]. This piston rod design incorporates elastic cushioning rings at both ends, position sensing via a proximity switch, an external thread on the piston rod end, and a cleanroom suitability rating of ISO Class 5. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8097469 is a mechanical 2-way ball valve featuring a soft sealing principle, a nominal width DN of 25, and a 24 mm inside diameter. Constructed for in-line installation with any mounting position, it utilizes an ANSI B16.5 class 150 flange connection, an ISO 5211 compliant F0405 flange hole pattern, and a reversible 2/2 valve function handling media temperatures from -20 °C to 200 °C. The unit achieves a nominal pressure rating of PN 20, a flow rate Kv of 87 m³/h, and a breakaway torque of 12 Nm at nominal differential pressure while supporting compressed air, inert gas, vapor, water, and neutral liquids. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8102834 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 160 and an F07 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle, operating within a pressure range of 2 bar to 8 bar. Certified for safety functions to ISO 13849 and IEC 61508, the unit functions as a safety device up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture by switching to the defined safety position through spring force when compressed air is switched off and the spring chamber is exhausted. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8106574 is a magneto-resistive position sensor featuring a design for round slots and an NPN, N.O. contact switching output operating within a 6 V to 24 V DC range. This RoHS-compliant component includes short-circuit and reverse polarity protection, a maximum output current of 200 mA, a maximum DC switching capacity of 4.8 W, a 4 µs on time, and a 1 V voltage drop across an ambient temperature range of -4 °F to 176 °F. Electrical connection is provided via a longitudinal cable with a socket utilizing an M8x1 A-coded 3-pin connection technology per EN 61076-2-104 and a black PVC sheath. Submit the exact part number, quantity, and application requirements to request a quote for this industrial component.
View product details →
Festo
The Festo FBS-M12-5GS-PG9 (175380) plug is an industrial component manufactured by Festo, identified by GTIN 4052568075026. This official Festo plug facilitates specific connection tasks within automated systems according to its designated part specifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered by Festo with a 25 mm piston diameter and a 35 mm stroke, this double-acting industrial component features a piston rod at one end with an external thread and elastic cushioning rings at both ends. It operates on compressed air within a pressure range of 0.6 bar to 10 bar across an ambient temperature span of 0 °C to 80 °C, supporting position sensing via a proximity switch and functioning in any mounting position. The unit delivers a theoretical advancing force of 295 N and a retracting force of 247 N at 6 bar, meeting ISO 14644-1 Class 5 cleanroom suitability and VDMA24364-B2-L LABS conformity with a CRC rating of 1. Submit the exact part number 8092108, quantity, and application requirements for a formal price and lead time quote.
View product details →
Festo
The Festo 8106573 is an industrial component designed for round slots utilizing a magneto-resistive measuring principle to measure position across an ambient temperature range of -4 °F to 176 °F. Featuring an NPN switching output with an N.O. contact function, this RoHS compliant device operates on a DC voltage range of 6 V to 24 V, delivering a maximum output current of 200 mA, a 4 °s on time, and short-circuit and reverse polarity protection. Electrical connection is achieved via a 3-wire PVC cable with an open end in a longitudinal orientation and a black sheath. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8097468 is a mechanical 2-way ball valve featuring a soft sealing principle and a 20 mm nominal width DN 20 inside diameter. Designed with an in-line installation mounting type and ANSI B16.5 class 150 flange fitting connections, this 2/2 reversible component supports a nominal pressure PN of 20 and a flow rate Kv of 59 m³/h across media including vapor, compressed air, inert gas, water, and neutral liquids ranging from -20 °C to 200 °C. It incorporates an F0304 flange hole pattern, an ISO 5211 and ANSI B16.5 class 150 normative basis, and a breakaway torque of 10 Nm at nominal differential pressure. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8102833 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 160 and an F07 flange hole pattern. This safety device operates with a 90-degree swivel angle, an operating pressure range of 2 bar to 8 bar, and an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. It incorporates a spring assembly safety function that switches the actuator to a defined safety position when compressed air is switched off and the spring chamber is exhausted, achieving certifications for safety functions up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture according to ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8092107 is a double-acting industrial component featuring a 25 mm piston diameter and a 15 mm stroke with an external thread on the piston rod. It operates within a pressure range of 0.6 bar to 10 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4], with oil lubrication permitted and subsequently required. This unit incorporates elastic cushioning rings at both ends, achieves cleanroom suitability of ISO Class 5, and delivers theoretical forces of 295 N advancing and 247 N retracting at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8106572 is a magneto-resistive position industrial component designed for round slots featuring a PNP switching output with an N.O. contact function. It operates within a DC voltage range of 6 V to 24 V, providing a maximum output current of 200 mA, a 4 µs on time, short-circuit protection, and reverse polarity protection across an ambient temperature range of -4 °F to 176 °F. Electrical connection is established via a longitudinal 3-pin cable with an M8x1 A-coded socket conforming to EN 61076-2-104, utilizing a black PVC cable sheath, and the entire assembly is RoHS compliant. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo part number 8097467 is a mechanical 2-way ball valve featuring a soft sealing principle and a 15 mm inside diameter with a nominal width DN of 15. This 2/2 valve provides a reversible flow direction with a flow rate Kv of 32 m³/h, operating at a nominal pressure PN of 20 and a medium temperature range from -20 °C to 200 °C across vapor, compressed air, inert gas, water, and neutral liquids. Engineered with an ANSI B16.5 class 150 flange fitting connection and an F0304 flange hole pattern, it mounts in any position for in-line installation while exhibiting a breakaway torque of 8 Nm at nominal pressure. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo FBS-SUB-9-WS-CO-K (533783) is an industrial plug identified by GTIN 4052568086626. This authentic Festo component corresponds to the official product name FBS-SUB-9-WS-CO-K (533783) Plug. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component features a size 160 valve actuator with a single-acting gear rack and pinion structural design, a 90-degree swivel angle, and an F07 flange hole pattern. The unit operates within a pressure range of 2 bar to 8 bar and includes a safety function that switches the actuator to a defined safety position via spring force when compressed air is exhausted. Certified to ISO 13849 and IEC 61508 for safety functions, the device supports applications up to SIL 2 in low demand mode and SIL 3 in redundant architectures. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8092106 is a double-acting industrial component featuring a 25 mm piston diameter and a 45 mm stroke with elastic cushioning rings at both ends. It operates within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4] and maintains ISO 14644-1 Class 5 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8106571 is a RoHS-compliant magneto-resistive industrial component designed for round slots to measure position within an ambient temperature range of -4 °F to 176 °F. Featuring a PNP switching output with a N.O. contact function, this unit operates on a 6 V to 24 V DC range and includes short-circuit and reverse polarity protection with a maximum output current of 200 mA, a max switching capacity DC of 4.8 W, a 4 µs on time, and a 1 V voltage drop. Electrical connection 1 utilizes a 3-wire open-end cable with a longitudinal orientation, featuring a black PVC cable sheath. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8097426 is a digital, electropneumatic positioner featuring a linear potentiometer sensing range of 0 degrees to 115 degrees and a fast 20 ms cycle time for both single-acting and double-acting modes. It operates within a pressure range of 0.14 MPa to 0.8 MPa (1.4 bar to 8 bar / 20.3 psi to 116 psi) utilizing compressed air meeting ISO 8573-1:2010 [7:4:4] standards, alongside a 4–20 mA analog input with HART communication and a 480 ohm input impedance at 20 mA. Configuration is managed through an LCD display and onboard keys, supported by reverse polarity protection and an air performance capacity ranging from 270 l/min to 380 l/min at Δp = 6 bar. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo size 120 industrial component features a single-acting gear rack and pinion structural design with a 90-degree swivel angle and an ISO 5211 standard valve connection. This safety device operates at a nominal pressure of 6 bar (87 psi) with an operating range of 2 bar to 8 bar and includes a spring assembly that switches the actuator to a defined safety position when compressed air is removed and the spring chamber is exhausted. Certified for safety functions according to ISO 13849 and IEC 61508, the unit supports up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo FBA-CO-SUB-9-M12 (540324) is a fieldbus adapter manufactured by Festo, identified by GTIN 4052568090357. This industrial component integrates designated connectivity features for specified automation network architectures. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo ASCF-T-S6-Z is an industrial component featuring an inscription label holder material made of PP and a product weight of 1 g. This RoHS-compliant part conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →