Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo industrial component, part number 8062804, features a 300 mm working stroke, size 45 structural design, and an integrated recirculating ball bearing guide supporting any mounting position. It achieves a maximum speed of 1.5 m/s, maximum acceleration of 15 m/s², and a 100% duty cycle with position sensing via proximity switches or inductive sensors. Built with IP40 protection, CRC 0 corrosion resistance, and ISO 14644-1 Class 7 cleanroom suitability, the unit withstands a max torque of 5.5 Nm, max forces Fy and Fz of 880 N, and moments of area Iy of 140000 mm⁴ and Iz of 170000 mm⁴ within an ambient temperature range of 0 °C to 50 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 8059272, features a 10.5 mm nominal width and a G3/8 internal thread pneumatic connection 1. Operating within a pressure range of -0.095 MPa to 1.2 MPa and an ambient temperature range of -10 °C to 60 °C, this 114 g unit utilizes nickel-plated brass housing, NBR seals, and high-alloy stainless steel internal elements for compressed air media according to ISO 8573-1:2010 [7:-:-]. It achieves a normal nominal flow rate of 1203 l/min to 2083 l/min alongside a standardized flow rate of 1304.1 l/min to 2258 l/min, maintaining RoHS compliance and a low corrosion stress classification. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8049238 is a 20 mm wide, 5/2-way monostable industrial component featuring a mechanical roller lever piston gate valve with a soft sealing principle and direct control. It delivers a normal nominal flow rate of 750 l/min through G1/8 pneumatic working ports across an operating pressure range of -0.95 bar to 10 bar, utilizing a mechanical spring reset and positive overlap lap. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention and protection, this unit accommodates a maximum switching frequency of 3 Hz, a 30-degree cam angle, and a hard max stroke limit of 11.6 mm with a max actuating speed of 1.4 m/s, presenting a noted risk of pinching during operation. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8047678 is an industrial component featuring an angled square socket for field device connection via an M2 central screw on an air solenoid valve, complemented by a 2-wire open-end cable for the control side. Operating on a nominal 24 V DC with a voltage range of 20.4 V to 26.4 V, this unit integrates a yellow LED signal status display, a protective circuit, holding current reduction, and a contact durability rating of 50. Weighing 170 g, the assembly includes two occupied pins on both electrical connections and is supplied without a label holder. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8062803 is an industrial guide unit featuring a 200 mm working stroke, size 45 dimensions, and a recirculating ball bearing guide supporting any mounting position. Designed for position sensing via proximity switches and inductive sensors, it operates at a 100% duty cycle with a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and handles maximum forces of 880 N for both Fy and Fz alongside an Mx torque of 5.5 Nm. It complies with VDMA24364 Zone III LABS conformity, features ISO 14644-1 Class 7 cleanroom suitability, and provides F1a suitability for Li-ion battery production within an ambient temperature range of 0 °C to 50 °C and an IP40 degree of protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
Engineered by Festo, the part number 8059271 is an industrial component featuring a 10.5 mm nominal width and a G1/4 internal thread pneumatic connection 1. The unit operates within a pressure range of -0.095 MPa to 1.2 MPa and handles compressed air according to ISO 8573-1:2010 [7:-:-], supporting normal nominal flow rates from 1183 l/min to 2050 l/min normalized to DIN 1343. Constructed with a nickel-plated brass housing, NBR seals, a high-alloy stainless steel spring, and a POM inner raceway, this 124 g component functions at ambient temperatures between -10 °C and 60 °C with a corrosion resistance class of 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8049237 industrial component features a 20 mm width and a mechanical one-way roller lever structural design for direct control with movement-level mounting position. This unit includes galvanized steel actuator attachments, screwed-on mounting, and a low corrosion stress CRC 1 rating with VDMA24364-B1/B2-L LABS conformity and RoHS compliance for an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8047677 is an industrial component weighing 90 g, featuring an angled square socket field device connection with 2 pins that mounts onto an air solenoid valve via a self-tapping screw and connects on the control side to an open-ended cable. Equipped with a yellow LED signal status display, holding current reduction, and a protective circuit, this hardware carries ATEX and UKEX Zone 2 explosion prevention certifications for gas environments under category II 3G with Ex ec IIC Gc X ignition protection and EPL Gc (GB) certification outside the EU. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8049236, features a structural design with a one-way roller lever and mechanical actuation for direct control. The unit has a 20 mm width, a galvanized steel actuator attachment, and a screwed-on mounting type designated for movement level positioning. Operating within an ambient temperature range of -10 °C to 60 °C, the assembly conforms to VDMA24364-B1/B2-L LABS requirements, maintains a low corrosion stress CRC 1 classification, and complies with RoHS material standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8059269 is an industrial component featuring an 11 mm nominal width and an external thread G1/2 pneumatic connection 1. Operating with compressed air as per ISO 8573-1:2010 [7:-:-], it handles a pressure range of -0.95 bar to 12 bar and provides a normal nominal flow rate between 1233 l/min and 2016 l/min. Constructed with a nickel-plated brass housing, NBR seals, and a high-alloy stainless steel spring, the unit weighs 113 g and requires a nominal tightening torque of 14 Nm with a ±20% tolerance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8062802 is an industrial guide featuring a structural design with a recirculating ball bearing guide and a 100 mm working stroke in size 45. It supports any mounting position, position sensing via proximity switches or inductive sensors, a max acceleration of 15 m/s², a max speed of 1.5 m/s, and a 100% duty cycle, with max forces of 880 N for Fy and Fz, and a max torque Mx of 5.5 Nm. Rated IP40 with a 0 °C to 50 °C ambient temperature range, it exhibits 2nd moments of area Iy of 140000 mm⁴ and Iz of 170000 mm⁴, CRC 0 corrosion resistance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and reduced Cu/Zn/Ni values suitable for Li-ion battery production. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8047676 industrial component features an angled square socket field device connection with 2 pins and a self-tapping screw for mounting on an air solenoid valve, paired with an open-end control side cable. Certified for Zone 2 ATEX, Zone 2 UKEX, and EPL Gc (GB) explosive atmospheres with Ex ec IIC Gc X gas ignition protection, it includes a yellow LED signal status display, protective circuit, and holding current reduction. Weighing 50 g with a contact durability of 50, this unit operates without a label holder on the cable designation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8049235 is an industrial component featuring a 20 mm width, mechanical actuation, and a structural roller lever design for direct control. Built with galvanized steel actuator attachments and a screwed-on mounting type, this unit operates within an ambient temperature range of -10 °C to 60 °C at a movement level mounting position. It complies with RoHS material notes, VDMA24364-B1/B2-L LABS conformity, and possesses a low corrosion stress CRC 1 classification. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8059268 is an industrial component featuring a 10.2 mm nominal width, an external thread G3/8 pneumatic connection 1, and an operating pressure range of -0.095 MPa to 1.2 MPa (-0.95 bar to 12 bar / -13.775 psi to 174 psi). Constructed with a nickel-plated brass housing and threaded coupling, NBR seals, high-alloy stainless steel spring, and a POM inner raceway, this RoHS-compliant part supports a normal nominal flow rate from 1216 l/min to 2083 l/min (normalized to DIN 1343) and an ambient temperature range of -10 °C to 60 °C. It is designed for compressed air operation according to ISO 8573-1:2010 [7:-:-] with lubricated operation possible, possessing a CRC rating of 1 and a nominal tightening torque of 12.5 Nm with a ±20% tolerance at a 98 g product weight. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8062801 is an industrial component featuring a size 32 structural guide design and a 600 mm working stroke integrated with a recirculating ball bearing guide. This unit accommodates any mounting position, provides position sensing via proximity switch or for inductive sensors, and achieves a max speed of 1.5 m/s alongside a max acceleration of 15 m/s² at a 100% duty cycle. Rated to IP40 with an ambient temperature range of 0 °C to 50 °C, it delivers a max force Fy and Fz of 356 N, a max torque Mx of 1.3 Nm, 2nd moments of area Iy of 38000 mm⁴ and Iz of 45000 mm⁴, CRC 0 corrosion resistance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 7 cleanroom suitability, and reduced Cu/Zn/Ni values (F1a) for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8049233 is a mechanical industrial component featuring a 20 mm width and a structural roller lever design for direct control. Built with galvanized steel actuator attachments, this unit has a low corrosion resistance class of CRC 1, VDMA24364-B1/B2-L LABS conformity, and RoHS compliant materials. It is configured for screwed-on mounting at the movement level and operates within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8047675 is an industrial component weighing 170 g, featuring a yellow LED signal status display alongside holding current reduction and a protective circuit. It is certified for explosion prevention and protection in Zone 2 for ATEX and UKEX, with an ATEX gas category of II 3G, Ex ec IIC Gc X ignition protection, and EPL Gc (GB) certification. Electrical connection 1 on the field device side utilizes an angled square socket with 2 pins, connected via a self-tapping screw and connection diagram ZC for mounting directly on an air solenoid valve without a label holder. Electrical connection 2 on the control side consists of an open-ended cable with 2 occupied wires and a contact durability of 50. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8059267 is an industrial component featuring a nominal width of 7.8 mm, an external thread G1/4 pneumatic connection 1, and an operating pressure range of -0.095 MPa to 1.2 MPa (-0.95 bar to 12 bar / -13.775 psi to 174 psi). Constructed with a nickel-plated brass housing, NBR seals, a high-alloy stainless steel spring, and a POM inner raceway, this 95 g unit supports compressed air operating media per ISO 8573-1:2010 [7:-:-] with optional lubricated operation. It delivers a normal nominal flow rate of 1183 l/min to 1966 l/min (normalized to DIN 1343) and an ISO 8778 standardized flow rate of 1282.4 l/min to 2131.1 l/min within an ambient temperature range of -10 °C to 60 °C, requiring a nominal tightening torque of 11 Nm with a ±10% tolerance. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8062800 is an industrial guide component featuring a size 32 specification and a 500 mm working stroke. Built with a recirculating ball bearing guide and structural design for any mounting position, it accommodates position sensing via proximity switch or inductive sensors with a maximum speed of 1.5 m/s, a maximum acceleration of 15 m/s², and a 100% duty cycle. Operating within an ambient temperature range of 0 °C to 50 °C, this IP40-rated unit achieves ISO 14644-1 Class 7 cleanroom suitability and VDMA24364 Zone III LABS conformity with zero corrosion stress resistance, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8049146, features 8 device locations and a wrought aluminum alloy sub-base weighing 172 g. Designed with through-hole mounting, it incorporates a G1/8 pneumatic connection 1 alongside a tightening torque range of 0.3 Nm to 3.3 Nm. The assembly complies with RoHS material standards, achieves corrosion resistance class CRC 2 for moderate corrosion stress, and meets VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →